ORIENTFAHRTEN - A semi connected script style font design.
It is losely based in the lettering seen on a poster design by German designer/painter Ottomar Carl Joseph Anton. (original shown in comments)
When completing the full alphabet I tried to incorporate the features from the provided letters the best I could while creating the remaining missing characters.
SInce its a semi connected style lettering, certain characters were deliboratly disconnect and some weren't. For example the Uppercase string is almost completelty disconnected, whereas most of the lowercase characters connect.
This can also be seen in the original Ottomar poster.
For the connected lowercase characters there has been made a alternative glyph that disconnects to make more pleasing looking breaks, and are located in the Unicode Block “Halfwidth and Fullwidth Forms”.
It contains both proportional oldstyle (default) & lining numerals, with the lining located in the Unicode Block “Halfwidth and Fullwidth Forms” as well.
I hope you like it!
cheers
I went and mangled Spelunker by Zephram. I am messing with the shapes of the spaces between the letters. The name of the font indicates that most of the letters are wearing bell bottoms.
This is a clone of SpelunkerHere is a gift to the community.
-----------------------------------------
This is a collection with parts and bits for small grid designs, (5x5 max) Each related to the assembly of smooth and (near) Bézier-like curved shapes and round letterforms.
-----------------------------------------
As some of you might very well know, one of FontStruct's holy grail is custom circular and curved forms. I'm talking about those not simply build with off-the-shelf bricks from the standard brick pallet FontStruct is providing.
Making these can be a very difficult process. Since the bricks in the default pallet are a far cry from what is truly possible with some clever use of FontStruct's editor features. Although obviously there remain serious limitations when it comes down to making different curves and round forms, there still is a lot room available to work in.
Most of the seasoned users know and utilize this very well, but, as with each of us, it took time and dedication in order to learn the tricks of the trade!
With a little knowledge, clever thinking and a healthy dose of outside the box thinking one can still get a lot out of FontStruct.
This font is meant to serve as a helping hand and inspirational / educative tool. Providing some insight into making numerous curving and rounded forms, various transitions, achieving different weight contrasts, and how all the various building blocks were aligned in order to make the various parts.
-----------------------------------------
Most important features used for this process are:
Brick Size filter: Must be changed to a 2×2 value in order to use the elements in this font.
All functions found in the "Modify" menu: Flip rotation and nudge are used to make alignments and to fill up the gaps.
Make composite: (also found in the Modify menu) This function will mainly be used to do two tasks, resize, modify/distort brick shape,
placement and orientation of bricks within the brick grid square for the required given composite.
-----------------------------------------
The font itself contains a collection of different premade elements divided into 3 main groups that I will list bellow. And can be found in the uppercase, lowercase and numerals sections.
[Uppercase] Various pre-assembled variations of the letter O, to demonstrate different variations for a round letterform. These were sub-divided and grouped according to their relative height!
[Lowercase] "Copy & Paste"-ready isolated parts 'n bits (curve segments, terminals) aimed at re-constructing and use in your own projects
[Numerals] Various random examples of letters that have curved/round features implemented in some way.
A fonts height probably is the most dictating parameter in type design in terms of behavior and appearance. Therefor, with the collection of pre-build vatiations of the letter "O", I choose its relative height to further sub-divide them in, rather than weight, since these are already completed letterforms. This makes up for the easiest access to a "drag/drop" adaptation into one's own project and build a full font based upon it, mainly for those that come with only limited experience.
This tool is to make one's FontStuct experience a little easier or to save time. So feel free to clone it and use the content however you like.
Re-use any of the provided elements, copy/paste the letter examples into your own fonts, deconstruct and re-use the various parts. Or simply just take a peek under the hood to see how they were build, This can be done via the "Menu>View>'Outline' " function.
There are no restrictions to how the content is used.
-----------------------------------------
More additional curve variations and different related other elements will be added soon. I have to select them from my various random works and this takes some time. Please stick with me on this one.
The intent is to try keeping this a ongoing project, so hopefully many more updates will follow and eventually turn this into a "all-in-one" tool for small grid designs. So far I also have plans for including a collection with different serif style, but this is something for a future update as well!
For now, curvatures it is!
-----------------------------------------
Note that, all content and forms in this font were created by myself and were gather from the various projects I have made, most came from published works, but some were taken from private material as well. We all here work with the same tool + limited brick set, so I am pretty sure certain elements in here were done exactly the same way by other users. Please don't accuse me of using others or your material without approval, this is just a case of unfortunate coincidence.
-----------------------------------------
[Usage]
The elements are best used by way of copying them from this into your personal projects, and work with it from there! This because the "My Bricks" pallet in this font is messy, probably very uncomfortable to work with as is. Copy & pasting them into your own font re-arranges the selected brick set for that segment into your own font's "My Bricks" pallet, making it much easier to get sense of its individual bricks.
Another very important thing is, I strongly advice not to nudge any of these what so ever, unless investigated its composition first. And I cannot rephrase this enough, seriously, never, or brace yourself for absolute dire results!
This due to the numerous counter-rotated or different directions of nudged 'into place' elements that make up a complete segment.
There are some elements included that at first seems to be looking like doubles, with onother one looking exactly the same. This is right, but these are constructed using different configurations of bricks. The reason for this is to provide alternative configurations for them. Some scenario's can make one approach to be working just fine, and the other simply not. This all hangs in strong correlation with the current nearby configuration of bricks, and simply depends on the whatever spot still remains unused in the surrounding grid. Since available grid locations to start working from are usually very limited. Its like this, Taller and/or wider letterforms meaning more available space to work from and place your bricks, but the smaller you go, the more scarce space becomes, simple as that.
So best is to use and work with this tool on a copy of your current glyph to verify no bricks will be raplaced and ruin the current glyps, and only to replace the original glyph once you're absolutely sure everything worked out well together.
If something else isn't clear or if you have any questions in regard to this tool, feel free to ask those in the comment section bellow.
-----------------------------------------
One final thing, beware that some of this elements can possibly influence the font vertical metrics (font size and leading/vertical spacing) and create addition extra line spacing. As well as the letter width. So be sure to allways double check those two when u use any of this.
-----------------------------------------
PS: My apologies for the "too much" of a explanation above, lol.
Happy structing,
cheers
STF_DERBY - Condensed Geometric Neo-Grotesk sans.
The idea was to make a typeface design that would suit small point size body style typography.
■ Multilingual support (94 languages)
■ Partial kerning WIP (8694 Pairs and counting)
==============================================
The fontstruction is a Faux Bezier style approach, to allow the most freedom in shaping the different letterforms and curves.
Font sample is best viewed at 2x pixel size or above for a sharp result.
I hope you like it!
Another attempt to make a readable font narrower than Arial Narrow. I am basing the letters on ovals now, to try to make them easier for my eyes to deal with at small sizes. Works well at size 9. Arial Narrow is still better than this at size 8.
This is a clone of UrialTextura Reticulata, my first font. I began with the intent of replicating my own textura quadrata calligraphic hand, but decided against approximating the heavily-rounded majuscules with small line segments and ended up mostly inventing a majuscule set. I feel like the minuscules are a good approximation. The Ogham set are, of course, what you would expect to get if transcribing them with a roundhand nib. And I made use of various unused unicode slots to add some non-canonical Ogham characters for one of my own projects.
This font atempts to represent letters that look like what is called the "God's Eye" yarn project for children, which has to do with winding colorful yarn around two crossed sticks. I've decided to double the size so that the X and T have the same internal dimensions.
See more:
https://fontstruct.com/fontstructions/show/2231576/circ-14
https://www.fontstruct.com/fontstructions/show/1721148/lr-syche
https://www.fontstruct.com/fontstructions/show/851715/dolphin_sans_3
https://www.fontstruct.com/fontstructions/show/787470/fs_semi_circle
This is the 7/6 block version. I've been liking this weight for programming at size 8.
Friendly Geek:
Good for...
- Labels
- Upper case
- Code
- Table cells
- Outlines
- Display
- Printing
- Informality
Not Good for...
- Normal Text
- Sentences
- Formality
Sometimes Good, Sometimes not...
- For each display screen size, one or two weights work well
I have changed the 'h' and the '+' to work better for programming. Changed the 'F' to make it more clearly different from the 'f'. Before it was looking a little bit like lower case somehow.
This is a clone of Friendly GeekThe idea is to read other alphabets as if they were Roman.
This is a clone of CheckovsFunAnother recap from one of the works by great Dutch graphical designer "Jurriaan Schrofer".
This time I revisited a design that originally was made back in 1975 for the Dutch Post Office (PTT) office build floor plans.
Recap from one of the alphabets originally designed by Dutch graphical designer "Jurriaan Schrofer".
The Letters were Originally designed for the Giro office building floor plan!
========================
This is a style variation in the "ETAGE AANDUIDING" typeface family.
Enjoy!
Another recap in a series to attempt to re-create some of the works from late great dutch graphic designer "Jurriaan Schrofer" (15 april 1926 – 1 juli 1990).
This time I revisited the lettering for "A.S.C. COMMUNICATIONS" and completed the alphabet and some additional punctuations.
I hope you like it.
Collection of linear-interpolated circle attempts, or simply faux-Bezier circles and other curvature related materials.
This toolset basically is collection of pre-made fake circles and curves in numerous different sizes to make ones workflow easier. It could also simply serve as a educative tool that demonstrates the basic FontStruct technique used for making fake curves and circles.
Initially I intended this to be much more complete, but it is simply too much work, and would take forever to get published at once.
Please don't expect this to be perfect, a lot gets fairly close to the "real-deal".
But keep in mind that they remain raw approximations of their true Bezier counterparts. I will try to improve whatever is needed as time progresses, as well as most likely add more stuff.
--- No filters were used ---
I hope you like it so far,
Feel free to copy, re-use, improve or even destroy!
enjoy!