A chimera (fusion) which combines inline-versus-outline, maze, Gemscript, and other techniques to produce a timeless look.
*
Original size: 6.75pt (use multiples of this value for pixel perfection)
Design Rules:
1. Square bricks only.
2. A 1px soft border of negative space must exist between lines whenever possible.
3. Glyphs must fill the 9x9 grid to the greatest extent possible given the rounded style.
4. The set of glyphs shall be a heterogeneous mix of symmetrical and asymmetrical forms.
5. Negative space will replace positive in any situation wherein the small grid size or the geometry of a letterform would be detrimental to the chosen style. This includes all situations where any shape lacks at least a soft 1px border of negative space around it.
See also: Terran Pixelcruiser
I wondered what a plain version of Candylander would look like, so I made this. :D
I think a fully half-arc version could look even more stylish than this! Hope to find time to create one soon. (EDIT: Done, see Migrator)
This is a clone of CandylanderExperimenting with a new letter concept. This is not the final concept of course, but I developed this along the way, so I kept it.
For best results, use upper and lower case on seperate layers, then merge them together.
Experimental brush/pen thing. Has a slightly spooky look. Because of their tapering curves, many glyphs can render with a "split" or "stencil" look about them. This is due to software-imposed limitations on vector rendering. Designs which share this property can be considered Pseudostencils.
This design is not informed or inspired by any existing typographical traditions. I set out to make the "claw" bricks (as I call them) into a font and this is the result.
*
An alternate, more asymmetrical & stylized Madmouse.
This could be considered an avantgarde spurless or mixed-spur design. Some letters have spurs and some don't. This is entirely dependent on the diagonal lines, which were placed so that they would slant up and to the right. "s27" are obvious exceptions.
This is a clone of MadmouseLawgivers' font. Vertical members are doubled, horizontal members are not - except when needed to complete vertical members. Overhangs and bends help to make glyphs more distinctive.
Original size: 5.25pt (use multiples of this value for pixel perfection)
Another conlang/conscript from my own works. These are the Symbols of Starborn Lightness used by Asgari.
Asgari is an artificial sun orbiting Gara, an interstellar planet. It was built to use Starborn Lightness symbols as concept-units in order to electronically convey information to the Garai people about itself. So, these symbols were originally something like status indicators. Until C.Y. 1997, they could be seen on displays in the Celestial Telemetry Room at Magong Stack One in Upper Netazeca.
However, some Garai re-used the symbols to make constructed languages and ciphers. Monsaic Sun is unique among these in that it uses only the existing symbols, without any alteration. So this font can be used to write either language.
Appears in: Seven Candles Trilogy (2013)
A miniaturized version of Madufaros with many subtle aesthetic changes.
I may condense it further, by removing certain details (such as the backs of "f" and "t" along with the projecting front part of "l"), but I'm satisfied with it as-is for now... more testing must be done...
This is a clone of MadufarosA 12x12 pixel font designed for use alongside microfonts, especially the "Derpberd" family it's modeled after. These large letters help decorate the start of a new chapter in a manner similar to the art fonts of illuminated manuscripts. I think this makes a decent "high-tech" or "board game" font, too! :D
Alternate style on lowercase (alternate ,.!? are on <>/~). The symbols and numerals have a slightly altered frame to help differentiate them and add some flavor.
A fairly standard 5x5 design with a little added flair. The sort of text you might expect to see in fantasy maps and atlases.
Uppercase only!
Original size: 3.75pt (use multiples of this value for pixel perfection)
By request, a "junk font". Looks pointy, glitchy, fuzzy, janky, grungy, burned, rusty, distressed by power tools, or some superposition of ONE OF THESE OR MORE, depending on the size used and the rendering effects (antialiasing, smoothing, etc).
Rather than force the letters into convincing classical forms, I focused on making sure each letter was thoroughly scrambled. This design could in theory be used with an image-recognition script in order to be put to cryptographic uses... the result would be fun, but not very efficient or crackproof. UC is the same as LC, at least for now.
The original brick-of-bricks is located on ".". This is the template from which the other glyphs were made.
*
Design Rules:
1. Up to 25 distinct bricks from the palette may be used in the overall construction.
2. Each glyph will incorporate a heterogeneous mix of these bricks.
3. Bricks may not be flipped, rotated, stacked or composited.
Linestrider's two-lined little brother.
*
Probably won't update this one again, because it uses a lot of brickswapping and so it is likely to get corrupted by additional editing/saving.
This is a clone of LinestriderSuper-tiny! This begins to approach the lower limits of visual interpretability. It's still far more readable than any 3x3 pixel font I've yet seen, though.
Like Four on the Floor, this font uses every trick I have picked up as a pixel artist and font artist to make itself as readable as possible. I consider this one suitable for general reading (e.g. when making pixel art tutorials or depicting book texts in pixel games), but only just.
Original size: 3pt (use multiples of this value for pixel perfection)
Pixel gothic somethingorother. Diabolical + Malicious = Diabolicious.
Original size: 5.25pt (use multiples of this value for pixel perfection)
Recommended: Use with kerning turned ON!
My attempt to do something different with Structurosa.
With such a small grid and such a distinctive look, it was hard to alter the concept without turning it into something else. The fact that I didn't bother looking at any references save for the FS logo itself probably didn't help. Out of all my experiments, I thought this one looked the best and most original, so here it is.
A design that combines decolike asymmetry with a double line concept. It also incorporates some experimental methods to unify the wider glyphs (mw@#™, etc.) with the others, by allowing the middle sections of these letters to have both the single and double lines. This results in a look that is at times architectural and at other times almost like loopy cursive.
Version 1.3: Added Polish.
* $ * £ * ¢ * ¥ * $ * £ * ¢ * ¥ * $ * £ * ¢ * ¥ * $ * £ * ¢ * ¥ * $ * £ * ¢ * ¥
Another simple experiment with composites, this time trying to make a font which can easily accomplish a "diamond encrusted" or "disco floor" style effect within my graphics software.
SPOILER: I succeeded. :D
* $ * £ * ¢ * ¥ * $ * £ * ¢ * ¥ * $ * £ * ¢ * ¥ * $ * £ * ¢ * ¥ * $ * £ * ¢ * ¥
This is a cloneAn experimental logotype and another attempt to create a distinctive design in 2x2. Some words look better than others... it's best for 1-2 word phrases rather than body text.
"B", "P", and "R" are compromise designs... no satisfactory way exists to create their curves while maintaining the optimal line width, so their counters were filled a bit to give them the same sense of solidity as the other letters.
*
A "denghon" is a giant, many-limbed, extradimensional creature found throughout my games, especially ESOS.
My attempt at making a Unown font where all the letters are consistent in size. This is original pixel art made using a high-res reference. It's made to be a nice-looking design, not to be 100% accurate to the games. Upper case is fully kerned.
"We Dunno" is an anagram for "Unowned".
Original size: 6.75pt (use multiples of this value for pixel perfection)
Recommended: Use with kerning turned ON!
(WIP)
An attempt at an angular, futuristic Fraktur design. It's also inspired by ancient Greek stonecarvings, or at least, the way such carvings are depicted in comics and cartoons. It has a lot of intentional asymmetry to make it look quirky and slightly comical. (I tried making everything symmetrical with composites, but it looked boring!)
I welcome any suggestions for this one. I've never tried to make a "normal" Fraktur, only avantgarde ones, so I'm not very knowledgeable about the style.
Latin alphabet in an Ashrian style, mostly using a 2x3 grid, and using only stacked triangular bricks. Capital letters represent the full letterforms and lowercase letters represent the truncated letterforms used in Ashrian printing and computer systems.
Ashrians are the inhabitants of Planet Ashr in my RPG video game "Seven Candles". Their signmakers, carvers, and woodworkers used triangular gouges for millennia to make their letterforms.
VERSION HISTORY:
16 Mar 2018 - v1.0 released.
Welp, I had to make something like this sooner or later... :^)
Like most of my pixel fonts, this was made at the smallest legible size I could manage, so that it could be useful even to small-canvas pixel artists.
More glyphs later, perhaps? Depends on the use I find for this in my games (and your comments).
Original size = 26px (Use multiples of 19.5pt for pixel perfection)
The name is inspired by Slab City, California. Search that name on Youtube for some interesting documentaries and such!
A continuation of Tangereen. This version took a lot of figuring out and a lot of changes, both aesthetic and structural. I managed to make it different from other double-line designs like Glitzfang and Junglira while still keeping it simple and cute.
This is used in FS Tutorials, FS Idea Soup, FS Obscura, and most recently, AMFA's 3D printed parts.
This is a clone of TangereenThe "TB" stands for "tuberculosis", which is probably what this font has. Still, it was fun to try to create authentic blackletter on such a small grid!
Original size: 9pt (use multiples of this value for pixel perfection)