A more patterned version of Jungle High. This will be used for the title screen text.
It also gives me a bit of a "casino" feeling with its diamond pattern and ornate appearance.
This is a clone of Jungle HighI finally made a folded-/ribbon-style design. This one contains a number of experimental techniques. Most notably, the swept parts of glyphs are allowed to extend beyond the letterwidths and sometimes even the baselines. This enhances the sense of movement, creates some interesting linkages, and reduces the need for kerning.
All of these shapes can be constructed with paper or ribbon, although lots of clever folding tricks, doubling, and pinning down/securing with glue would be required.
Alternate tilde on "±".
Some kind of great big ol' chain.
In retrospect, I think it looks like a jewelry chain from a dwarven civilization. Perhaps the hypothetical jeweler cut and ground the stones in an imitation of some dwarven font!
When glyphs are used in isolation, they somewhat resemble carved signets or seals. Increasing the letter spacing allows you to create a variation of the design. (This is something that must be done in-software since the font will render as monospaced by default.)
*
12SEP2018: Added lowercase... the low resolution combined with the design method make it very difficult to render distinctive lowercase versions of every letter, but I'll keep working on it. There's a lot of similarity between pairs like S/5, Z/2, etc., so this font is most effectively used in forms of writing wherein context suffices to inform the reader as to the identity of each glyph (lists, prose, and technical writings). If you want to use this in a password system or something, I recommend using one case's glyphs only.
*
Design Rules:
1. Negative spaces will be areas of 0.5 bricks' effective length or width.
2. Negative spaces may exceed the 0.5 measurement only by increments of 0.5 and in only one dimension at a time.
3. Glyphs will fill their framed canvasses to the greatest extent possible while adhering to the other rules.
A space-esque design made for a friend! The angular counters give this a simplified geometry which makes it easy to read despite its looks. Works well for small- or large-scale applications - chat, terminals, logos, and more. Supports Dutch, English, and Greek!
The original was cloned off and preserved elsewhere. The version you see here has centered glyphs.
Small-grid doodle which creates new combinatorial forms.
I considered this design rather rough and unappealing until I gave it negative spacing. This caused the forms to merge together in unpredictable and interesting ways. The lesson here is that sometimes the metrics, not the aesthetics, are what "make" or "save" a design.
Version 1.5
*
Experimental slab-serif. The added height from the serifs is quantized so that the serifs, rather than the normal lines, determine a glyph's geometry.
It reminds me of the Wild West and the old cartoon "The Jetsons" at the same time. It uses two kinds of serifs: normal slabs and "hangover" serifs. The hangovers are the ones that look like overhangs. Is there another name for them? I don't know.
This font is set to appear in several games at once! I'm not the developer of any of them! WOO
Despite what you may have heard, a "hoedown" is just a party.
An evil electromagnetic zigzag tape reel. Looks almost embossed, as if the letters were "pressed" into the waves somehow. In that way it reminds me of old hand-operated label makers. It also makes me think of electricity, TV static, ocean waves, tire tracks, fractured glass, and more depending on font size and color.
The name is inspired by an attack from a notorious NES game, "Dr. Jekyll and Mr. Hyde".
Experimental mosaic... or maybe a new mineral species?
This one started as a doodle. I began placing circles to see what kinds of complex shapes I could make, and this was the result.
It achieves a new visual effect at almost every size up to the original. Also try slowly moving the zoom slider for some interesting animations!
*
This font is now nearly 1MB in size! I guess it has to do with the intrinsic complexity of circles.
A 6x6 font made to look thief-esque. Like a master thief, it attempts to hide in plain sight - putting on an "official" look, or even one that's reminescent of Merchants Guild. But something's wrong. Parts of it are a bit crooked, and the trained eye can easily see it for what it is. APPREHEND IT!
Original size: 5.25pt (use multiples of this value for pixel perfection)
SPOOKY GHOST FONT. A work in progress. Getting the right spooky apparition look is pretty intensive, but I managed to finish the basic character set before Halloween. :D
*
This started as a 5x5 design. After realizing S and Z would look far better if I made them 1 square taller, I converted the whole font to be roughly 5x6. At this low resolution, it's hard to get the degree of irregularity which I think makes these letters look ghostly... but, the idea is certainly present!
This design seems like it'd fit in with a lot of horror and science fiction stuff, too. Apart from the "smoky"/"ghostly" look, it has a "melted" one which suggests a hot place or maybe immersion in acid. It also looks a bit like slime, and finally at smaller sizes it has a glitch-esque appearance.
I took "Hypnoverse" and applied handwriting techniques to it. These figures are more like those I draw when I write with a pen, though still very distinct from my actual handwriting due to the low resolution.
This looks very natural to me, moreso than any other 4x5 design I've seen. It needs to be 2x original size or larger for the best effect, though, since its forms aren't nearly as open as the others. This may not be a problem for you... maybe I've just been staring at it too long...
At this point, I am confident that none of these glyphs can be improved further. The best they can do is change to suit someone else's preferences. Would you draw a particular glyph differently? If so, please show your ideas. I have gone over every 4x5 glyph several dozen times through as many designs, and think I have found the best solution for each - but maybe I'm wrong! I am especially interested in solutions for m and w; I have tried compressing and truncating them to be 4-wide before, but never successfully got anything that LOOKED like an m or w.
This is a clone of HypnoverseA pixel font which uses diagonal arrangements only, resulting in several optical illusions at once! It can appear to have solid lines, gradients, polka-dots, and more.
The negative spaces within the glyphs are as few as possible, to facilitate coloring them in. A few of them ("V", "W", "7", "^" etc.) are a bit arduous... I recommend zooming way in while coloring them...
In school I used to hand-draw fonts wherein every letter was cut down and relied on the letters around it to form itself. This is an attempt at doing the same with Fontstruct bricks.
"Cadcutters Print" is an anagram for "Truncated Script".
Since it's a bit tough to read it unambiguously, I also consider it a very weak cipher.
Original size: 5.25px (use multiples of this value for pixel perfection)
The original Scaffo Stencil - the plain version.
Swapping between the two produces an interesting effect which I'd like to explore more.
This is a clone of Scaffo StencilThe Zephiest of designs - a gaggle of Roman columns with gongs stacked on them.
Coquette Dynatype by bugmenot666 is one of my favorite fonts. It has an exotic look while being very readable and regular.
With Dynatype Z I tried to take the exotic aspects further without changing the core design too much. The lowercase got some alternates, too!
This is a clone of Coquette DynatypeAn avantgarde serif with a mild horror theme. It takes advantage of the properties of antialiasing/text smoothing algorithms to render a convincingly handmade aesthetic.
Making attractive, consistent, nonpixel serif designs at this grid size is quite a challenge. Making them look handmade is even moreso. I've tried that many times, but this design is the first such one I felt was truly usable. It doesn't quite look typewriter-esque, but blends well with other designs that are.
For this I used many different serif shapes, with each one depending on how the line it was attached to wanted to bend or terminate. This is in contrast to most other serif designs I've seen, in which the serifs themselves are more consistent in shape. I decided against faux-bezier curves for this, because they all looked way too polygonal. I think this is one of few cases where a rectangular O and S enhance the overall design rather than weakening it.
Font for the second remake of Jungle High, which was one of my first games. Originally for RPG Maker 2000, the game was later ported to Game Maker Studio for inclusion in Seven Candles Trilogy and is now being remade for the second time as a standalone game in a custom engine. This font was inspired by the original game's art (which I created) and will be used in the second remake.
This font makes me think of leaves and cabochon gems, both of which figure prominently in the games. Its slightly plantlike appearance makes it a good companion font for Goud, Junglira, or even Sahuagin.