Fontstructing since | 3rd February, 2018 |
Fontstructions | 718 shared, 35 staff picks |
Shared Glyphs | 92942 |
Downloads | 18524 downloads made of this designer’s work |
Comments Made | 1585 |
A semi-hollow pattern fill version of Graphene. Made for a friend.
This is a clone of Graphene BlackA minimalist Gemscript (or a corrupted one, depending on who you ask).
It has no relation to Pigpen Cipher, although a few glyphs do look like they're from that cipher. Feel free to use this fact to throw amateur cryptographers off for amusement.
Original size: 3.75pt (use multiples of this value for pixel perfection)
I wondered what a plain version of Candylander would look like, so I made this. :D
I think a fully half-arc version could look even more stylish than this! Hope to find time to create one soon. (EDIT: Done, see Migrator)
This is a clone of CandylanderA 2x2 design which started with a "split" aesthetic and ended up with a "stenciled" one. I embraced the change and now all these glyphs are functional as stencils. They contain minimal stacking and no composites.
In some cases the inside is connected to the outside at only one point. If you decide to use this for stencilling, I recommend using a stout material for the stencil and storing it with care.
The name comes from one of the many, many old joke bands which I created.
Recommended: Use with kerning turned on!
Paradoxy Effect, now with more dots.
This is a clone of Paradoxy EffectDonjon16: My take on a dungeon font. Create your layout with A-Z, move the caret to right after the room you want to edit, then type the letter for a trap, monster, and/or object and it will appear in that room. You can stack multiple smaller creatures or objects inside a room.
When one room's opening runs into another's wall, it makes a distinctive notch in the wall. I consider these to be closed or secret doors, but your design doesn't have to have them. :^)
Only the smaller monsters/items can fit into the corridors. However, you can fit up to three of the smaller monsters into a single corridor (5 if you use the 4-way corridor)!
This was actually designed to make minimap graphics for one of my games, and derives some inspiration from the maps in early Zelda games (The Legend of Zelda, The Adventure of Link, Link's Awakening, Link to the Past, etc.).
•: • : • : • : • : • : • : • : • : • : • : • : • : • : • : • : • : • : • : • : • : • : • : • :
- ROOMS & MAP SYMBOLS -
ÀÁÂÃÄÅÆÇÈÉÊËÌÍÎÏÐÑÒÓÔÕ = floor number markers (B7 to F16)
×ØÙÚ = compass markers (North, East, West, South)
ABCDEFGHIJKLMNOP = 16x16 rooms
RSTUVW = corridors
space bar = empty voids
•: • : • : • : • : • : • : • : • : • : • : • : • : • : • : • : • : • : • : • : • : • : • : • :
- PLACEABLE THINGS -
(These all have a negative spacing, so they must be typed AFTER the room you want to put them in.)
X = teleporter or Magic Stone
YZ = stairs up/down (They take up the entire room)
0123456789 = traps & hazards - spike trap, pit trap, ice trap, trapdoor trap, teleport trap, arrow/dart trap, etc. (They can overlap monsters; use some discretion)
abcde,fghij,klmn = small monsters - kobolds/goblins, humanoids/skeletons, slimes (They appear in a cross or X shaped grid, max 5 per room, 9 if you use them together)
opqr,stuv = medium monsters - skulls, bats/imps (They appear in corners, max 4 per room)
wxyz = big monsters - knight, dragon, serpent, big skull (They take up the entire room)
!@#$%^&*()[]{}\|<>?/:';" = equipment - weapons, armor, potions, maps/scrolls, runes, compass, and more (Usually takes up a whole room)
`~_=-+ = gold, gems, key, chests (Usually takes up a whole room)
àáâãäåæçèéêëìíîïðñòóôõö÷ = special characters (NOT YET IMPLEMENTED)
•: • : • : • : • : • : • : • : • : • : • : • : • : • : • : • : • : • : • : • : • : • : • : • :
- TIPS -
Make the dungeon layout first, THEN start adding things to it.
Better to have a treasure vault guarded by monsters in the next room than to try to cram them all into the same room. The same holds true with many traps.
If you use the floor number markers, you can have up to 23 floors in all - 7 below-ground and 16 above-ground.
•: • : • : • : • : • : • : • : • : • : • : • : • : • : • : • : • : • : • : • : • : • : • : • :
5x5 pixel font with a built-in scanline effect. Because of its subtractive nature and low resolution, some glyphs are impossible to depict.
*
Original size: 4.5pt (use multiples of this value for pixel perfection)
Fontstruct's first vacuum tube font!
This is a design inspired by Nixie tubes. Since these "tubes" are iconographic, they could theoretically represent 12AX7s, 6L6s, KT88s, or whatever tube/valve you wanted. Feel free to clone and build on this concept.
Fuzzy Logic, but the darkest halftone has been replaced with a copy of the lightest.
The bands in the overlapping regions are artifacts of the FS preview. They don't show up when the font is used elsewhere. However, any size which is not a multiple of the original can create a different type of banding... I recommend using this at larger sizes...
This is a clone of Fuzzy LogicFont used for the text of Poodle Caboodle Anthology, a compilation of short stories I wrote for the games Seven Candles, Trap Farmer Brer Brah, and Naively.
In this font the principles which I associate with "bookishness" are taken nearly to their logical end. This font is so bookish, it sometimes looks like a scaled-down, aliased version of a high-resolution font. It embraces its flaws in a highly methodical way which helps it cohere. It's also designed with speedreading in mind - something you can see in the simple curves of letters like aefgjrsy.
Font from the ingame marquee display of Barcade Brawl, a 2015 game by yours truly. This was made to look similar to the system fonts from old arcade boards, PC microsystems, etc. You've probably seen the fonts I'm talking about; they're everywhere and many people refer to them singularly as "the arcade font" or "the NES font".
This is 7x7 with no wasted matrix, but it looks better without monospacing since not every glyph is the same width. It also makes a decent terminal & chat font, at least for those who don't care about the case of the messages they read and write.
Feel free to use this in your games, etc.!
*
Original size: 5.25pt (use multiples of this size for pixel perfection)
A tear-off ticket design. I went for the slightly gaudy look which is associated with carnivals and arcades.
While making this I also got the idea for a font which looks like a 35mm reel with little scenes on each segment...
Original size: 14.25pt (use multiples of this value for pixel perfection)
From various games written in my ESOS engine.
When Malil Ehnetahine wishes to speak, she calls up the wind to bring her Temper Tree leaves, which form the shapes of these letters.
This font is accurate to the ingame font and is finished.
Pixel cursive, mostly on a 5x5 grid. Maybe this is the terminal font for some cybernetic old lady's computer? :D
It was possible to build every letter in 5x5, but it honestly looks far better when letters with descenders are allowed to descend a bit. This also works to increase the line spacing, which this font really needs for readability.
*
Original size: 5.25pt (use multiples of this value for pixel perfection)
I came up with an original high-res design, then brickswapped to turn everything into square bricks. The result sort of reminds me of Proxima Punch Pixel Squared, but less art deco and more computer-esque. It has a really old and naive look to it which could make it good for retro-terminal use.
"Buttons Foe" = "Obtuse Font". Not only is it an obtuse font in look and construction, it's reminescent of an era when computers were thought of as adversarial, magic voodoo boxes. So both the name and the anagram are equally applicable. :^)
Lowercase only!
This font used to be the lowercase for Spacekapitan. I cloned Spacekapitan so I could keep this, then reworked Spacekapitan into what it is now. Then I continued working on this font to make it the best it could be, and here we see the result. It has almost nothing but 90-degree angles.
This is mostly built around a 5x5 square which makes its way into most glyphs in some way or another.
I think this would make a good companion font for "Your Quota".
This is a clone of SpacekapitanVector art used for the Halftruth Lens and Deceptive Lens in the game Naively. These are pecuilar objects which impart the holder with certain visions relating to things the holder wonders about.
These lenses and the symbols' meanings are randomized each game, so the player never knows beforehand which lens is which. Below is what would be the default layout for an unseeded game...
*
A,B,C,D,E,F,G - thank you, no, yes, maybe, you're right, you're wrong, silence
H,I,J,K,L,M,N - you're right, maybe, yes, no, silence, thank you, you're wrong
O,P - you already know, it's nothing we have discussed
A font wherein the uppercase glyphs are designed to be embellished by the lowercase. Type your word or phrase in uppercase, then frame it with two adjacent lowercase letters such as a+b, d+c, e+f, k+l, etc.
I suppose this font could also be put to some cryptographic use!
kiHAVE FUN!jl
A font inspired by the use of eggplants in video games. Many video games have unexpected eggplants in them. This is FontStruct's unexpected eggplant.
I decided to fill in the lowercase to add some variety. Hit SHIFT for shiny glyphs.
*
See also: Spellforged Servitor
While walking through Glitch Forest, you spot a sudden movement behind the Sprite Trees. It's [EVIL_ANGATONIST]! With a twisted smile, s/he/it converts your words into text written in this font. ZOUNDS! How will you get through summer school now?
*
This was made to reproduce an amusing glitch found in MIDAS which caused insanely high ratings of 17.3×10^213 (17.3 septuagintillion). The glitch has since been fixed.
Just a simple font that's made to look like klaxons, blinkers, sirens, warning flashers, etc. I made this design small so that the klaxons could be placed onto other pixel art.
Perhaps I'll do a bigger version of this which animates like a rotating police siren! That would likely take 8 frames or more for each glyph, so it would be fairly arduous.
Original size: 10.5pt (use multiples of this value for pixel perfection)
This is something I've doodled on for a while. I'd like to incorporate shapes other than triangles and rectangles into this but I'm just too busy with other projects. Feel free to continue it, make it better, or whatever.
I had help from BWM for suggestions to improve a lot of the glyphs. Thanks, man!