135256916
Published: 20th April, 2009
Last edited: 4th December, 2009
Created: 17th April, 2009
I bought one of those 3D Pin Art things at a garage sale a couple weeks ago. Turns out making 3D impressions of "The Bird" doesn't hold the same cultural currency now as it did when I was in Junior High, so I decided to cash in another way and make some letters.This is a clone
7934410
Published: 27th March, 2009
Last edited: 24th June, 2009
Created: 27th March, 2009
Permutation: The act of changing the arrangement of a given number of elements.
One font, two different brick combinations.
Picking any two bricks from the 169 available gives a total possible combinations of 14196 (169C2) different fonts. Counting a certain kinds of bricks as one--all four 45degree, for instance--gives 36 unique bricks, resulting in 630 (36C2) unique combinations or fonts.
In this font, if the bricks are swapped with each other, the result will be a different font. Hence order of the bricks matter. In which case, nCr (combinations) is not the right choice. What's needed is nPr (permutations). 169P2 gives 28392 permutations and a 36P2 gives 1260 permutations.
So, at a minimum, 1260 fonts are possible with the current implementation of FontStruct, with just this particular layout of bricks.
22997928
Published: 8th March, 2009
Last edited: 24th June, 2009
Created: 7th March, 2009
Inspired by the 90ies computer game BlockOut, some sort of 3D Tetris.
16866824
Published: 10th February, 2009
Last edited: 23rd November, 2009
Created: 9th February, 2009
Loosely based on several styles of letter and numeral forms observed on various aircrafts at the Evergreen Aviation & Space Museum in McMinnville, Oregon. The museum is home of Howard Hughes Flying Boat H-4 Hercules (aka, the Spruce Goose).
Jetstream is a clone of Perforate. Jetstream's x-height is higher. The uppercase horizontals are narrower. The lowercase 'a' was made two-story. Without the constraints of the perforations, I was able to better center the crossbar of lowercase 'e', 's' and 'x'. Some numerals have also been modified.This is a clone of Perforate
491016210
Published: 4th February, 2009
Last edited: 13th September, 2009
Created: 30th January, 2009
The Factory fontstruction is dedicated to the good folks working to pass the Employment Free Choice Act (EFCA) through the 111th United States Congress. Team up!
2581515128
Published: 5th January, 2009
Last edited: 2nd February, 2009
Created: 26th December, 2008
A few pattern motifs based upon the Playtime grid and retaining (for the most part) the central block.This is a clone of Playtime Rounded Bold
5091910414
Published: 22nd December, 2008
Last edited: 26th May, 2009
Created: 22nd December, 2008
The Playtime Family. A product of being completely snowed in all weekend and spending a lot of time playing blocks and legos with the kid. Even when I'm not fontstructing I'm still playing with bricks.This is a clone of Playtime Rounded
317110311
Published: 22nd December, 2008
Last edited: 16th June, 2009
Created: 22nd December, 2008
The Playtime Family. A product of being completely snowed in all weekend and spending a lot of time playing blocks and legos with the kid. Even when I'm not fontstructing I'm still playing with bricks.This is a clone of Playtime
420610320
Published: 22nd December, 2008
Last edited: 7th February, 2009
Created: 21st December, 2008
The Playtime Family. A product of being completely snowed in all weekend and spending a lot of time playing blocks and legos with the kid. Even when I'm not fontstructing I'm still playing with bricks.
417116630
Published: 18th November, 2008
Last edited: 4th December, 2009
Created: 18th November, 2008
A mash-up of sorts. Microgramma meets Dr. Robert Moog.
12368411
Published: 4th November, 2008
Last edited: 30th June, 2023
Created: 4th November, 2008
The 'why not' version...with a guentersen style heart at the dagger.
20259811
Published: 28th October, 2008
Last edited: 19th November, 2008
Created: 28th October, 2008
This Fontstruction was produced after plugging in the Atari 2600 the other night and falling in love all over again with the minimalist simplicity of the game Breakout.
A little Jobs/Wozniak drama from the development story of the game Breakout:
"Breakout, a discrete logic (non-microprocessor) game, was conceptualized by Nolan Bushnell and Steve Bristow, after the latter had "rejoined" Atari after the merge of Atari subsidiary Kee Games.
"Al Alcorn was assigned as the project manager, and began development with Cyan Engineering in 1975. The same year, Alcorn assigned Steve Jobs to design a prototype. Jobs was offered USD$750, with an extra $100 each time a chip was eliminated from the prospected design. Jobs promised to complete a prototype within four days. Jobs noticed his friend Steve Wozniak—employee of Hewlett-Packard—was capable of producing designs with a small number of chips, and invited him to work on the hardware design with the prospect of splitting the $750 wage.
"The original deadline was met after Wozniak didn't sleep for four days straight. In the end 50 chips were removed from Jobs' original design. This equated to a $5000 USD bonus, which Jobs kept secret from Wozniak, instead only paying him $375."
284114036
Published: 28th October, 2008
Last edited: 24th June, 2009
Created: 18th October, 2008
Further exploration of the...this...style of type design. I was going to do the uppercase but then I realized that I wasn't. Go figure.
3051155346
Published: 29th September, 2008
Last edited: 22nd June, 2009
Created: 3rd August, 2008 The Slurpee Font - Created and fueled by an unhealthy summer obsession with the world's greatest beverage you can drink/eat with a straw. A little interweb research gave some hints at a few more glyphs than the initial six glyphs in the 'Slurpee' logo. In some cases, like with the 'c' glyph, I noticed that it had been drawn differently in different usage. See here and here.
Being that the current Slurpee logo is Unicase, I decided to try and make uppercase and lowercase alternatives that can be mixed and matched for the unicase feel.
See also Chank Diesel's wonderful font Cosmic, which draws from the old school Slurpee branding.
P.S. The Monster Black Ice flavor that came out this summer was ridiculously awesome.
15481268
Published: 29th September, 2008
Last edited: 24th June, 2009
Created: 29th September, 2008
Old celtic style font. Now with some diacritics and variants. Most of the vowels can have an acute over them, and many of the consonants can have dots. The dots make them be pronounced as if they were followed by an H, e.g. Th, Sh. Ë is a variant of R, Ì is a variant of S and Î is a variant of S with a dot above. Ï is the Irish symbol for "agus" or "and".
486737
Published: 23rd September, 2008
Last edited: 7th February, 2009
Created: 23rd September, 2008
Lithe is my attempt to build something modular with a hint of flair.
15719814
Published: 16th September, 2008
Last edited: 3rd November, 2008
Created: 14th September, 2008
The Chesterfield Royal Family was formed from my desire to add new weights to the original Chesterfield typeface. In the process of drawing these new weights, I began modifying some of the forms of the new glyphs away from the original Chesterfield glyphs in order to build a more flexible brick/grid structure for the development of various weights. The most noticeable difference between these three new faces and the original is the lowered x-height. That said, there are still some compromises between the different weights and because of that I've given them these royalty names instead of the normal practice of light, regular, and bold weight names. One of the biggest compromises occurs in the Prince weight, where I was unable to add the notch where bowls and shoulders meet stems (see King and Queen weights) without adding too much extra black weight to those parts of the glyph.
A work in progress for sure. Any help/thoughts/repulsions/bile appreciated.
1371988
Published: 16th September, 2008
Last edited: 3rd October, 2009
Created: 14th September, 2008
The Chesterfield Royal Family was formed from my desire to add new weights to the original Chesterfield typeface. In the process of drawing these new weights, I began modifying some of the forms of the new glyphs away from the original Chesterfield glyphs in order to build a more flexible brick/grid structure for the development of various weights. The most noticeable difference between these three new faces and the original is the lowered x-height. That said, there are still some compromises between the different weights and because of that I've given them these royalty names instead of the normal practice of light, regular, and bold weight names. One of the biggest compromises occurs in the Prince weight, where I was unable to add the notch where bowls and shoulders meet stems (see King and Queen weights) without adding too much extra black weight to those parts of the glyph.
A work in progress for sure. Any help/thoughts/repulsions/bile appreciated.