Improved version of Wim Gestreept, I reworked proportions and character balance.
Inspired bt the works of great Wim Crouwel and striped sports jerseys. Also a study in 45 degrees diagonals, happily provided by fontstructor and master Goatmeal. Basic latin support and a few ligatures.
This is a clone of Wim GestreeptAlternative a and e
See more:
https://fontstruct.com/fontstructions/show/1749711/zinople-eye-fs
https://fontstruct.com/fontstructions/show/1307297/mainz-c
https://fontstruct.com/fontstructions/show/796700/lombard_2
This is a clone of zerbeer eYe/FSTUBULAR LUMINII - Rounded inline display sans
◇◆◇ ❒ CONCEPT ■ ■
⇛▸⇛ Font that mimics electrical gas-discharge tubes (Neon)
◇◆◇ ❒ BACK STORY ■ ■
A larger potion of the Neon-fonts that are found on the web often have these quite strong emphasis on their decorative design aspects, and a lot of them come in elaborate looking complex styles and form. Besides the numerous optional different personalized conceptual decorative elements implemented into the design, many typefaces also regularly use more commonplace modifications such as; ▸multi-linear, incisions, patterned etc.
◇◆◇ ❒ THIS FONT ■ ■
Instead I went with a clean, simple basic geometric letterform, one that is essentially mono-linear at it's core. The one major key element that I have incorporated to the concept is that unmistakable in-line stroke. This was done to give it more of a convincing 'tubular'-concept as is the case with a real neon gas tube.
The other less pronounced but nonetheless fundamentally important design feature are the closed stroke-endings. Apart from being this extra little personalized element, it also suits a technical purpose. That of which is; "To fully preserve all 'in-lined'-negative (white) space in full isolation". This enables somewhat easier 'end-use' access to layer atributes or compound paths in graphic design software.
◇◆◇ ❒ FS TECHNICAL ■ ■
It's constructed mainly of connector bricks and a set of custom composite bricks, expanding FS's default connection brick set. Enabling greater viariational depth and complexity for custom shaping.
◇◆◇ ❒ FS METRICS ■ ■
❖ ❖ Metrics ⇒ 〔measure in ⇒square grid units〕
〘▸〙〔Glyph Metrics〕
○ Brick Size Filter: ~ 2 : 2
○ Cap-Height: ~ 4.5 ✕ 4.5
○ Ascent / Descent: ~ 0.5 ✕ 0.5
〘▸〙〔Font Metrics〕 ❖ ❖
○ Font Size: ~ 7.5
∗ Full Em square (incl. ⇒ symb. & punct.)
More soon..
Cheers
This is a cloneMy final entry in the competition. Inspired by Mazey, zlabyrinths eYe/FS, and wavelength. Each glyph has its own maze, and each maze connects with the next. Tilde ~ and low line _ connect words, grave ` closes beginnings and ends, and the left and right arrows < > are for the start and end. There are also some alternates in Extended Latin A. Suggestions and critiques are welcome. Thanks!
UPDATES:
04/06/14 The whole font has been updated to be one brick taller, and thus properly fit onto a grid. Also, some characters have been redesigned. V2.0
05/13/14 All punctuation has been modified to continue a word maze. V2.1
07/05/14 1000 downloads! Hooray! As a 'thank you', I've completed more of More Latin. V2.2
08/22/14 I've made the accents part of the maze. I've also changed a few characters, and added Œ and œ. V2.3
08/04/15 Added Polish support with Ą, Ć, Ę, Ł, Ń, Ś, Ź, and Ż. Tweaked a few characters as well, and added a crossbar to the ð. V2.4
06/18/16 Added support for multiple languages with more Cyrillic chars and punctuation. Also tweaked a few chars.
See more:
https://fontstruct.com/fontstructions/show/592929/squareup
https://fontstruct.com/fontstructions/show/196641/gaga_stencil
https://fontstruct.com/fontstructions/show/1501135/lazzaro-1
https://fontstruct.com/fontstructions/show/1699935/skvorec-1
https://fontstruct.com/fontstructions/show/722512/teris_4
https://fontstruct.com/fontstructions/show/559344/murus_1
https://fontstruct.com/fontstructions/show/1592394/tiles-9-3
This is a clone of De Stijl CWIP
See more:
https://fontstruct.com/fontstructions/show/1703226/ermak
https://fontstruct.com/fontstructions/show/2172409/zerena-eye-fs
This is a clone of zirakuza eYe/FSDecorative, ArtDeco-ish all uppercase font for TwentiesComp. Got carried away and added Cyrillic too ;) Enjoy!
Thanks to ETHproductions for the improved curve finish. There is a second "s" (slightly more rounded) and an alternate curvy "y" placed on the "fi" and "fl" glyphs respectively.
This is a cloneGoing for an industrial sci-fi look. The hard angles give these letters the appearance of being made by some kind of tape or roller.
This font was originally designed to be uppercase only. So, the lowercase might be considered as an alternate set.
Original size: 24pt (24pt, 48pt, etc. look most crisp when not using antialiasing)
Font made for the logo of a particular project/video game of mine.
Some kerning pairs are imperfect... I can only bring them 10 bricks closer together, so a bit of space remains...
*
Current Version: 1.9
See also:Dynablaze
At the end of October I decided to dive into the new Bricks 'Connect'. I started with the lowercase 's' & 'a'. Working out what the minimal size I could fontstruct it in, then expanded and condensed it from there to accomadate the rest of the glyths. You can still see these in the font above (Just before the Latin characters. As I progressed I came to love the thin white gaps, and then tried to have every glyth with some element of the curved white gap in it. Some were more successful than others. As you can see, I have included the less preferred options at the end. I've also designed some of the final glyphs in illustrator, as it was impossible to have all of them with one white line, without help from an external app.
The most difficult glyphs to create and ultimately the most satisfying once completed were the 'V' and '~'.
I liked the look of final font so much, that I decided to create a whole family. Cableguynium 0 (which has Zero cables), CableGuynium 2 (which has 1-2 cables per glyth), and CableGuynium 3 (Which has 3-4 cables).
Unusually I struggled naming this font, I have early versions saved called Flowonica, Rubber Tyre, Ice Skater and Fibropticon, ..... eventually settling on CableGuynium as it was the most memorable.
ANY CRITICISM, GOOD OR BAD IS WELCOMED.
DOBINI BALWAUM (Inline) — Didone-style 18th century modern serif
═══════════════════════════════════
Dobini Balwaum is a Didone, or modern, serif typefaces inspired by the works of Bodoni, Didot and Walbaum.
This font had been in the making for quite a long time as I ren into several design difficulties along the way. Most challenging parameter was the inline width. By default the width for the inline was set at 0.125 (or 1/8th) grid units.
Maintaining a constant width for the inline proved to be next to impossible. Therefor it evolves around a 'close' approximation of 0.125 units instead. Stroke weight for the letterform contours also proved to be somewhat of a constraining factor for the overall design concept. As it limits the ability to build complex geometry.
Due to the complexity in brick arrangements the font remains having some minor imperfections that I wasn't able to polish out so fat yet, and some may never will..
For now only Basic Latin letters, it remains a WIP
I hope you like it so far,
Cheers
A little experiment with the "connect" bricks (and an healty dose of stacking). I wasn't referencing any specific example of the style (of which there are many), but I'm sure that, looking for solutions as I went, I ended up with something similar to already existing typefaces (and fontstructions).
Unfortunately, some connecting bricks don't align exactly, so I had to resort to approximate them, when possible, with more stacking, which didn't particularly help the already lacking consistency in construction.
But enough moaning, enjoy!