Recreation of the pixel font from Codemasters' "Dizzy III - Fantasy World Dizzy" (1989) on the Commodore 64, Amstrad CPC, and ZX Spectrum.
The same font is used in all subsequent "Dizzy" adventure games - "Dizzy 3 and a Half - Into Magicland" (1991), "Dizzy IV - Magicland Dizzy" (1991), "Dizzy V - Spellbound Dizzy" (1991), and "Dizzy - Prince of the Yolkfolk" (1992).
Note that "Dizzy V - Spellbound Dizzy" (1991) uses the "66" style left quotation marks (U+201C) at the start of any speech, while in all other games the "Double High-Reversed-9 Quotation Mark" (U+201F) is used.
"Dizzy II - Treasure Island Dizzy" (1988) already used an early version of this font, but with fewer special characters. One major difference is the single quote/apostrophe character - compared to all later games, which use a "9" style apostrophe, "Dizzy II" used a straight diagonal small one. This has been included in this recreation, mapped to "Right Single Quotation Mark" (U+2019).
Also note that the egg character - used to indicate lives in game - is mapped to "black circle" (U+25CF).
Only the characters present in the game's tile set have been included.
Updated 06/2023: added the apostrophe from "Dizzy II", added the "66" style left quotation mark, and confirmed that this same font is used for the rest of the series, and on all other 8-bit platforms.
This font is an imitation of the PETSCII Commodore font.
I made this font out of a desperate desire to have the "commodore font" but under a liberal license, so I'm releasing it as CC0.
update: someone requested I release this under the OFL, so you can use it as that as well!
Tweet at me @josefnpat if you see any errors, or if you just want to harass me.
Please enjoy, make gaems son.
I used the wikipedia page as a reference: https://upload.wikimedia.org/wikipedia/commons/c/c4/C64_Petscii_Charts.png
IMPORTANT NOTE: THIS FONT IS NO LONGER BEING WORKED ON. I HAVE A BIGGER FONT TO WORK ON FOR THE TIME BEING.
YOU ARE FREE TO CLONE AND FINISH THIS FONT IF YOU WANT.
Finally done. Phew! It took two days to make this. This is a full collection of 5×7 Dot Matrix characters as seen on many devices, like Texas Instruments calculators. A lot of these are custom. Sources include TI-83, TI-86, TI-89, Casio Monochrome Graphing Calculators, Casio fx-115ES PLUS, and the rest, I created them myself. I included fractions for those themes on Microsoft Office don't have matching "1/3" and other fractions with the "1/4", "1/2", and "3/4". The fullwidth characters are substitutes for the other characters in the regular style, such as the math "x" and "y" from Casio.
Please note that character sets like Arabic and some Math Operators are beyond 5×7 pixels. If you want to know why? Because Arabic is very big and if I put it all in 5×7 pixels, the text will look weird, won't really fit inside, and there would be no point to it. I left it as is. Roman Numerals cannot fit if you were doing the "VIII" character, for example.
Enjoy!
8/28/2019: Font created.
1/7/2020: Added characters in the following form: Fullwidth and Halfwidth are used for making TI-73 Explorer characters, plus actual monospace setting characters. Note that Runic, Tagalog, and Hanunoo are replaced with character variants. The last variation of a character is from Minecraft's font. The fractions are also changed to level the line spacing. The wide "M" is never ever for use on Monospacing.
1/8/2020: More variations are added, extended to replace Buhid. I also added other math symbols and more. To type x̄, press unicode shortcut and type 01b2. To type ȳ, press unicode shortcut and type 01b3. I also added over a hundred, or two hundred, more characters to stock up on the font. Oh and I changed the filters to separate the pixels for a more pixel and retro look. Also fixed the spacing on the "Щ" character.
9/8/2020: Added a bunch of more characters to the font set.
8/25/2023: fixed the license so that the download works now.
Wizard of Wor. I noticed it had an interesting double-height font on the Commodore 64, where letters are combinations of a top and bottom half. I've fudged things a bit to fill the bog-standard ASCII set.
I've added the six character sprites, facing left and right. Here's how to generate them.
Burwor: Alt-0161 and Alt-0171
Garwor: Alt-0162 and Alt-0172
Thorwor: Alt-0163 and Alt-0173
Worrior (Player): Alt-0164 and Alt-0174
Worluk: Alt-0165 and Alt-0175
Wizard of Wor: Alt-0166 and Alt-0176
Recreation of the pixel font from Codemasters' "Rockstar Ate My Hamster" (1988). Slightly expanded with a few additional custom characters not present in the original game.
Edited (11/2016) to fix some of the characters, based on a more accurate source (C64 emulation of the game) and to include the "BLACK LARGE SQUARE" (U+2B1B) unicode character.
Stadium, 24-point "banner" font from GEOS on the Commodore 64. Suitable for headings. The original is upper case only, 0-9, and limited punctuation. I've made lower case identical to upper case, and added closing bars to the grave and pipe characters to achieve a couple of effects.
There was no direct TTF alternative to this one, I've been seeking it for a long time, now it's here :)
Sans Serif Version
A 8x8 monospaced Pixel Font with double-wide horizontal Pixels to fit in a C64 Koala Painter Image with only 160x200 Resolution in Multicolor Mode. You can paint a 320x200 image, draw the text on it and convert it to C64 Koala Format using Project One without distortions (hint: use font size 8px and Height: 85% in Photoshop).
It was very hard to make the chars with so few pixels that some characters didn't make sense to create. The font fits perfectly in the 8x8 color matrix of the C64, too.
This is a clone of C64 Multicolor MonoThis magical typeface was lovingly hand-cloned from the Commodore 64's construction platformer "Ultimate Wizard", using the game's exact sizing and spacing. I've added square brackets and a backslash, which are not actually present in the game.
A 8x8 monospaced Pixel Font with double-wide horizontal Pixels to fit in a C64 Koala Painter Image with only 160x200 Resolution in Multicolor Mode. You can paint a 320x200 image, draw the text on it and convert it to C64 Koala Format using Project One without distortions (hint: use font size 8px and Height: 85% in Photoshop).
It was very hard to make the chars with so few pixels that some characters didn't make sense to create. The font fits perfectly in the 8x8 color matrix of the C64, too.
Wizard, platform game for the Commodore 64. This font replicates its pixelled medieval character set at its usual size. After first doing a monospaced version, cloned it to make a proportional font and have tried to set reasonable kerning of character pairs. Some redefined characters in the game also appear here...
This is a cloneUridium by Andrew Braybrook for the Commodore 64 (and various other platforms). I've managed to interpret the graphic tiles to reproduce the letter set from the title screen, HUD, high scores etc. as a font. I thought the capitals were too wide but was my imagination (and the screen grab I took of the charset!).
Have done some cool interpretations of punctuation... and a few glyphs for you:
` for Colour
~ for Black & White
^ for Player
| for Joystick
} for Ship Remaining
{ for mystery... try it and see!
I am proud to present FontKnox, one of the more popular fonts in GEOS on the Commodore 64. I took a bit longer with this one but it was well worth it. The font is meant to look kind of embossed and metallic, hence its original name.
As it's decorative, I've included only its original characters; I've used the bottom of the semicolon to make quotation marks.
Lewis from GEOS FontPack PLUS for the Commodore 64.
Another Old West font... normally I don't care much for them, I never warmed to Playbill. Lewis feels like it's got a bit more space - almost a cross between Playbill and Italian Print.