Searching for more “Serif” fonts?
Buy and download “Serif” fonts at MyFonts.
DOBINI BALWAUM (Inline) — Didone-style 18th century modern serif
═══════════════════════════════════
Dobini Balwaum is a Didone, or modern, serif typefaces inspired by the works of Bodoni, Didot and Walbaum.
This font had been in the making for quite a long time as I ren into several design difficulties along the way. Most challenging parameter was the inline width. By default the width for the inline was set at 0.125 (or 1/8th) grid units.
Maintaining a constant width for the inline proved to be next to impossible. Therefor it evolves around a 'close' approximation of 0.125 units instead. Stroke weight for the letterform contours also proved to be somewhat of a constraining factor for the overall design concept. As it limits the ability to build complex geometry.
Due to the complexity in brick arrangements the font remains having some minor imperfections that I wasn't able to polish out so fat yet, and some may never will..
For now only Basic Latin letters, it remains a WIP
I hope you like it so far,
Cheers
LUCERNA — Neoclassical stencil serif
════════════════════════════════════
Lucerna is a modern neoclassical stencil serif in the Didot style.
Simple & Elegant...
════════════════════════════════════
Created primarily with the focus towards luxury fashion and marketing brand-oriented projects, aiming at luxurious and sophisticated design projects.
Although it’s a true and fully functional stencil, design focus wasn’t so much
concentrated around the 'functionality' part of the stencil concept. Instead it was more focussed on the stylish implementation of the concept and on making sure it looks pretty.
The stencil concept was achieved by way of stroke omissions. Some of which are large and drastic, leaving only critical parts of the stroke intact, while others are more subtle, like those detached crossbars or cuts seen in the hairlines.
Thin transitional bracketed serifs and a mixture of various sized teardrop- and pointy terminals, combined with the high stroke contrast, these make up for a sharp and interesting looking font that provokes this thoughtful stencil letter concept.
There is a lot of subtle dynamic height deviations going on, hoping to tune in to more of a lively rhythm, and introduce some playful characteristic properties.
Minute changes to optimize optical performance have also been implemented, such as overshoots. The relative low cap-height makes up for a somewhat short and stocky uppercase quality. Its accompanied by a relatively tall x-height that results in a fairly large lowercase size. Due to the lower cap-height of the font, the short ascenders parts of the lowercase letters still exceed above the Cap-Line, preserving some of that otherwise lost white space, improving legibility.
The design's missing segments and various random detached bits 'n pieces aren't as functional in smaller sizes. Making it harder to read or distinguish detached letter elements from puntuation marks. So it is best used for display purpose.
════════════════════════════════════
A small number of glyph alternative forms are included as well:
• 2 forms of lowercase letter a:Single-storey and double-storey (default).
• 2 forms of upper- and lowercase letters Ss:Pointy terminals (default) and teardrop terminals.
• 2 forms of upper- and lowercase letter Tt: Uppercase letter T has two variations of pointy terminals, normal angled and extra angular. Lowercase letter t has alternative form with teardrop shaped terminal to use at the end of words, and can add a slightly more stylish look. The default version has better proportional width with just a small non-decorative curved terminal, this default form has smaller width for a improved horizontal text advance.
• 4 forms for lowercase letter g:Just 3 additional extra slightly alternate forms.
• 5 forms for lowercase letter f:Bracketed (default), curved, teardrop narrow, teardrop extra narrow, teardrop wide.
• Extra set of Copyright symbols:Cap-height size and x-height size.
• 5 forms of Pilcrow symbols:Just 4 additional extra alternate forms.
════════════════════════════════════
It covers most basic Latin languages, 65 in total so far.
Several symbols and punctuation marks are included. (probably more later)
I hope you like it so far,
Cheers
This is a cloneUNION WEST (Display) ― Classic Wood Type inspired slab serif
═══════════════════════════════════
This is the 'Display'(bold weight) version for the "Union West" typeface family
═══════════════════════════════════
[About the "Union West" typeface]
The idea was to craft a typeface that resembles a vintage wood block lettering style. The design is a sturdy looking geometric form with small wedged slab serifs, straight beak terminals. It comes with two weight versions, 'Display' and 'Text'. The Display version is a bold style that has medium weight contrast and aims for headline use, the Text version is a thin style with only mild weight contrast that is heavily condensed and aims for body copy use.
═══════════════════════════════════
➥ More characters will be added within the following days.
═══════════════════════════════════
The other font in this family is found here:
UNION WEST (Text)
I hope you like it so far, let me know what you think
Cheers
MODERN TYPEWRITER - Typewriter style Slab-Serif
============================================
The idea was do a simple, clean and solid looking design that mimics the looks of a classic typewriter style typeface used for form fill writing style.
The rectangular shaped concept was carefully chosen to provide this nice mechanical looking forms, and to further enhance the technical style concept of this design.
REWINDER - A bold and decorative "I don't have a clue" style font.
Alternative lowercase versions for (a, c, e, g, j, m, n, o, q, s, u, v, w, y, z)
=============================================
Usually I design fonts from a general concept I have in mind and start with the Latin alphabet first since I am most familiar with these characters. Then when I have completed these I start adding extra language support. letting everything evolve from there on out into the other languages such as Cyrillic or Greek. Doing it in this fashion I find myself having the best change of doing a decent job designing characters I am not familiar with the right way and in line with the design parameters.
This time I starten designing the Cyrillic alphabet first, trying not to think about the Latin set design at all. I did this in an attempt to have a neutral mindset that wasn't influenced in doing it a certain way.
And I must admit, this was the best and most comfi time I ever did a Cyrillic set. I experienced a sense of having a lot more freedom for creative output.
The result became this cool looking "hell knows" what kind of style letterforms. I have no clue if I actually did a decent and accurate job at the Cyrillic set, and I'm not sure where to go from here on out either.
I hope you like it so far
Cheers
STF_SKYR SLAB - A modern slab serif design.
First of all, Hi everyone,
I hope you all doing great...
Seems that for now I have found my way back here, after being away from Fontstruct for nearly 2 years.
I got to admit that I experienced some ring rust at first. lol
Anyway, here is my latest fontstruction, the first one in 2 years.
So far the main design concept and the basic minimum glyph set is about completed, and I am pretty pleased with the result up untill this point.
More technical details on the design and concept as well as demo gfx can be found down in the comment section.
I hope you like it too so far
Cheers
Emil has a sympatic character, even if he has his little edges and corners. Nevertheless, Emil is not too eccentric. It' s possible to work with him and maybe Emil will go one step further towards italics...?
This is a military-style stencil font inspired by the original Stencil-Gothic face (by John West c. 1885), Ironmonger (by John Downer, 1991-93), and Pediker (by Kazimir Samoscanec, 2013). The latter one is a revival of a stencil face of unknown origin. Sorry for the dystopian future. I hope it will never happen.
All cap bold serif
kerned : Russian, Latin Basic, More Latin
I can't even type cyrillic extended, there are too many letters in latin extended, I don't have greek keyboard either
I wish I could make everything, but I'm a human after all (or am I?), I decided that this is good enough
Version 0.5
*
A font made for a LuneKnight, a Terraria mod by yours truly. It gets its name because parts of it remind me of halberd, partisan, and/or axe heads. I designed this to have the vaguely authoritation look of a Didone as well as a borderline-gaudy look that prevents this from being taken too seriously. These changes lent some much-needed character to the prototypical Didone from which this design evolved. The uppercase letters are more heavily ornamented, as if to suggest that they are letters from an illuminated manuscript.
The main texture is a diamond pattern inspired by vent holes in medieval armor. These were often made with a square punch, and help the font look more handmade. Actually, most of the quirks this font possesses are present to help present a handmade look.
*
Notes
The wider letters are incised, which seems to lessen their perceived wideness by breaking up the shapes. For me this effect lent a more natural flow to the reading.
The ornamentation rules are complicated and factor in lettershapes, English letter frequency, and the existing design parameters. One thing I can concisely explain is that glyphs which normally look fairly plain are ornamented to such an extent that they make others look plain instead (CGJLT1 among others).
STF_BODIDONE - Classic Didone style display serif.
Ahh sadly due to repeatedly running into a corrupted font when I save newly made changes to it, it eventually catched up with me and tested the limit of my patience.
I have had to painstakingly restore the font 5 times already since I started it.
So I stopped including new characters as well as making new changes to its existing character set. (At least for now)
Too bad because I wouldve loved to see this truly getting finalized.
So at this stage there are still a number of characters that remain in rough condition, and had yet to be further optimized.
The main A-Z alphabet luckily already was close to how I invisioned it, but especially the numerals, symbols and accents still have some rough edges.
Now, forgetting all that, I still think it is not a bad font at all. Everything is there for most common Western-European languages, somewhat still making this a usable font that I shouldn't be keeping in private!
I hope that despite my bad luck this time, y'all still like it.
================================================
About this Font:
The idea was to make a classic Didone style display serif that is meant for making clean headline text similar to those often seen in older magazines or newspapers. I set out trying to design a semi-bold & slight expanded looking letterform with thin hairline serifs and strokes. I choose a large grid scale for the extra freedom in custom shaping this provides.
================================================
Technique I used in this design:
This font in particular I have experimented with working within a "(asymmetrical-) Grid Scale ratio" ( 1,5:1 ), so, changing only the value for the Horizontal grid scale. (This distorts the grid aspect ratio, and is a great way to discover and experiment with getting new forms and shapes).
The 1,5 : 1 ratio was specifically choosen to keep maths simple, in order to rebuild certain required bricks that build specific slope angles , such as a 45° (which is no longer possible to make from the FS default brick set when using asymmetric scale ratios, unless making composites).
But what this also does is opening up a totally new approach to making shapes, and..becoming quite a surprisingly easy shortcut to get unusual shapes or make variations on these, even with as little as just the rotation of the bricks/selection. (thanks to the distorted aspect ratio) :-).
This is a must try for those who are into large grid designs, fake curves or interrested in experimenting around a little.
Enjoy!
DIDUDE (Condensed) ― Contemporary Neo-classical "Didone" style serif
════════════════════════════════════
The idea revolved around the basic concept for 'Didone'-style typefaces.
A genre characterized by modern unornamented standard letterforms, which was very popular for general-purpose printing during the 19th century. DIDUDE is by no means an attempt to embarge on a quest trying to deliver a conceptual overhaul of this genre. Its main goal was to achieve greater simplicity, without sacrificing that traditional neo-classical personality. Instead of leaning towards the typically more 'Humanist'-influenced style with distinct stroke modulations and proportional forms, geometry and symmetry were introduced to design this more simplified take on the traditional historical style. It has been crafted with a structural logic of its own.
"Less human, more geometry.."A fusion of geometry and neo-classical elements that blends the past with the present.
━━━━━━━━━━━━━━━━━━━━━━━━━━
Main distinctive features for DIDUDE (Condensed) are:
Tall and narrow letterforms with short unbracketed serifs, vertical orientation of weight axes with a strong contrast between thick and thin strokes, slightly squarish-shaped round characters and its emphasized business-like nature. So the majority of important characteristics that distinguish the neo-classical style have been incorporated.
Certain features that were implemented into DIDUDE's design are somewhat setting it apart from most other, more traditional typefaces in this genre, and most notable is the more relaxed contrast ratio that was choosen for this particular project.
Further personalizing touches were made to stroke endings and curve geometry, providing slight 'calligraphy'-inspired decorative variation with occasional spurs, breaks, curved finials and plain monolinear terminals.
Topping it all off with an ever so gentle height deviation that sparks a subtle rhythm to any line of text. Last but not least, most of the optical clunkiness was addressed and either corrected or compensated.
There is a large character set that includes a little bit of everything:
Basic latin character set, latin-1 supplement set, stylistic ligatures and glyph alternatives, punctuation marks, lining and non-lining text figures, roman numerals, (Partial) Greek and Cyrillic, also numerous non-lingual technical, mathematical and decorative stuff was included.
Only partially kerning for now and this remains a WIP.
Nonetheless, I hope y'all like it so far..
━━━━━━━━━━━━━━━━━━━━━━━━━━
Here is a link to the other font style in this typeface family:
STF DIDUDE (Regular)
Cheers
American frontier and western inspired display type.
Still needs a little bit of tweaking here and there. Also for some reason leading is not what it supose to be, it runs short a bit. But this is far from problematic.
Enjoy!
My first fonstruction is based around the theme of malnutrition, but focuses on lesser acknowledged end of the spectrum, over-nutrition. I took inspiration from nature of skin and fat on overweight or obese bodies, putting emphasis on the folds and bulges you might typically see on the skin of a larger frame.