Searching for more “Decorative” fonts?
Buy and download “Decorative” fonts at MyFonts.
STF_THUNDERDOME - A tall thin stroked Art Deco typeface.
I tried to create pretty simple, elegant but somewhat wonky geometric letterforms.
Inspired by the later 70's Art Deco Streamline period.
--------------------------------------------------------
This remains a WIP, many of the glyphs in the Extended-Latin set aren't reflecting their Basic-Latin counter-parts. The character set remains far from complete for now, and many changes need to be made still.
Kerning done only for a few pairs and overall balance therefor is still quite poor I guess.
Some 'more' detailed but derailed towards the end 'in-depth' recap of this font could be found bellow in the comment section.
Stay tuned for more,
Peace!
This is a cloneInspired by the Logo of The band Scorpions first created back in 1975.
All other letters were built based on the letters in the original logo by me.
I found the original font of the logo, called "Lady Starlight" (you can check it out here:https://www.dafont.com/lady-starlight.font?text=SCORPIONS) quite boring and thus made this like a recreation. Hope you find it much more interesting.
HeavyComp entry number 1
Enjoy!
Open to comments and suggestions
Hello again! Here's someting I started dabbling with years ago, but never finished or published. Fontstruct bricks and functions have evolved since then so I decided to give the ‘font’ a facelift and make it a little more complete (still no plethora of glyphs but I'm ok with it for now). Circus wild west meets casino and slot machines. Gambling, gunpowder, acrobats and jesters. Wash down with tequila.
When my mother was young (and specially after my birth) she supplemented the family's income from home by typing for students and businesses. When I was a student I used the same machine for my assignments, lesson plans and thesis. The years were not kind to the machine, the mechanics rusted or broke, the letters worn with frayed edges or disintegrating serifs and fine lines. Ruth's typewriter is a declaration of my appreciation of many years of service the brave little machine gave... As you can see I clearly didn't get the letters repaired ;) The font looks like I rearranged and glued down what was left of the raised surfaces, to continue using the typewriter and give my words a very modern look ;)) A "grunge-writer" ?? Did you notice that no typewriters were ever sold with this kind of modern destructured typefaces?! ;)
Since I started this font many years ago (Ruth was very amused and appreciated this hommage) this work has now become a memorial to her
Decorative, ArtDeco-ish all uppercase font for TwentiesComp. Got carried away and added Cyrillic too ;) Enjoy!
Emil has a sympatic character, even if he has his little edges and corners. Nevertheless, Emil is not too eccentric. It' s possible to work with him and maybe Emil will go one step further towards italics...?
CLICK ON THE “PIXEL” BUTTON TO MAKE IT LOOK, LIKE, A BAJILLION TIMES BETTER.
INTENDED LANGUAGE SUPPORT
• ENGLISH
• MĀORI
• SLOVENIAN
• RUSSIAN
THINGS THAT FONTSTRUCT NEEDS
• A DITHERING TOOL
• AN ELLIPSE TOOL
• RECTANGULAR- AND ELLIPTICAL-OUTLINE TOOLS.
• A BUCKET FILL TOOL
• RULERS
• A SKEWABLE GRID
• A MASS KERNING FEATURE (OR EVEN AUTOMATIC KERNING, THAT’D BE NICE)
• SUPPORT FOR MULTIPLE FAMILIES WITHIN ONE FILE
• A TERMINAL FOR PROGRAMMING ALGORITHMS TO AUTOMATE REPETITIVE, PREDICTABLE ASPECTS, AND A WAY TO REFERENCE THE GRID SQUARES AS AN ARRAY OF SOME KIND
DON’T THINK THAT I’M SHOUTING ABOUT THIS. I JUST DON’T LIKE LOWER-CASE LETTERS!
This is a clone of Some fonts you just can’t FontStructIsometric 3D outline style typeface.
The glyph have a exact copy slighly elevated and to the right of its original which I then connected with eachother to create the box-like three-dimensional idea.
Because of some serious design difficulties it remains far from complete, but I am kind of done with it for now due to this. For now only support for uppercase, no numerals and very limited punctuations. I think I fully kerned it, or at least everything that is important. On last thing I need to mention, the smallest open spaces doesn't allow this font to work in very small size. These will look filled at smaller point size.
I'm not sure if I will ever try another attempt to finish it at a later stage. (who will tell..) ;)
But I think what I've got so far is too cool for not publishing it. So for now it would do just fine as a logotype or for a decorative usage but not much else.
Enjoy!
This is a cloneMy first fonstruction is based around the theme of malnutrition, but focuses on lesser acknowledged end of the spectrum, over-nutrition. I took inspiration from nature of skin and fat on overweight or obese bodies, putting emphasis on the folds and bulges you might typically see on the skin of a larger frame.
A decorative insular display font.
This is still a work in progress. I'm pushing the new bricks, stacking and nudging to the limit to create some nice flowing shapes. This is also a great opportunity to get working with some good kerning. Once I have the basic character set, this is going to be submitted to Google Fonts for approval.
A funky idea that started with the A and expanded from there. Most letters are drawn by a single line winding around, although some are just not willing to follow this mantra. I found this half-finished while scrolling through my private FontStructions, looking for ideas for the CounterComp, and decided it was already an interesting entry :-)
There's an alternate, narrow set of numbers that can be reached with Shift+number (on a QWERTY, Dvorak, etc. layout); not sure which set fits the style better. Suggestions and critiques welcome for anything, and feel free to clone and poke around with it. Thanks and enjoy!
A piece of constructivism inspired by Dutch artistic movement "De Stijl".
This is a clone of STF_FABRICON_(OUTLINE)Decorative or Cyrcus font? Just a simple font with Cyrillic. Track changes (short slider) for connecting letters. Bala is the first part of the word balalaika and Balagan, an early Russian cyrcus or an open-air theater (https://ru.wikipedia.org/wiki/%D0%91%D0%B0%D0%BB%D0%B0%D0% B3% D0% B0% D0% BD)
See more: zylone 0,6 EYE / FS
http://www.psyops.com/crucible/
https://fontstruct.com/fontstructions/show/479802/effigy
TSA
@This is an extended version of Ostara Aria and more elaborate than the "Kerbe" designs. I changed the look of the LC and adjusted some of the UC.
Now the UC lace is better structured and distributed; glyphs A,N,M,U,V,X,Yand their LC, and @,7 and quotation marks have changed shape slightly; missing glyphs on the More Latin set (and the entire ExtendedLatin1 for my family, friends and aquaintances across Europe) needed quite some work due to the ornate sections - I hadn't planned on making this many glyphs, the ornate look was just intended for display UC of English, German and French and not for any other glyphs. Getting diacritics to look good with the decorated UC glyphs was a challenge but I think the ones I've decided to use don't overdo the ornateness nor distract from the glyph's shape.
Due to the new glyphs and diacritics I should have added 1 pixel height to accommodate the decorative lace element more obviously. Instead I changed some shape-rules ever so slightly to have an easier time adding the lace brick.
The LC is now solid black; diacritics have some added lace to integrate better in the design. The LC gives a separate font which might be of interest for headlines, advertising, on signs, cut to sew on fabric etc.
.
.
Note that there are still some adjustments/spacing needed; the kerning isn't finished yet either. I'm publishing this to get constructive comments -- and praise ;)
[youmoor]I plead for an algorythm that allows one strange/incomplete comment or (psychosocial) pinaillage for every 1 or 2 sincere (++explained) praises :D Applicable not every minute of the year you understand, only from GMT 0:001h Mondays to GMT 23:599h Sundays [/yoomoor].
The font's name is Malagache.
CAPITAL LETTERS HAVE A WHITE STRIKETHROUGH. LOWERCASE LETTERS ARE COMPLETE.
TO GET THE PARALLAX LOGO (MY WEBSITE), TYPE “%.”
ALSO SEE THE TWO-DIMENSIONAL VERSION OF THIS FONT, “PARADOXICAL-VORTEX-FLATTENED.”
CHANGELOG
• 2017:11:30 — PUT THE STRIKETHROUGH ON THE CAPITAL ACCENTED CHARACTERS. ALSO FIXED A SPACING ERROR WITH THE “$” SYMBOL.
• 2017:12:01 — DUE TO POPULAR DEMAND, I HAVE ADDED A HUNDRED AND FIFTY NEW AND ACCENTED CHARACTERS.
• 2017:12:02 — ADDED EIGHTY-SIX MORE CHARACTERS, BRINGING THE TOTAL AMOUNT OF CHARACTERS TO THREE HUNDRED AND FORTY-ONE. ALSO UPDATED THE “¥” SYMBOL AND THE SINGLE ACCENTS.
I created this typeface around the theme of gregarious, focusing on gregarious plants. I started with drawing the letterforms in ink using a rolled up leaf. The results were twig-like marks which reminded me of the illustrations from 'A Monster Calls' so I developed the letters thinking how they could work alongside this or another story. The name 'This Wild Earth' is taken from the book and I think reflects the scratchy and bold feel of the typeface.
In this typeface, I have explored the idea of order and systematic design in an urban surrounding. Following the natural lines from the cement of a regular brick wall I have used the repetitive pattern and method to mark the outline to my type face. This font is primarily created for using in titles and headings rather than in a body of text as it is more impacting as well as visually striking and eye catching.
I've returned too late to make a special font for the Reversecomp. I already had changed some aspects of the "Lord Calendulos" version of Calendula set in the clone taken and finished this Lady version today. As my competition entry I flipped the Lady Calendula glyphs horizontally. This means my reversecomp entry font "Calendula Lady" can be used like a plane shadow when placed under Lady Calendula.
This is a clone of Lady CalendulaReverse in the visual context can mean many things. I decided to create letters and mirrored them, attaching them to a spine.The letters looked like filigree jewellery pendants.
I know that the I , T and W don't follow the design rule; I tried to align them on a spine but the result was unsatisfactory.
This is a cloneInspired by a lace edged table cloth. Good for a word of greeting on a card for Easter (or Ostara, but you're a day late ;) so you best grab it for next year... ) It would be great to use on cards, labels, book bindings, for someone doing needlework, crochet, knitting, tatting, macramé, sewing, stencil work and similar paper or thread based crafts.
This is a clone of Kerbe2A typeface inspired by American typefaces from the 1800s and the Art Deco-styled coffee shop I visit often in Des Moines, Iowa.
Combining a slab-serif, expanded typeface with ornate detailing brought challenging consideration to the legibility of the font. It’s used best for short, bold messages or an energetic initial cap.
Another font in the "First of the Month" series.
Based on a shape experiment with octagons this design has grown into a 'real' font fit for headlines and messages to suit October and Hallows Eve/Halloween/Samhein. I'll add MoreLatin diacritics if you need them. It would look good on cards for Halloween.
As part of my "First of month ..." series here is an outline font for July, ready to fill with juicy summer fruit and (ice) cream :)
Alternative letters with diacritics (free floating instead of attached, easier to read but less fun to look at;) ) are on the LC for French and German texts. An alternative 'S' which doesn't quite follow the construction rules but might be of interest, is on the LC 's'.