A cursive font that was a delightful challenge, please enjoy

I decided to make a design which incorporated the thinnest/lightest weight lines possible in FontStruct. This is the result; I'll add more if people like it.

These 1/32 lines cannot be accurately nudged, so a unique line has to be built for each vertical position where I want a line. These lines also cannot be centered on a place where two curves meet (such as the middle of B or R). This introduces some unintentional asymmetry to the design, but I like it, so I'll keep it.

There is also the problem that forming a diagonal line of the same line weight is nearly impossible. While angled 1/32 lines can be formed, their angles are all close to 0. No method exists for making a line which slants at 45 degrees while also being 1/32 weight. So, I had to make some thicker lines in certain areas. I don't think they detract from the design, but if you scrutinize this enough, you'll notice them.

Inspired by a type identification request over at Typography.guru.

During developement, the tool has taken over, also helped by the scarcity of letters available in the original, making the design more sans than serif, and with strong MICR vibes in some places.

The name means "shoe shop" (also shoe repair or shoe making) in Italian.

At the moment the language coverage is limited to Western Europe.

A pixel font which combines four experimental techniques at once:

1. Structurally disconnecting the stems from the open parts of letters.

2. Allowing glyphs to extend beyond their normal reaches.

3. Designing glyphs specifically to connect and form new shapes, rather than simply allowing shapes to emerge from existing characteristics.

4. Designing glyphs so that the overall font is free of a need for kerning.

*

Alternates are now on UPPER CASE. I'll continue to update this as I get more ideas!

*

Original size: 6.75pt (use multiples of this value for pixel perfection)

A slightly leafy engraving-style Decolike.

"thank god theres a copy and paste function"

----------------------------------------------------------------

i thought an isometrical font would be nice so i made one

wow i like 3d fonts huh

Gothic semi-serif grotesk geometric design

Bauhaus inspired geometric design.

I know there is tons of out there already, still I had to do one myself!

It's far from perfect, but it was made on a very tiny grid space, so a whole lot of space to occupy with bricks wasn't a luxury this one!  (I'll demonstrate a example below)

Still I think it looks pretty rad so far!

I saw a old poster on the internet and this is a remake of the font it used.

By request, a condensed and quirky outline font!

*

Original size: 7.5pt (use multiples of this size for pixel perfection)

Version 1.3: Added Polish.

*

This font used to be a normal Decolike... until someone decided to chow down on it! They seemed to prefer the taste of spurs, as all of them have been bitten off, leaving only semicircular impressions.

"Nervousa" is an anagram for "Ravenous".

A variant of Marrada with more angles.

Usually with designs I try to make every part look like it "belongs" with the others as opposed to trying to make each part look its best. With Marrada, I struck a balance between the two. Q1@*&{} are probably the best examples of this sort of balance...

This was a simple idea started from S and T. Most of the glyphs have two verticle strokes that are 4-bricke-wide and a 1-brick-wide area in the middle of the character. except I, L, S and T (actually a lot more). They are a bit different. Especially S, T and L. The whole characters are only 8 bricks wide. As I mentioned above, It's because the whole font started from these characters.

Straka the name came from last name of a person. The S and T reminds me of this person's last name. I like this last name although I don't even know him.

About the Latin extension, I have made only the glyphs that require no new design, just diacritics and already made letters. So I can pretend like hard-working on fonts but copy paste in reality. :P

Also, I made Arabic glyphs. Only isolated forms. Which I suppose won't be a comfortable experience to Arabic users. It's like every letter has crazy swashes but every letters are lightyears away from each other.(or is it?)

Credit me bcuz it took days and I gave it all to you for free. Unthankful hairless ape. :p

has it gone 2 far? hope it didn't hurt you.

A sort of deco inspired science fiction-esque font, please enjoy

Version 1.3: Added Polish.

*

Another asymmetrical sans-serif made for use in rulebooks for the Freeform Limitless Adventure Kit (FLAK) pen-and-paper game system. This one is classed as a hybrid and works well at all point sizes!

It began as a Constant Height design, but now I don't classify it as such since most of the letters with diacritics are taller than those without. A few letters (eszett, thorn, eta, etc.) are allowed to descend slightly, as well.

This font has also found some use on signage at a friend's bistro!

A more bookish take on Comicool, made for more comfortable general reading. It's still useful for comics, as well!

Many letters were squared off in the corners, lowercase letters were given stems, and an assortment of glyphs were edited for more style.

This is the third iteration of Comicool... rather than develop them all toward one style, I tried to make each iteration the best it could be. The result is three distinct, but still compatible styles. This one is probably the best for body text!

I tried to make a font that mimics the minimalist design patterns of the late-90s and early-00s, as well as earlier grid-based works like those of Wim Crouwel. This is the fruit of that labour.

A semibold Gongclonker made to the same specs as the original - 5x5 with no wasted matrix.

A sci-fi font crafted while at the Pohang train station in Korea. Please enjoy

AZUL is BLUE in Spanish. I choose the word blue because it always reminds me of ultra bold fonts. But i feel like just "BLUE" looks dumb so i choose "AZUL" instead. Btw blue in Chinese is "lan". Just imagine "LAN" as it's name lol.

Least important stuff :

I got this idea when i was thinking about if I design a poster for a JoJo character. it'd be Kira Yoshikage. And I was like "Gotta need a ULTRA bold font to show he's really danger" Now you know this totally unuseful thing :P

A little more important stuff : 

This font is free for all use.

DO NOT PRESS THE B SYMBOL WHEN YOU USE THIS FONT. SERIOUSLY, DO NOT

lqi laugh quietly inside 

A simple multiline design

Some kind of great big ol' chain.

In retrospect, I think it looks like a jewelry chain from a dwarven civilization. Perhaps the hypothetical jeweler cut and ground the stones in an imitation of some dwarven font!

When glyphs are used in isolation, they somewhat resemble carved signets or seals. Increasing the letter spacing allows you to create a variation of the design. (This is something that must be done in-software since the font will render as monospaced by default.)

*

12SEP2018: Added lowercase... the low resolution combined with the design method make it very difficult to render distinctive lowercase versions of every letter, but I'll keep working on it. There's a lot of similarity between pairs like S/5, Z/2, etc., so this font is most effectively used in forms of writing wherein context suffices to inform the reader as to the identity of each glyph (lists, prose, and technical writings). If you want to use this in a password system or something, I recommend using one case's glyphs only.

*

Design Rules:

1. Negative spaces will be areas of 0.5 bricks' effective length or width.

2. Negative spaces may exceed the 0.5 measurement only by increments of 0.5 and in only one dimension at a time.

3. Glyphs will fill their framed canvasses to the greatest extent possible while adhering to the other rules.

Alternate take on Nirvanite, this time with bullseyes rather than solid circles as the large segments.

This one is a lot more organic than its predecessor, but also a lot more confusing. Looks like clusters of alien tadpole eggs to me!

Experimental 24-segment display or massive monochrome Mondrian matrix. Pixel compatible!

The thinking behind this one was that with incongruously sized segments arranged in the proper way, I would create a design which was effectively 5x5, but which accomodated more glyphs than 5x5 usually does. Negative space is incorporated into the structure of many glyphs, though not enough to classify this as an IVO design.

"Qualtron" is the name of an imaginary entity that a friend believed in - a being meant to represent the result of "a mathematical equation that can rule the universe". I didn't inquire further about it... :D

*

Design Rules:

1. Segments can have interior length/width of 2 or 5.

2. The central 2x2 square must always remain open.

3. Square bricks and 90-degree angles only.

*

Original size: 20.75pt (use multiples of this value for pixel perfection)

A 117-segment display made to have a more "mosaic" look. Try using this one at odd sizes, especially with antialiasing off! The resulting distortions occur in a consistent way which leads to many new uses for the font.

Original size: 38pt

A decorative insular display font.

This is still a work in progress. I'm pushing the new bricks, stacking and nudging to the limit to create some nice flowing shapes. This is also a great opportunity to get working with some good kerning. Once I have the basic character set, this is going to be submitted to Google Fonts for approval.

A serif font with a couple of nice little touches to it. My original idea was to attempt to make a Donburi Serif, but about three glyphs in turned into its own thing.

This is a rendition of one of A. V. Hershey's dot fonts from his 1967 paper "Calligraphy for Computers", the "Cartographic" (sans-serif) font, plus a number of glyphs imported from the "Mathematical" font, as well as many additional glyphs drawn in the same/similar style to the original glyphs. This font actually dates to at least as early as June 1963, as it is featured on some diagrams in Hershey's "The Plotting of Maps on a CRT Printer" paper.

Bold super italic 45º!

A multi-line design which is slightly reminescent of mazes/fingerprints. It's not designed to create functional mazes, but it is somewhat capable!

"Absinthelyric Print" is an anagram for "Labyrinthine Script".

*

Original size: 11.25pt. Use multiples of this value for pixel perfection. (If you use antialiasing, it will look perfect at most any size.)

*

Design rules:

1. Square bricks and 90-degree angles only.

2. Alphabetic glyphs must have open terminals; numerals and symbols must have closed terminals. Letters which do not terminate (D,O, etc.) must be broken so that they terminate.

3. Glyphs must fill the 15x15 grid.

4. Ligatures and combinatorial glyphs must fit into one letter's space.

5. Draw from the outside in.