This is another clone of Monkey (my monospace lanky font); it should be very similar to the original except for the lower x-height and the added accented characters (More Latin/Latin-1, Latin Extended A, Latin Extended B, and now Even More Latin/Latin Extended Additional). It is 16 blocks tall and 6 blocks wide; all letters without diacritics are at most 9 above the baseline and at most 3 below, but the accents push the height of a letter up by 3 blocks (or rarely 4), and the box drawing characters extend even higher, to 16 blocks from descender to the highest point. This font uses the FontStruct 2x2 filter method with plenty of composite and stacked bricks, which lets the curves look good at large sizes while remaining sharp on the screen at normal sizes. Mandrill will look strange in the FontStruct preview if you zoom in or out, but if you download it, it will look sharp at size 16 or 12 (depending on the program).
This is a clone of MonkeyAlternate take on Nirvanite, this time with bullseyes rather than solid circles as the large segments.
This one is a lot more organic than its predecessor, but also a lot more confusing. Looks like clusters of alien tadpole eggs to me!
This is a clone of NirvaniteVersion 1.3: Added Polish.
* $ * £ * ¢ * ¥ * $ * £ * ¢ * ¥ * $ * £ * ¢ * ¥ * $ * £ * ¢ * ¥ * $ * £ * ¢ * ¥
Another simple experiment with composites, this time trying to make a font which can easily accomplish a "diamond encrusted" or "disco floor" style effect within my graphics software.
SPOILER: I succeeded. :D
* $ * £ * ¢ * ¥ * $ * £ * ¢ * ¥ * $ * £ * ¢ * ¥ * $ * £ * ¢ * ¥ * $ * £ * ¢ * ¥
This is a cloneFont made for the logo of a particular project/video game of mine.
Some kerning pairs are imperfect... I can only bring them 10 bricks closer together, so a bit of space remains...
*
Current Version: 1.9
See also:Dynablaze
A multi-line design which is slightly reminescent of mazes/fingerprints. It's not designed to create functional mazes, but it is somewhat capable!
"Absinthelyric Print" is an anagram for "Labyrinthine Script".
*
Original size: 11.25pt. Use multiples of this value for pixel perfection. (If you use antialiasing, it will look perfect at most any size.)
*
Design rules:
1. Square bricks and 90-degree angles only.
2. Alphabetic glyphs must have open terminals; numerals and symbols must have closed terminals. Letters which do not terminate (D,O, etc.) must be broken so that they terminate.
3. Glyphs must fill the 15x15 grid.
4. Ligatures and combinatorial glyphs must fit into one letter's space.
5. Draw from the outside in.
Experimental 24-segment display or massive monochrome Mondrian matrix. Pixel compatible!
The thinking behind this one was that with incongruously sized segments arranged in the proper way, I would create a design which was effectively 5x5, but which accomodated more glyphs than 5x5 usually does. Negative space is incorporated into the structure of many glyphs, though not enough to classify this as an IVO design.
"Qualtron" is the name of an imaginary entity that a friend believed in - a being meant to represent the result of "a mathematical equation that can rule the universe". I didn't inquire further about it... :D
*
Design Rules:
1. Segments can have interior length/width of 2 or 5.
2. The central 2x2 square must always remain open.
3. Square bricks and 90-degree angles only.
*
Original size: 20.75pt (use multiples of this value for pixel perfection)
A 117-segment display made to have a more "mosaic" look. Try using this one at odd sizes, especially with antialiasing off! The resulting distortions occur in a consistent way which leads to many new uses for the font.
Original size: 38pt
I attempted a blackletter style without any knowledge or references. The result reminds me of a vampire's writing!
The name "Dethzmezenger / Death's Messenger" comes from one of many old joke bands which I created.
Original size: 17.25pt (use multiples of this value for pixel perfection)
I love the traditional French biscuits made on the French west coast where Loire meets Atlantic.
The biscuits are thin, crunchy, light, not too large, not very sweet, melt on the tongue, and biscuits very like the original can be made/baked quite easily.
The traditional version has a limited range of letters, enough to write the name of town, manufacturer and product. I've been unsuccessful in finding an image of the font which contributed just a few letters to decorate these biscuits.
I spent some time looking at other type of the Victorian/Art Nouveau era until I had collected enough information to help me design the missing letters. I added the French diacritics, naturally. I think my additions look successful and the whole font looks quite Art Neauveau and in the style used originally.
The square brackets [ and ] make a biscuit shape when used 'blank'.
Bon appetit, enjoy your "Biscuit de l'Ouest".
This is a clone of Petit BiscuitΔ ▲ Δ ▲ Δ ▲ Δ ▲ Δ ▲ Δ ▲ Δ ▲ Δ ▲ Δ ▲ Δ ▲ Δ ▲ Δ ▲ Δ ▲ Δ ▲ Δ ▲ Δ ▲ Δ ▲ Δ ▲ Δ ▲ Δ ▲ Δ ▲ Δ ▲ Δ
Welcome to Tridisaster. It's ALL TRIANGLES, ALL THE TIME. Welcome to Triangle Channel.
Mathematical operators have a distinctive "open" look to help set them apart. There are few exceptions (like ^) because these symbols are used in many non-math contexts.
The only one I'm not sure about at this point is the comma, which works fine for my purposes, but probably makes this font a pain for anyone who tries to read/write at length with it. XD
All Basic Latin is kerned for both cases! Use a mixed case to create weird alien scaffolding! Inverted ",." can be found on "µ¶".
Δ ▲ Δ ▲ Δ ▲ Δ ▲ Δ ▲ Δ ▲ Δ ▲ Δ ▲ Δ ▲ Δ ▲ Δ ▲ Δ ▲ Δ ▲ Δ ▲ Δ ▲ Δ ▲ Δ ▲ Δ ▲ Δ ▲ Δ ▲ Δ ▲ Δ ▲ Δ ▲
A 7x7 outline design which is made to form solid-looking masses from the glyphs while still allowing the outer perimeters of words to take on some unique shapes.
Original size: 5.25pt (use multiples of this value for pixel perfection)
Experimental mosaic... or maybe a new mineral species?
This one started as a doodle. I began placing circles to see what kinds of complex shapes I could make, and this was the result.
It achieves a new visual effect at almost every size up to the original. Also try slowly moving the zoom slider for some interesting animations!
*
This font is now nearly 1MB in size! I guess it has to do with the intrinsic complexity of circles.
An extension of ideas present in "Gehenna".
это короче как vcr osd mono но лучше.
this font is like vcr osd mono but better.
This is a clone of 12x16 iskraMrGoogleUSMWOStruct is a Minecraft-like or Fixedsys-like font
A good font!
Versions:
1.0 - Initial
This font is required for the following Windows versions:
Windows 3.1, Windows 95, Windows NT 4.0, Windows 98, Windows 2000, Windows XP, Windows Vista, Windows 7, Windows 8.1, Windows 10, Windows 11, Windows 12 and More!
That font supported other:
Android and Nintendo Switch
The font is also available for Android users:
Samsung, LG, Lenovo, Vivo, Realme, Infinix, Xiaomi, Redmi, Honor, Oppo, OnePlus, Tecno, Motorola, HTC and More!
The font is also available for iOS Users:
iPhone and iPad
Only for Download:
Mobile Phone, Tablet Computer, Handheld Game Console and Possible OS
This font was founded in 2000
A chimera (fusion) which combines inline-versus-outline, maze, Gemscript, and other techniques to produce a timeless look.
*
Original size: 6.75pt (use multiples of this value for pixel perfection)
Design Rules:
1. Square bricks only.
2. A 1px soft border of negative space must exist between lines whenever possible.
3. Glyphs must fill the 9x9 grid to the greatest extent possible given the rounded style.
4. The set of glyphs shall be a heterogeneous mix of symmetrical and asymmetrical forms.
5. Negative space will replace positive in any situation wherein the small grid size or the geometry of a letterform would be detrimental to the chosen style. This includes all situations where any shape lacks at least a soft 1px border of negative space around it.
See also: Terran Pixelcruiser
Original size: 15pt
*
A font which has a spurless, sans-serif, pixelated polygonal look which is somewhat reminescent of fonts used in VHS technology.
A lot of applied science went into this design. It's designed to remain legible on all media in all use conditions, provided that one uses the original size or a multiple thereof. Numerous technologies and mediums were employed to realize this objective.
"Diaspora" was tested and refined for use with/on/against:
• CRT, LCD & e-Ink screens
• image formats & compressed imagery (GIF, JPG)
• printers (inkjet, bubble jet, laserjet, & thermal)
• analog video & multi-generational copies (VHS, Super 8)
• digital video (AVI, MP4, MPEG, WEBM, WMV)
• 3D and voxel models (Blender, MagicaVoxel, POV-Ray)
• dynamic scaling hardware (game consoles and capture devices)
• imagery plugins & filters, including image degraders
• image scaling/interpolation hardware & software
• image recognition hardware & software
These all have traits which degrade, distort, compress, glitch, or otherwise alter imagery in various ways. This design aims to minimize the loss of legibility from these effects and to attain the best scores possible in various forms of imagery analysis. So far, this has proved extremely useful, as it can remain fully legible even when extreme JPG or video compression are applied to it thousands of times.
A piece of software I helped write, called the Marinan Imagery Deconstruction AI System (MIDAS), is being used on captured images of this font. The end objective is to realize the design which has the best all-around Marinan Interpretability Value (MIV) for all the tested platforms - the design which is considered by MIDAS to be the most legible in the most media under the broadest range of use conditions and quality levels.
MIDAS uses a set of considerations made with both humans and computers in mind, so a high MIV does not necessarily equal a better font - it just means one that the system thinks is easier to visually interpret. Note the use of the phrase "visually interpret" as opposed to "read". MIDAS tries to determine how well people and computers can tell what shapes are, not how much enjoyment they'll get from reading or how much strain they might undergo while doing it.
*
VERSION HISTORY:
1.0.0 - initial release.
1.0.1 - More Latin support added.
1.0.2 - First batch of tests run.
1.0.3 - gjy5&ßẞ were improved, some glyphs added.
1.0.4 - Second batch of tests run. Space width reduced.
1.0.5 - Experimentally converted to a rounded spurless design, then converted back to a plain spurless after testing. A few new ligatures were added.
1.0.6 - Cyrillic and Greek enter development. Many of these letters must be altered to be distinct from their Latin counterparts.
1.0.7 - Some spacing values changed to increase internal consistency. More difficult tests are being devised. However, since only I seem interested in this type of work, this project is going on hiatus for some time.
*
See also: AMFA, a font built with similar considerations in mind
The last entry in the Pseudostencil series... this is built at 2x2!
It seems like the sort of font I'd see carved in relief on the sign of an old pub.
"Sederhana" is an Indonesian word, meaning "simple"
with its simple style, funny looking "V", lack of diagonal lines, and its easy to read!
this font is CAPITAL ONLY!
note for Arab users:
بطريقة ما لا يعمل الجزء العربي من الخط ، لذلك يجب عليك استخدام الأحرف الأساسية النهائية والمتوسطة والأولية للكتابة بدلاً من ذلك
اسف على ذلك :/
somehow the Arabic part of the font doesn't work, so you must use the final, middle, and initial base characters to type instead
sorry for that :/
(نعم أنا أستخدم مترجم جوجل فأنا لست عربي, yes i use google translate, I'm not an Arab)
- Basic Latin
- More Latin
- Extended Latin A and B
- Greek
- Cyrillic
- Arabic
- Armenian
- Georgian
Intended Language Support
عربى-Arabic
հայոց լեզու-Armenian
Беларуская мова-Belarusian
български език-Bulgarian
Hrvatski jezik-Croatian
čeština-Czech
Dansk-Danish
Nederlandse taal-Dutch
English
Esperanto
Français-French
ქართული ენა-Georgian
Deutsch-German
Magyar-Hungarian
Bahasa Indonesia-Indonesian
Italiano-Italian
Қазақ, Qazaq-Kazakh
Melayu-Malay
Polski-Polish
Pусский-Russian
Српски-Serbian
Tagalog
Türk-Turkish
українська-Ukrainian
(ИнфиниНикиСтръкт Макс) InfiniNikineseStruct Max 5.13.95 is a pixel Unicode font which has many glyphs and typeable in many languages.
A good font!
The InfiniNikiStructMax font is required for the following Windows versions:
Windows Vista✅
Windows 7✅
Windows 8/8.1✅
Windows 10✅
Windows 11✅
The font is also available for Android users:
Samsung✅
Lenovo✅
Realme✅
Xiaomi✅
Redmi✅
Google Pixel✅
The font is also available for MacBook, iPhone and iPad.
Versions:
1.0 - Initial
The font is required to those YouTubers: Mathis R.V, DoDeca D., WTIF2023, SuperWindows78, NO!, me and TheNikinistPoliticianGuy.
I have seen that many FontStructors made fonts, so. Before my Birthday day, I decided to make NikiType as a beginner.
Only for macOS and mobile phone downloadable.
Added New in the PUA: Logos, Klingon, Aurebesh, Liran, Tengwar, Cirth, Shidinn, Cadexian, Nikinese, Latin Extended Appendix A-B, Phonetic Extensions Appendix A-B, Unifon, Seuss, MUFI-CYFI, CYFI, Myriad Pro PUA and Fairfax HD Alphabetic PUA, Kinya, Ordinateurfont Alphabetic PUA (deleted), Enclosed Numbers Appendix, Sitelen Pona (Toki Pona), Control Pictures Appendix-A, .notdef icon and many many more...
I added 11 conlangs.
InfiniNikiStruct Max becomes special and popular!!!
InfiniNikiStruct Max - a normal pixel bold font. minimalist sans-serif
INSPIRATION
===============================================
InfiniNikiStruct Max was founded in 2014 in Sofia, Bulgaria by architect Nikolay Atanasov. Literally translated as “hard work“ in Nikinese, the Nikinese typeface for mobile phone and macOS was born out of the pixels of designing basic necessities like Nikinese characters, presentation forms and hard work, with the core idea that form follows PUA.
Nikinese is my conlang:
In September 10, 2023 the hard work moved to Kazanluk for 3 days, where its ideal of creating a slow work of Extensions, Nikinization, and growing of letter entities flourished. Many now-iconic designers called the hard work, and their legacy of industrial pixels and functional yet big typography lives on today. The Islamic kingdom of Saudi Arabia.
By nikinizating industrial technology and fine art, the hard work masters and their characters designed functional objects that could be mass-produced with modern Nikinization. Their concrete and tall padding, many languages, and bold lettering for advertising posters continue to inspire creatives in all fields of art and design. Typography that leaves a lasting imprint.
Typography from Kostinbrod Municipality, Bulgaria is instantly recognizable. Simple pixel forms, unadorned with serifs. Vibrant, expressive colors. Balanced layouts that convey a clear and direct message. Some of the world's most celebrated ad layouts, political posters, album covers, and logo designs owe their power to lettering designs created at Kostinbrod.
It's considered to be the national font for the Kingdom of Nikolandia - the center of Nikinisia continent.
For Android or iOS to see more unicodes.
---VERSIONS LIST---
Version 1.0 - Initial release for NikiType.
Edit 1.0: Adding only Uppercase
Edit 1.1: Converting Lowercase Letters to their original form
Edit 1.2: Turning on Expert Mode
Edit 1.3: Added IPA
Edit 1.4: Even More Glyphs
Edit 1.5: Big Edit
After many Edits:
Edit ???: Starting PUA
---COMING SOON--
Other Planes
---MILESTONE OF DOWNLOADS---
50: Checked
75: Checked
100: Checked
---MILESTONE OF GLYPHS---
5000: Checked
8000: Checked
10000: Almost Checked
---LINKS---
---INSPIRATIONS---
Anthonistruct
STF_FAUXHAUS
Electronic Data
Nishiki-teki
Catrinity
Fairfax HD
AwesomeDylanStruct
NikiStruct (fake version)
Marnienese Sans (remastered via FontCreator modification of Calibri)
---PERMISSIONS---
If you want to download this font, you must ask me or Sed4Tives this:
"Can I download?".
---NOTES---
This font absolutely does not support Arabic, Syriac, Thaana, Mandaic, Tibetan and Devanagari.
---THANKS---
The InfiniNikineseStruct Max font is an official font that was founded in 1980.
It is powered by the Nikinese Government and Vyara Atanasova.
---COPYRIGHT---
Copyright © NKF2014. You can use or download this font anytime with permission only.
No rights reserved.
That's all for now. I hope you like it so far, cheers!
First attempt at a cursive pixel font. The name derives from an old joke band, whose name is itself a parody of the name of a toy gun by BoomCo, the "Rapid Madness".
Original size: 12pt (use multiples of this value for pixel perfection)
VERSION HISTORY:
09 Mar 2018 - v1.0 released.
10 Mar 2018 - v1.1 released.
13 Mar 2018 - v1.2 released. More Latin support added. The capital letters were cleaned up to make them nicer-looking when appearing in isolation. Excess spaces/lengths of line were reduced to make for denser-looking, more naturally handwritten words.
02 Apr 2018 - "More Latin" and "Google Fonts Basic" ranges finished. More shortening/optimization done for the extended Latin letters.
Latin alphabet in an Ashrian style, mostly using a 2x3 grid, and using only stacked triangular bricks. Capital letters represent the full letterforms and lowercase letters represent the truncated letterforms used in Ashrian printing and computer systems.
Ashrians are the inhabitants of Planet Ashr in my RPG video game "Seven Candles". Their signmakers, carvers, and woodworkers used triangular gouges for millennia to make their letterforms.
VERSION HISTORY:
16 Mar 2018 - v1.0 released.
Pixellated Proxima Punch. It's art deco for your ancient compy box! New smaller grid, same great taste.
Original size: 6pt. Use multiples of this value for pixel perfection. However, this one has been noted to look great at almost every smaller size. Try 7pt, 8pt, 9pt, etc. for slight variations on the look!
A fusion between Roman-style text and pixel art - the sort of font that might have existed in old 80s font software. It's fairly wide and verbose and is something of a colossus among pixel fonts.
*
Original size: 13pt (use multiples of this value for pixel perfection)