290981
Published: 3rd May, 2024
Last edited: 27th February, 2009
Created: 27th February, 2009
Clone of MikronH with rounded edges for the lowercase letters. Capital "G" & "Q" were changed a bit to fit better with the rest.
P.S. Cheers! I'm looking forward to making a HaxrCorp clone. ;)This is a clone of MikronH
2711663
Published: 3rd May, 2024
Last edited: 3rd November, 2010
Created: 1st April, 2010
Clone of MikronJ. I tried to make it as cubic-looking as possible while aiming at minuscule lowercase glyphs based around the 3x3 px grid (with some exceptions where it wasn't possible to do that). Only basic Latin and Cyrillic are supported for the moment. I may delve into less cubic clones of this font in the future...
I hope that you like it, comments and suggestions are welcome!
P.S. I also accept suggestions to add additional glyphs.
NOTE: Derivatives are allowed (read the license for details).This is a clone of MikronJ
60521
Published: 3rd May, 2024
Last edited: 26th May, 2012
Created: 26th May, 2012
Clone of PhoneStruct.
Just a little experiment--made the lower-case the same as the capitals, and then altered the whole thing in the following manner:
Capitals alternate between being flipped vertical and being flipped horizontal. Lower-case alternate between being rotated-left and rotated-right.
Still haven't decided for numbers and/or punctuations...
Would welcome any weigh-ins on this.
BTW--IMHO, I think it makes for a nice Vigenere Table, but I guess the "YMMV" rule applies....This is a clone of PhoneStruct
843912455893
Published: 26th August, 2008
Last edited: 9th June, 2010
Created: 22nd August, 2008
hey fellas.
let me introduce my personal CROSSOVER of "arial" and "times new roman", two of the most famous fonts of western typefaces.
nicely presented in a scetchy pencil drawn quickie style :)
it's just lower case yet, but i wanted to share it.
upper case, numerals and symbols to come. really :)
this is especially tasty in small pixel sizes! thanks for attention!
try it...
*UNDER FONSTRUCTION*
91990
Published: 29th September, 2008
Last edited: 29th September, 2008
Created: 29th September, 2008
Clone of gescheit.
messing around, some letters lookin quiet good, others are hard to read.
i like some of the numbers more...
This is a clone of gescheit
2211701
Published: 29th October, 2008
Last edited: 4th December, 2008
Created: 26th October, 2008
Sharp Progress! A font designed to be editable hence the name sharp progress. Some of you might also have heard of the name as it is a book. the only difference is that the book is Sharps Progress
20428410
Published: 30th October, 2008
Last edited: 4th December, 2008
Created: 30th October, 2008
This is a font based on the Numbers on my Victorian tube station clock. Caps and Lower case are the same. Edit if you want.
120260
Published: 2nd November, 2008
Last edited: 4th December, 2008
Created: 2nd November, 2008
Clone of Beat Down! filled in version.This is a clone of Beat Down
100811
Published: 6th December, 2008
Last edited: 10th December, 2008
Created: 30th November, 2008
Clone of my Calculator font. This font is a replica of the letters my TI-84 PLUS calculator uses (see my "Calculator" font) with the capital lettrers stylized with straght angles. Check back soon; I will eventually add angles to the lowercase letters.This is a clone of Calculator
812331
Published: 16th April, 2009
Last edited: 21st April, 2009
Created: 15th April, 2009
This is the starting point for a project I'm running here on Fontstruct about collective development within type design. It is a part of my thesis project at Beckmans College of Design in Stockholm, Sweden.
I am interested in trying to push Fontstruct's limitations and try to make the "best" font possible due to readability. I am producing a catalogue about Open Source thinking whitin design. I want this catalogue to use this typeface for all the text. Since Fontstruct has the possibility to "Clone" typefaces it would be a good place to collectively try to develope a typeface. And since Fontstruct has an Open Source approach it would be a good platform to try out an experiment like this!
You are welcome to join the project by cloning these sketches or make a new font. The goal is to make a typeface that will work good in longer texts. Name your submission "Open Text" and add your name or anything after to keep track of the different fonts in the project. Use the clone feature to develope other submissions to make this a collective thing! Publish your work even though it isn't a complete font set. Other people might get ideas from your work that will gain the quality of the project!
I have posted invitations to join this project at different forums/blogs. Read the invitation here: www.selectedworks.se/opentext
If you have any questions, please contact me at: aronkullander@gmail.com
Hope you will join the project!
Regards,
Aron KullanderThis is a clone
821010220
Published: 21st April, 2009
Last edited: 6th May, 2009
Created: 12th April, 2009
This typeface was created using sketches from "Open Text", wich is a part of a project to develope as legible typefaces as possible (in print) using FontStruct. If you have ideas of improvements please clone this font or visit the link further down for information and more sketches to work with.
Join the project and read more at:
http://fontstruct.fontshop.com/fontstructions/show/171664
To read a longer invitation, visit: www.selectedworks.se/opentext
/
Aron Kullander-ÖstlingThis is a clone
112382
Published: 30th August, 2009
Last edited: 8th September, 2009
Created: 30th August, 2009
This is a Clone of Bdizzle. I made it into a font that looks as if it is made out of smeared bubbles. What do you think?This is a clone of Bdizzle
54653
Published: 6th September, 2009
Last edited: 7th September, 2009
Created: 19th August, 2009
Ahh.. a brand-new language created by moi. Thank you, thal, for letting me have some fun with your beautiful font.This is a clone
1111729120
Published: 18th November, 2009
Last edited: 5th January, 2010
Created: 2nd November, 2009
Clone of slubgob.
I saw some stringy potential dyed in the wool of intaglio’s original and tried to draw it out. First I added one brick to the x-height; second I added little connecting, er, nubs for a very tightly spaced continuous script. From there, I was basically done, but then had very little restraint and took it to this point, which is now sort of a mishmash of styles (let’s just go ahead and rule out all caps settings right here and now ;)
I am hoping one of y’all fontstructors will chime in with the next version that really knits the job up all nice like! Or, barring that, I will try to tighten it up and continue to defer all praise to intaglio.
Edit [12/10/09]: After receiving the blessing of intaglio, I added More Latin and the first half of Extended Latin A. This fontstruction is nearing its final stitches, however I still welcome suggestions and additions. As seen in my samples below, it seems to work well with a rounded outside stroke. Be forewarned: Approximately -10 tracking and some manual kerning are a must to properly render the connected script effect. Enjoy! : )This is a clone of slubgob
1411222
Published: 1st April, 2010
Last edited: 1st April, 2010
Created: 24th March, 2010
A small clone of the freeware font "04b_03b" by Yuji Oshimoto (http://www.04.jp.org/) with some minor changes to some of the glyphs ("P", "4", "6", "9", "~").
Some additional punctuational glyphs and characters with diacritics are also added, hence the name of the font.
It's a WIP (work-in-progress) which means that I may add new glyphs (letters) to it later...
901061
Published: 7th November, 2010
Last edited: 7th November, 2010
Created: 7th November, 2010
Clone of Open Text Rounded by Aron Kullander.
This font has crossed 0, 7 and Zs to reduce confusion when reading these characters.This is a clone of Open Text Rounded
1061801
Published: 11th January, 2011
Last edited: 2nd April, 2011
Created: 11th January, 2011
Clone of Structurosa Caps.This is a clone of Structurosa Caps
4711713
Published: 15th January, 2011
Last edited: 15th January, 2011
Created: 15th January, 2011
This font is used by Club Justin. Club Justin Thanks smallbar for this fontThis is a clone of TRON Legacy Full
1591417247
Published: 4th March, 2011
Last edited: 5th March, 2011
Created: 4th March, 2011
How about this way, Xenophilius? :^)
It looks, err, rather covoluted at the default display size. Try zooming in! 8)
P.S. There’s a starting character on Í (option+shift+s for Mac). Spaces can be used to pad the wave effect and create shapes and background textures. Enjoy!
130863
Published: 21st May, 2011
Last edited: 21st May, 2011
Created: 21st May, 2011
All I did was take N-stack and add a simple checkers-pattern-click to each letter.This is a clone of n-stack
102621
Published: 27th May, 2011
Last edited: 18th June, 2011
Created: 12th May, 2011
First I made the the font app Mazemone. Then Neurone error made the spectacle Mazemoneurone. Then, to show my like, I made this!This is a clone
401511
Published: 17th June, 2011
Last edited: 17th June, 2011
Created: 4th June, 2011
Briixx now has diacritic marks from More Latin!This is a clone of Briixx