An extra "X" at the "x" glyph, thanks to @Dmitriy Sychiov.

PHOTONIA (Pro) - 70s future retro style
═══════════════════════════════════

70s style reverse contrast sans with future retro aesthetics, perfect for projects with a vintage sci-fi, space age or computer theme.

This is actually a refurbished and extended version of an older FontStruction I did back in 2019. The original PHOTONIA was a cool looking little work, but didn't quite made the most of its design concept. Inexperience and poor design decisions had led to inconsistencies and other flaws throughout the font. Besides those it also had a small character set that mostly consisted out of the basic Latin block and bare essential symbols & punctuation marks. But imo it still had quite an interresting retro vibe and the potential to be more. So I decided to give the old project some well deserved refreshments.

First I started eliminating the inconsistencies that were present in the older work, than I continued polishing and re-design / modify several characters hoping to create a greater overall unity to the entire piece. Once I was fully satisfied with this renewed improvements it was time to build and expand the character set towards a more complete lingual and typographic support.

➜ ⚠ Previous Version:
 ▶ Basic Latin only
 ▶ Minimal kerning

➜ ⚠ What's New Inside:
 ▶ Additional Latin and accented Latin
 ▶ Diacritics
 ▶ Many glyph alternative forms
 ▶ Additional symbols and punctuation marks
 ▶ Horizontal box drawing (page deviders)
 ▶ Typographical symbols
 ▶ Ornamental printer's characters
 ▶ 1680 stored kerning pairs

Cheers

Latin 89%

Hiragana 100%

Katakana 100%

Unicase font with a lot of alternates in the lowercase to improve the general playfullness. Also added more diacritics and accents, and remodeled and kerned the old glyphs. (Plus: other "1" at the "t", the 3rd "U" -and their accents- are at the "v", "ò", "ó", "ô" and "ö", respectively.)

ETC SOLID42
ETC SOLID42 is a futuristic display font based on The Studio Temporary & RetroSupply Co.'s SOLID70 (https://www.retrosupply.co/products/solid70-font). 

a chubby, chibi art deco font.

completely unrelated, but if anyone has a time machine back to the heavycomp, it'd be greatly valued~

ZEPHTON (Pro) — 70's future retro / sci-fi style typeface
═══════════════════════════════════

[ INTRODUCTION ]
A revival of the Sci-Fi lettering used by the “Atlantic Toy Company” for their “Galaxy Serie”. A science fiction themed toy line that was manifactured from 1978 to the early 1980s.

The lettering seen on their packeging uses a modified and filled version of a typeface called Paperclip Contour, which was designed by Dutch graphic designer Ad Werner, and was issued by Mecanorma in 1973. There is very little information provided on the web in regard to the original typeface by Werner. And even fewer images. Nothing that show a complete character set, only FontInUse submissions. But taken from the research I conducted I can safely conclude that the original Paperclip Contour typeface has just one style, which is outlined, and that it includes a lower case(a-z)  letterset with numerals and just a had full of symbols and punctuation.

That being said, this actually is the second revision I did for the lettering. The innitial first version had a super basic character set, as well as a couple of mistakes included alongside some compromises in respect to certain glyphs. This was due to the limited knowledge I had in regard to the use of the FS-editor at that time. So the font wasn't 100% accurate. This newer version correct most of the inconsistencies that were present in the older version.

Due to the incomplete resource material on the original Paperclip Contour by Werner I can't check accuracy of this newer version. But I think that apart from the thicker weight in Zephton its 99% accurate.

Where the older version ran short by a lot, this new revision in fact can qualify as a full font, with everything from numerals, symbols, puntuation marks as well as accented letters for more Latin languages. And ever some glyph alternatives. Making this much more of a functional font.

[ THE FONTSTRUCTION ]
The font is a “Unicase” style typeface that has only “Minuscules” included. There are glyph alternate forms for several letters as well as a secondary set of numeral figures. These characters are located in the Unicode blocks for “Halfwidth And Fullwidth Forms” and “Private Use Area 1”

There is also a full  (a-z, 0-9)  alphanumeric set with “Contour Outlined” glyph alternative forms, which is located in the “Private Use Area 2”

The font saw a major update that tied everything together, and sort of finalizes the font for proper use.

Several characters have received minor adjustments in order to find a balanced harmonic distribution of typeset material. Also several improvements have been made to the overall shape and form of various characters. In addition to that numerous new characters been designed, expanding the character set even further.
Work also continued in the metric department, building the kerning table, that contains 2368 stored kerning pairs so far. Spacing was reduced by 50% to tighten the letter fit significantly. To round things up and convert it into a more functional typeface some of the characters were rearranged and/or relocated to different Unicode blocks.
═══════════════════════════════════

[ CONTOUR OUTLINED GLYPH ALTERNATIVE FORMS ]
The contour outline glyph alternative forms are not 100% accurate conversions of their solid counterparts. This due to minor design difficulties that simply made it impossible to fully execute it at its current size and with this thin stroke weight. The deformities are simply the result of a lack in fully smoothened stroke contours in some of the transitions from diagonal to curved parts. These flaws are minute, and mostly only noticable at large size rendering, but nonetheless present. In small to medium size text these imperfections are  hardly visible, and pose no real problem. Anyway.. the contour outlined glyphs are still very close approximations nonetheless, just so that it happens to be with a small number of tiny imperfections.

As a direct result of this the two sets with glyphs do not fully match and therefor not seemlessly overlap.  

This can be ignored for most part in the majority of the font's application, but it does create two important limitations:

1) Contour outlined glyphs are unsuitable for vector path outline rendering when the stroke alignment is set to "Outside" (Configured like that with threshold for the corner point angle set to sharp these imperfections in the glyph contours can generate spikey disruptions to appear in the stroke rendering).
— So this configuration should be avoided.

2) The two styles are unsuitable (or incompatible) with stacked “multi-layer" overlay text compositions.
— Simply due to the fact the two variations aren't a 100% true match.

They do on the other hand, combine perfectly side-by-side in text composition.
═══════════════════════════════════

[ MORE LIKE THIS ]

There is also this other FontStruction that was inspired by Ad Werner's font Paperclip Contour, called Neue Werner Paperclip, this one was crafted by fellow memberfunk_king

Thats it for now...

Cheers

Lowercase font with some alternates (a, e, f, j, m, p, t, w) in the uppercase. The "tt" & "ff" ligatures are at the ""fi" & "ff" glyphs.

Font directly inspired by Cookielord's "Gargantua". That's why I thought of calling it "Pantagruel" (remembering the name of the other gluttonous giant, son of Gargantua, immortalized by the writer F. Rabelais), but it didn't start with z -hehehe :) - and I chose "zampatoo" (wich could mean something like "eat-it-all"). The final result has lost the rotund, forceful and fresh aspect of the original, but has retained some of its overall heaviness and massiveness. During the process it has also gained some curves. Risky font. Good for headlines, bad for body text. Extra "tt" ligature at the "fl" glyph. Hope you like it. Yummy, yummy... :D

STF_NEUE ISAIAH - 70's Art Deco / Streamline style typeface
══════════════════════════════════
Most of the design credits for this font should go toIsaiah Garciasince I took the liberty of revisiting her fontstructionFS Idea

Please check out this member's awesome contributions here:Ivy Meadows (Isaiah Garcia)
══════════════════════════════════
[THE PROCESS]
The one major difference between the two works is the grid size and construction method, Isaiah's version was made using a faux-Bézier approach (very labour intensive) and requires a fairly large design grid, whereas my version is a small grid design, utilizing the circle arc bricks and composites to achieve smoother contour quality, and was done on just a 4x7 grid using 2:2 filter.

This different approach and limitations in small grid designs have led to a number of small changes for certain glyphs. Also have I change some details slightly to my personal preference. But it remains very much Isaiah's design.
══════════════════════════════════
[THE FONT]
I tried to remain as faithful to the original font as possible, and in addition tried to further expand the character set. Most important differences made in my revision are the additional lowercase chatacter set (spurred strokes), the uppercase alternative forms / lowercase alternative forms (spurless) and extra symbols.

Enjoy!

LEOPOLD PRO (Sans-Regular) — Modern geometric condensed sans
════════════════════════════════════
This is a minimalist, geometric sans serif font with medium contrast and a strong compressed look. The modern condensed forms make up an elegant and classy looking font.

The overall design is a mixture of contemporary design with antique inspired elements.

The other style can be found here:
LEOPOLD PRO (Serif-Regular)

Cheers

Use ‘V’ and ‘W’ as initial forms of ‘v’ and ‘w’ respectively.

LORD KRUMBLE —A transitional sans that mixed Art-Deco with neo-classical humanist minuscules

════════════════════════════════════

Inspired to celebrate the homecoming of him who strikes fear in all badly baked treats, the one which nightmares are made of, that kind of person that makes every cookie crumble and wanna skip school for a day or two. Of course I'm talking about the one and only "Cookielord".
— "What could'nt be better suiting than to have a freshly crasfted and new font that is celebrating his return."

Him recently dropping a new FontStruction somewhat came as a pretty unexpected but nice surprise. It just so happened to be that I was already looking for new ideas that could lead to the next project. In fact, until recently I was actually still struggling with this, and hadn't really been able to provide a catchy and motivating design theme to bring to the table that would once again help me on my way with starting a new FontStruct project. So I took this occasion to see if I was able to find a little inspiration in his Verminfont. Not particularly aimed at doing a derivative work, nor anything closely resembling his cool font. Instead rather trying to draw some inspiration from that peculiar and playful but friendly characteristic, that to me personally distinguishes his Vermin font the most anyway.

╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍

And so I appoligize for the fact that this doens't truly relates or do justice stylistically in any way to the aesthetic present in Cookielord's original Vermin font. That being said, this is what became the end product of that.

But, it does have one striking resemblance that pays a homage to him, and that is the included cookie. Sorry I took a bite out of it my friend, hope you can still appreciate it.

— Just to let you know that regardless wether you decide to stay or not, your recent return isn't going to be for nothing!!

╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍╍

No 'Brick Size' filters were used, which of course presented me with a lot of challenges that limited the amount of complexity I was able to put in, something that wouldn't been the case with (2:2) 'Brick Size' filter settings. The other noteworthy aspect to this particular fontstruct is its grid size, which is tiny. Never before have I made a Fontstruction that required kerning values to fluctuate only as little as 0,01. This also made it impossible to implement optical corrections on the vertical axis in the form of overshoots, but luckily this didn't became a very clear issue in the end.

I'm not sure if I can complete the additional Latin accents for all characters due to the limited grid space available surrounding some of glyphs. I might try doing those later.

Let me know what u think of it so far fella's, stay tuned!

Cheers

A — single-story “a”;
B — alternate “a”;
E — alternate “&”;
H, I — double-story “g”;
P — alternate “r”;
C, G, L, O, R, T, X, Y, Z — alternate “c”, “l”, “o”, “r”, “t”, “x”, “y”, “z” respectively;

Reloaded and much more complete version of zyrup with a lot of remodeled and new characters (more than 130, full caps set included, plus usual kerning). An extra "y" placed in the "™" sign, and the two original alternate "v" and "w" can also be found now in the "fi" and "fl" glyphs.

It all started as silly, trying to slightly modify the original "@"... and has ended in a practically new font (106 created glyphs, 32 modified, 68 remain intact). Seeing the final result, I think it was worth it, the font grow up. Hope you like this new dress.

a @flakke -inspired constructivist/east asian geometric sans with @bluemon -derived curves

There is also an alternate "s" in the "™" glyph, and the "ff" and "tt" ligatures placed on "fi", "ff" and "fl" respectively.

Opening day of Ant-Man and the Wasp::Quantumania! So of course, this particular color font needs to emerge in this space and time. Spinning of the concept of quantum tunneling and Hank Pym's Quantum Tunnel van, this font spans multiple realms simultaneously. Shift dimensions at your own risk.

An old project, finished now. 70s vibes. Hope you like it.

Sort of mixing ideas from "tuxedo blvd" and "tinseltown." Keeping with the "t" naming trend between them, here is yet another Art Deco font, "trailblazer," please enjoy~

yet another quick lowercase
some alternates (a, e, g, k, v, w, y) in uppercase

Unicase font with alternates. Special characters: Blank space at the "\", "LT" pair (kerned) at the "fi" ligature and the "TJ" pair is at the "fl" too. Better to see the font at big size. Enjoy and Happy New Year 2023!

Please be aware that some characters and all numbers are not available due to a lack of resources. Apologies!

Frutiger Aero brings back memories

SANS SERIFSCO — Humanist / Neo-Grotesque Sans-Serif

A contemporary neo-grotesque sans-serif design with regular weight.

I tried to add subtle diverse and nuanced visual elegance while still remaining minimalistic. Most significant feature is the subtle stroke modulations, distinguishing this from a more geometric style.

Designed to be versatile and suitable for a wide range of different purposes and optimized for legibility in small point size body copy.

The font was constructed on a large grid using linear interpolation (also known as faux-Bézier method). This allowed the most freedom for constructing more complex custom forms, curvatures and all the various stroke modulations.
The font has a total vertical height of 88 square grid units, this is including all optical compensations, ascends / descends and accents.

Optical experiments continue. "ff" and "tt" ligatures are in the "fi" and "fl" glyphs. Hope you like it.

A Bauhaus/Deco inspired sans with a dash of VJ Type

This typeface has been created surrounding the theme ‘Protect’. I took inspiration from the physical format of bubble wrap, which is why this font is made up of dots. I focused on the 3D aspect of it being unravelled - how it is thicker when rolled up, and thinner when unravelled.

The typeface mimics a shadow at a 45 degree angle. This can be seen in the slanted increase in thickness at the bottom, contrasting the thinness of the top.