Added "ACT"
This is a clone of Sonic 1 Title CardA square font for building ASCII maps for Roguelike games.
Changes from Sophistry Sans Modular by Scott Calo: All glyphs were centered on a letter width of 29 bricks, with Monospacing at 39.0; Created glyphs for @ ^ &; Stretched { and } vertically; Reduced the height of |; Narrowed W and w and removed cross at top; moved vertical slashes on # inward.
This is a cloneSpray.ME is a classic stencil typeface, a bit inspired by Impact, but with a little twist. Hold Shift while typing for a dirty effect of fresh paint dripping from the letters. Stains, splatters - just like it was sprayed a few seconds ago. "!" hides behind "\" and "|".
I realize that there are tiny holes scattered over letters with the paint effect, if this font is going to be disqualified for that, I can remove them. :3
Ah - there's a tiny spray can dingbat!
PRESS THE “PIXEL” BUTTON ABOVE FOR THE BEST RESULTS.
WELL, IF I WASN’T CRAZY BEFORE, I DEFINITELY AM NOW.
I WOULDN’T RECOMMEND DOWNLOADING THIS FONT. IT WOULD PROBABLY CRASH YOUR COMPUTER OR SOMETHING.
CLASSES
• “A”:AMBASSADOR CLASS
• “B”: OBERTH CLASS
• “C”: CONSTELLATION CLASS
• “D”: DEFIANT CLASS — U.S.S. DEFIANT (STAR TREK: DEEP SPACE NINE)
• “E”: EXCELSIOR CLASS
• “F”: FREEDOM CLASS
• “G”: GALAXY CLASS — U.S.S. ENTERPRISE D (STAR TREK: THE NEXT GENERATION)
• “H”: GALOR CLASS CARDASSIAN WARSHIP
• “I”: INTREPID CLASS — U.S.S. VOYAGER (STAR TREK: VOYAGER)
• “J”: TYPE VI SHUTTLECRAFT
• “K”: TYPE VII SHUTTLECRAFT
• “L”: LUNA CLASS
• “M”: MIRANDA CLASS
• “N”: NEBULA CLASS
• “O”: OLYMPIC CLASS
• “P”: PROMETHEUS CLASS
• “Q”: K'VORT CLASS KLINGON BIRD OF PREY
• “R”: SOVEREIGN CLASS
• “S”: SOYUZ CLASS
• “T”: TYPE XV SHUTTLECRAFT
• “U”: DANUBE CLASS
• “V”: VOYAGER’S AEROSHUTTLE
• “W”: D'DERIDEX CLASS ROMULAN WARBIRD
• “X”: NOVA CLASS
• “Y”: BORG CUBE
• “Z”: NEW ORLEANS CLASS
• SPACE: ACTUAL SPACE
Here is a gift to the community.
-----------------------------------------
This is a collection with parts and bits for small grid designs, (5x5 max) Each related to the assembly of smooth and (near) Bézier-like curved shapes and round letterforms.
-----------------------------------------
As some of you might very well know, one of FontStruct's holy grail is custom circular and curved forms. I'm talking about those not simply build with off-the-shelf bricks from the standard brick pallet FontStruct is providing.
Making these can be a very difficult process. Since the bricks in the default pallet are a far cry from what is truly possible with some clever use of FontStruct's editor features. Although obviously there remain serious limitations when it comes down to making different curves and round forms, there still is a lot room available to work in.
Most of the seasoned users know and utilize this very well, but, as with each of us, it took time and dedication in order to learn the tricks of the trade!
With a little knowledge, clever thinking and a healthy dose of outside the box thinking one can still get a lot out of FontStruct.
This font is meant to serve as a helping hand and inspirational / educative tool. Providing some insight into making numerous curving and rounded forms, various transitions, achieving different weight contrasts, and how all the various building blocks were aligned in order to make the various parts.
-----------------------------------------
Most important features used for this process are:
Brick Size filter: Must be changed to a 2×2 value in order to use the elements in this font.
All functions found in the "Modify" menu: Flip rotation and nudge are used to make alignments and to fill up the gaps.
Make composite: (also found in the Modify menu) This function will mainly be used to do two tasks, resize, modify/distort brick shape,
placement and orientation of bricks within the brick grid square for the required given composite.
-----------------------------------------
The font itself contains a collection of different premade elements divided into 3 main groups that I will list bellow. And can be found in the uppercase, lowercase and numerals sections.
[Uppercase] Various pre-assembled variations of the letter O, to demonstrate different variations for a round letterform. These were sub-divided and grouped according to their relative height!
[Lowercase] "Copy & Paste"-ready isolated parts 'n bits (curve segments, terminals) aimed at re-constructing and use in your own projects
[Numerals] Various random examples of letters that have curved/round features implemented in some way.
A fonts height probably is the most dictating parameter in type design in terms of behavior and appearance. Therefor, with the collection of pre-build vatiations of the letter "O", I choose its relative height to further sub-divide them in, rather than weight, since these are already completed letterforms. This makes up for the easiest access to a "drag/drop" adaptation into one's own project and build a full font based upon it, mainly for those that come with only limited experience.
This tool is to make one's FontStuct experience a little easier or to save time. So feel free to clone it and use the content however you like.
Re-use any of the provided elements, copy/paste the letter examples into your own fonts, deconstruct and re-use the various parts. Or simply just take a peek under the hood to see how they were build, This can be done via the "Menu>View>'Outline' " function.
There are no restrictions to how the content is used.
-----------------------------------------
More additional curve variations and different related other elements will be added soon. I have to select them from my various random works and this takes some time. Please stick with me on this one.
The intent is to try keeping this a ongoing project, so hopefully many more updates will follow and eventually turn this into a "all-in-one" tool for small grid designs. So far I also have plans for including a collection with different serif style, but this is something for a future update as well!
For now, curvatures it is!
-----------------------------------------
Note that, all content and forms in this font were created by myself and were gather from the various projects I have made, most came from published works, but some were taken from private material as well. We all here work with the same tool + limited brick set, so I am pretty sure certain elements in here were done exactly the same way by other users. Please don't accuse me of using others or your material without approval, this is just a case of unfortunate coincidence.
-----------------------------------------
[Usage]
The elements are best used by way of copying them from this into your personal projects, and work with it from there! This because the "My Bricks" pallet in this font is messy, probably very uncomfortable to work with as is. Copy & pasting them into your own font re-arranges the selected brick set for that segment into your own font's "My Bricks" pallet, making it much easier to get sense of its individual bricks.
Another very important thing is, I strongly advice not to nudge any of these what so ever, unless investigated its composition first. And I cannot rephrase this enough, seriously, never, or brace yourself for absolute dire results!
This due to the numerous counter-rotated or different directions of nudged 'into place' elements that make up a complete segment.
There are some elements included that at first seems to be looking like doubles, with onother one looking exactly the same. This is right, but these are constructed using different configurations of bricks. The reason for this is to provide alternative configurations for them. Some scenario's can make one approach to be working just fine, and the other simply not. This all hangs in strong correlation with the current nearby configuration of bricks, and simply depends on the whatever spot still remains unused in the surrounding grid. Since available grid locations to start working from are usually very limited. Its like this, Taller and/or wider letterforms meaning more available space to work from and place your bricks, but the smaller you go, the more scarce space becomes, simple as that.
So best is to use and work with this tool on a copy of your current glyph to verify no bricks will be raplaced and ruin the current glyps, and only to replace the original glyph once you're absolutely sure everything worked out well together.
If something else isn't clear or if you have any questions in regard to this tool, feel free to ask those in the comment section bellow.
-----------------------------------------
One final thing, beware that some of this elements can possibly influence the font vertical metrics (font size and leading/vertical spacing) and create addition extra line spacing. As well as the letter width. So be sure to allways double check those two when u use any of this.
-----------------------------------------
PS: My apologies for the "too much" of a explanation above, lol.
Happy structing,
cheers
Collection of linear-interpolated circle attempts, or simply faux-Bezier circles and other curvature related materials.
This toolset basically is collection of pre-made fake circles and curves in numerous different sizes to make ones workflow easier. It could also simply serve as a educative tool that demonstrates the basic FontStruct technique used for making fake curves and circles.
Initially I intended this to be much more complete, but it is simply too much work, and would take forever to get published at once.
Please don't expect this to be perfect, a lot gets fairly close to the "real-deal".
But keep in mind that they remain raw approximations of their true Bezier counterparts. I will try to improve whatever is needed as time progresses, as well as most likely add more stuff.
--- No filters were used ---
I hope you like it so far,
Feel free to copy, re-use, improve or even destroy!
enjoy!
Modified clone that provides a style variation to the previously published Jurriaan Schrofer font revival I did, called "STF_SATER (Isometric)".
The earlier version I did was in fact amongst my very first font designs ever, and at this stage I still had about zero real typographic background knowledge.
Due to this I simply went out copying the exact lettering 1:1 as was seen in the source that I used. Not realizing that the angle of projection applied to the lettering in the original would render my font next to useless.
So I ended up with cool looking isometric letterforms that were heavily handicapped in a full font.
This time I overhauled the original and got rid of its isometric nature and simply just making it a regular, fully upright style.
Now with this addition it finally becomes a truly functional font at last.
I hope you like it !
This is a clone of STF_JS-SATER (ISOMETRIC)Everything is completed !
yay
This is a clone of STF_LENA_(Inline)Mostly a filled version to DECODER but with some modifications, especially on the diagonals. This because the way they were designed in the outlined DECODER font made them look far too thick in a solid version. So on these I cut weight to get a better visual balance. I kerned some pairs but a lot still needs to be looked into, which I will soon!
Cheers
This is a clone of STF_DECODERSTF_Teknolog1k - Contemporary tech looking sans-serif typeface.
Once more a pretty thin design.
Brick filter @ 1x1
grid scale @ 0,85x0,85(to restore unwanted vertical spacing caused by nudging)
0.5 grid square unit weight.
Enjoy!
This was a simple idea started from S and T. Most of the glyphs have two verticle strokes that are 4-bricke-wide and a 1-brick-wide area in the middle of the character. except I, L, S and T (actually a lot more). They are a bit different. Especially S, T and L. The whole characters are only 8 bricks wide. As I mentioned above, It's because the whole font started from these characters.
Straka the name came from last name of a person. The S and T reminds me of this person's last name. I like this last name although I don't even know him.
About the Latin extension, I have made only the glyphs that require no new design, just diacritics and already made letters. So I can pretend like hard-working on fonts but copy paste in reality. :P
Also, I made Arabic glyphs. Only isolated forms. Which I suppose won't be a comfortable experience to Arabic users. It's like every letter has crazy swashes but every letters are lightyears away from each other.(or is it?)
Credit me bcuz it took days and I gave it all to you for free. Unthankful hairless ape. :p
has it gone 2 far? hope it didn't hurt you.