My little personal and humble tribute to our Astonishing FontStruct on its 16th birthday, full of admiration and respect for the Great Creator & Big Chief Rob Meek and all fontstructors, big and small, who used it during these amazing years! LONG LIVE FONTSTRUCT!!!
DOBINI BALWAUM (Inline) — Didone-style 18th century modern serif
═══════════════════════════════════
Dobini Balwaum is a Didone, or modern, serif typefaces inspired by the works of Bodoni, Didot and Walbaum.
This font had been in the making for quite a long time as I ren into several design difficulties along the way. Most challenging parameter was the inline width. By default the width for the inline was set at 0.125 (or 1/8th) grid units.
Maintaining a constant width for the inline proved to be next to impossible. Therefor it evolves around a 'close' approximation of 0.125 units instead. Stroke weight for the letterform contours also proved to be somewhat of a constraining factor for the overall design concept. As it limits the ability to build complex geometry.
Due to the complexity in brick arrangements the font remains having some minor imperfections that I wasn't able to polish out so fat yet, and some may never will..
For now only Basic Latin letters, it remains a WIP
I hope you like it so far,
Cheers
Gr4ftY presents:
SCORN
“Does this font look trustworthy to you?”
This took a while to make but I’m very happy with how this turned out (even though this is far from finished!)
If you have any suggestions for improvements, please tell me in the comments and I will try them out if I can.
❤️fs
Based on the font 'Kettler' (Eric Olson, 2002), which in turn is a tribute to the great 'Courier' (1955) by Howard "Bud" Kettler. As often happens to me, this recreation was born from the attempt to improve some characteristics of the original glyphs that I considered appropiated, in addition to being able to have a personal modern typewriter font. The monospace of this kind of letters has been a bit relaxed on this occasion. PS: Thanks for the helpful hand from @Sed4tives!
This is a cloneIt's silly (but I couldn't get it out of my head): This is the font inside zignbox. Absolute negative space use. Unicase with alternates, of course. But it works well!.
This is a clone of zignbox eYe/FSAa: Argentina, Australia
Bb: Brazil, Bangladesh
Cc: China, Canada
Dd: Germany, Denmark
Ee: Spain, Ethiopia
Ff: France, Finland
Gg: Greece, Ghana
Hh: Hungary, India
Ii: Italy, Indonesia
Jj: Japan, Jamaica
Kk: South Korea, Kenya
Ll: Latvia, Lithuania
Mm: Mexico, Malaysia
Nn: Norway, Netherlands
Oo: Oman, Austria
Pp: Poland, Pakistan
Qq: Qatar, Guatemala
Rr: Russia, Romania
Ss: Sudan, Saudi Arabia
Tt: Turkey, Thailand
Uu: United States, Ukraine
Vv: Venezuela, Vietnam
Ww: Belarus, Sweden
Xx: United Kingdom, Israel
Yy: Yemen, Iceland
Zz: Zambia, Zimbabwe
I will add more in the future...
TEFlonALuminium — A contemporary geometric sans-serif
═══════════════════════════════════
Inspired by the brand logo for French kitchen and home appliances company 'Tefal'.
The font is an extrapolation from the five letters that make up the original logo. I have made some small changes to certain characters to make them more suitable for a full font and body copy text format.
I hope you like it..
Cheers
This is a cloneDredging another font from the long-lost depths. "Zastava" was my first font to be given a Top Pick, a not-so-subtle take on the Art Deco classic "Bifur." The naming convention for fonts at that time was translating random words into other languages and finding the "coolest" sounding one. "Zastava" being a Serbo-Croation/Slovene word for "flag/banner." This reinvention borrows from the old trend using another vexillology term, referring to the swallow tail design of the "K" and "M" among others. Please enjoy~
Gr4ftY presents:
Foundry DS
inspired by frodo7's most recent work, this is the result of me trying it for myself. Still, this is far from perfect, and any help would be greatly appreciated.
THIS MAY BE EXPANDED APON IN THE FUTURE.
Shorter externsion variants for letters can be found at their lowercase equivalents. No extensions can be found at: A - @, C - o, E - {, G - }, H - #, J - ], K - \, L - [, N - %, Q - ^, R - `, S - $, X - ~, and Y - |. An underscore can also be used to make the extensions longer.
Twin brother of zeronda, with more spectacular and rare large serifs. This font is a pretty little thief to me: with its big serifs it stolen my hart. It was love at first sight, as soon as I started I couldn't stop adding them to the glyphs. Only caps/unicase, also includes an "a" and "e" alternates... and a little "c" in the "¢" glyph. Kern in progress. Enjoy.
This is a clone of zeronda eYe/FSGr4ftY presents:
Bolden
Just a simple bold font.
feel free to give critique, as long as you have something helpful to say.
i would especially appriciate help with the greek.
thanks:
to @Kiên Trung for helping with the Υ
to @elmoyenique for helping with the y
to @Sed4tives for a bunch of bits and bobs here and there (c, t, and n, to name a few)
additional info:
X height: 5
Cap height: 8
letter width: 5
Filters: 2x2
I was looking for an excuse to play around with color layers, so I colorized one of my old Dingbot designs.
This is a clone of Dingbots and Monsters XLa little something I had in my head for quite a while already, finally decided to try and make it in Fontstruct.
No kerning done right now, but maybe some time later I'll do it. though even without the kerning it looks nice in my opinion.
Feel free to clone and see how it was done. (some glyphs like { are quite messy though)
also may redo some glyphs in the future.
UPDATE: cyrillic done
Inspired by Briem Script.
I am very proud and happy that I have been awarded a staff pick starfish. ⭐️
Arabic is basic, only Arabic and Urdu are supported. Alternate samvat forms for 2, 3, and 5 digit years are in PUA. If you wanna remove the notch in the U+16AEC, then use U+E000.
Only lowercase Georgian mkhedruli is supported.
My ratings dropped from 9.10 to 8.57??? omg these trolls are ANNOYING
@AFontAbove No, this is Patrick.
Inspired by Interfacer. See also Zagato and Zagato Bold.
Looks like the Bauhaus style is trending on FS.
This is a cloneBOOTSHAUS — Geometric "Bauhaus"-inspired modernist sans
═══════════════════════════════════
Bootshaus is another endeavour into the Bauhaus realm of typography.
Focus for this font lies mainly within it's broad choice of glyph alternate forms to select from for stylish texts or logos.
Much of the extra glyph alternative forms are loosely based on the lettering by Sascha Lobe for the Bauhaus-Archiv
Many more glyph alternative forms are planned to be included, stay tuned..
— WIP
Cheers!
VON NEUHAUS — Geometric “Bauhaus”-inspired style
═══════════════════════════════════
This is the latest evolution of a “Bauhaus”-inspired constructivist style typeface design that originally started 5 years, or two font versions back.
To me personally this is a long awaited triumph, that has finally materialized after years worth of been haunted by this idea, and the crazy speculations about this ghost that would never be...
Well, that was untill now... So at last, I can now finally proudly present to you this latest of arrivals to come from this unforeseen series of typeface progressions.
This newborn addition is in fact the 3rd phase of this letter concept's evolution, and caused the font project to undergo a series of addaptations that graduatelly increasing the levels of sophistication possible by chaging it's internal structure and behaviour within the FontStruct-editor. This 3rd addaptation unlocks the FontStruct editor's “Expert Mode” full power potential.
Enabling all editor functionallity to provide the most versatile font creation capabilities available within FontStruct.
STF_BLAUHAUS was the font's very first version, created back in early 2019. It's the font's original concept as it innitially was first intended. It essentially started out as a personal study into the design of letters on a small grid. And more importantly, the creation of required composite bricks to do so.
The idea back then was to craft the most complex geometry possible without the use of any “Expert Mode” functionality whatsoever. Now, what this innitially did was still quite novel to me at that time, as this had led to the development of a FontStruction that was solely built from the extensive use of composite bricks. Not just a couple, but a staggering 272 composite bricks in total. Many of which in fact are quite intuitive and required certain amounts of careful thinkering with the maths found in it's geomtry to craft these custom brick compositions.
So as explained above, there was no use of any of FontStruct's “Expert Mode” functions. This meant that the option to nudge, flip or rotate any of the bricks wasn't available. Now this changes everything in respect to building complex fonts, since in order to get all the bits and pieces of a letter such as: crossbars, intersections, curves and corners properly aligned requires, a precisly fitting composite brick to be tailor-made. In terms of the FontStruct limitations, this cause the physical properties of FontStruct's brick composition tool to be fundamental as to how much complexity and refinement can be put into it's letter geometry. In other words this is fundamental as to how well crafted the design is going to look in the end, since there is no option to further manicure shape or form other than from within those bounds of the adjacent 16-brick-array grid squares of a selection for composition.
I've choosen to design the alphabet concept in this “Bauhaus”-inspired geometric style, simply because of the simplicity this style has in terms of its basic pure geometric forms. The final result became this simple and bold looking small grif display type with a “3-bricks” Em-size only.
but it had some crucial compromises that had to be made due to FontStruct's design limitations. Not terrible, but not quite perfect either.
One very important byproduct from this limitations as were described above was a huge collection of very intuitive custom brick compositions that offer seemless alignement and perfect fits, basically an extensive set of custom bricks that work in a very similar fashion as FontStruct's default “Connect” bricks.
Bringing us to the main reason for 2022's version of this font.
STF_BLAUHAUS (Plus) was the font's second version, and most recent state that it sat in for the last year, up till this now. In this 2022 version of the of this font design modification the FontStruct editor's “Expert Mode” functionality was introduced into the design. Hoping to further manicure some of these compromised critical area's in an attempt to see what refinements could be implemented to revise the 2019's original version.
Now that the option to nudge, flip or rotate bricks was available, new more complex geometric shapes suddenly became possible. This sparked an explosion of new characters and additional alternative forms. Although now the FontStruct editor got vastly more versatile and potent, it remained strongly limited by that still present 1:1 brick size filter setting. Nevertheless, this made possible a very substantial update of the older font, and allowed many new shaping capabilities.
STF_VON NEUHAUS is the 3rd and final evolition to have come from my earlier FontStruct endeavours; STF_BLAUHAUS and STF_BLAUHAUS (Plus)
This version basically saw the transition from a font only using 1:1 brick size filter into a font at 2:2 brick size filter settings to unlock all power potential of the FontStruct editor's “Expert Mode” functions.
I could now write another eqyually as long body of text, explaining what's new in this final version or which other improvements were made, or say about it whatever the hell I want, but I figure that the picture becomes even more apparent when simply comparing the 3 fonts from old to new, and see the evolution happening before your eyes.
Start with STF_BLAUHAUS, folowed by STF_BLAUHAUS (Plus), and witness the full glory of "next-level" FontStructing that made possible the last version STF_VON NEUHAUS.
I hope you like it,
Cheers
This is a clone of STF_BLAUHAUS (Plus)