STF_EIN BERLINER - Condensed geometric sans-serif typeface.
Inspired by the lettering seen on a variety of different Dutch and German street signs.
The simple and clean geometric letterforms provide this typeface with a strong legibility in both display & body style text.
(grid size 3,5 × 7 at 2x2 brick size filter)
Enjoy
STF_DERBY - Condensed Geometric Neo-Grotesk sans.
The idea was to make a typeface design that would suit small point size body style typography.
■ Multilingual support (94 languages)
■ Partial kerning WIP (8694 Pairs and counting)
==============================================
The fontstruction is a Faux Bezier style approach, to allow the most freedom in shaping the different letterforms and curves.
Font sample is best viewed at 2x pixel size or above for a sharp result.
I hope you like it!
DIDUDE (Condensed) ― Contemporary Neo-classical "Didone" style serif
════════════════════════════════════
The idea revolved around the basic concept for 'Didone'-style typefaces.
A genre characterized by modern unornamented standard letterforms, which was very popular for general-purpose printing during the 19th century. DIDUDE is by no means an attempt to embarge on a quest trying to deliver a conceptual overhaul of this genre. Its main goal was to achieve greater simplicity, without sacrificing that traditional neo-classical personality. Instead of leaning towards the typically more 'Humanist'-influenced style with distinct stroke modulations and proportional forms, geometry and symmetry were introduced to design this more simplified take on the traditional historical style. It has been crafted with a structural logic of its own.
"Less human, more geometry.."A fusion of geometry and neo-classical elements that blends the past with the present.
━━━━━━━━━━━━━━━━━━━━━━━━━━
Main distinctive features for DIDUDE (Condensed) are:
Tall and narrow letterforms with short unbracketed serifs, vertical orientation of weight axes with a strong contrast between thick and thin strokes, slightly squarish-shaped round characters and its emphasized business-like nature. So the majority of important characteristics that distinguish the neo-classical style have been incorporated.
Certain features that were implemented into DIDUDE's design are somewhat setting it apart from most other, more traditional typefaces in this genre, and most notable is the more relaxed contrast ratio that was choosen for this particular project.
Further personalizing touches were made to stroke endings and curve geometry, providing slight 'calligraphy'-inspired decorative variation with occasional spurs, breaks, curved finials and plain monolinear terminals.
Topping it all off with an ever so gentle height deviation that sparks a subtle rhythm to any line of text. Last but not least, most of the optical clunkiness was addressed and either corrected or compensated.
There is a large character set that includes a little bit of everything:
Basic latin character set, latin-1 supplement set, stylistic ligatures and glyph alternatives, punctuation marks, lining and non-lining text figures, roman numerals, (Partial) Greek and Cyrillic, also numerous non-lingual technical, mathematical and decorative stuff was included.
Only partially kerning for now and this remains a WIP.
Nonetheless, I hope y'all like it so far..
━━━━━━━━━━━━━━━━━━━━━━━━━━
Here is a link to the other font style in this typeface family:
STF DIDUDE (Regular)
Cheers
ZEPHTON (Pro) — 70's future retro / sci-fi style typeface
═══════════════════════════════════
[ INTRODUCTION ]
A revival of the Sci-Fi lettering used by the “Atlantic Toy Company” for their “Galaxy Serie”. A science fiction themed toy line that was manifactured from 1978 to the early 1980s.
The lettering seen on their packeging uses a modified and filled version of a typeface called Paperclip Contour, which was designed by Dutch graphic designer Ad Werner, and was issued by Mecanorma in 1973. There is very little information provided on the web in regard to the original typeface by Werner. And even fewer images. Nothing that show a complete character set, only FontInUse submissions. But taken from the research I conducted I can safely conclude that the original Paperclip Contour typeface has just one style, which is outlined, and that it includes a lower case(a-z) letterset with numerals and just a had full of symbols and punctuation.
That being said, this actually is the second revision I did for the lettering. The innitial first version had a super basic character set, as well as a couple of mistakes included alongside some compromises in respect to certain glyphs. This was due to the limited knowledge I had in regard to the use of the FS-editor at that time. So the font wasn't 100% accurate. This newer version correct most of the inconsistencies that were present in the older version.
Due to the incomplete resource material on the original Paperclip Contour by Werner I can't check accuracy of this newer version. But I think that apart from the thicker weight in Zephton its 99% accurate.
Where the older version ran short by a lot, this new revision in fact can qualify as a full font, with everything from numerals, symbols, puntuation marks as well as accented letters for more Latin languages. And ever some glyph alternatives. Making this much more of a functional font.
[ THE FONTSTRUCTION ]
The font is a “Unicase” style typeface that has only “Minuscules” included. There are glyph alternate forms for several letters as well as a secondary set of numeral figures. These characters are located in the Unicode blocks for “Halfwidth And Fullwidth Forms” and “Private Use Area 1”
There is also a full (a-z, 0-9) alphanumeric set with “Contour Outlined” glyph alternative forms, which is located in the “Private Use Area 2”
The font saw a major update that tied everything together, and sort of finalizes the font for proper use.
Several characters have received minor adjustments in order to find a balanced harmonic distribution of typeset material. Also several improvements have been made to the overall shape and form of various characters. In addition to that numerous new characters been designed, expanding the character set even further.
Work also continued in the metric department, building the kerning table, that contains 2368 stored kerning pairs so far. Spacing was reduced by 50% to tighten the letter fit significantly. To round things up and convert it into a more functional typeface some of the characters were rearranged and/or relocated to different Unicode blocks.
═══════════════════════════════════
[ CONTOUR OUTLINED GLYPH ALTERNATIVE FORMS ]
The contour outline glyph alternative forms are not 100% accurate conversions of their solid counterparts. This due to minor design difficulties that simply made it impossible to fully execute it at its current size and with this thin stroke weight. The deformities are simply the result of a lack in fully smoothened stroke contours in some of the transitions from diagonal to curved parts. These flaws are minute, and mostly only noticable at large size rendering, but nonetheless present. In small to medium size text these imperfections are hardly visible, and pose no real problem. Anyway.. the contour outlined glyphs are still very close approximations nonetheless, just so that it happens to be with a small number of tiny imperfections.
As a direct result of this the two sets with glyphs do not fully match and therefor not seemlessly overlap.
This can be ignored for most part in the majority of the font's application, but it does create two important limitations:
1) Contour outlined glyphs are unsuitable for vector path outline rendering when the stroke alignment is set to "Outside" (Configured like that with threshold for the corner point angle set to sharp these imperfections in the glyph contours can generate spikey disruptions to appear in the stroke rendering).
— So this configuration should be avoided.
2) The two styles are unsuitable (or incompatible) with stacked “multi-layer" overlay text compositions.
— Simply due to the fact the two variations aren't a 100% true match.
They do on the other hand, combine perfectly side-by-side in text composition.
═══════════════════════════════════
[ MORE LIKE THIS ]
There is also this other FontStruction that was inspired by Ad Werner's font Paperclip Contour, called Neue Werner Paperclip, this one was crafted by fellow memberfunk_king
Thats it for now...
Cheers
This is a cloneBACK TO THE FRAKTUR - Modular geometric calligraphic blackletter
============================================
Calligraphy inspired design, that even though it's name can be deceptive, suggesting one in thinking it is a Fraktur derivative. Which is actually quite not the case, and as far as being a calligraphic Blackletter inspired work, the similarities between the two stop.
This is a heavily simplified and geometric take on the calligraphic style, with much more modernized letterforms as well.
It remains a WIP, but I'd love to hear what u think so far.
Cheers