3351021
Published: 23rd August, 2009
Last edited: 14th September, 2009
Created: 23rd August, 2009
I am on the quest to create a modern widely usable font, with an interresting difference. The first stage of this journey began with my wild font "convention", inspired by the shapes of letterforms, found within architectural environments. The second stage of this process was where i created a font called "rebuild", where i have tried to tame the form from my font "convention". In this third font, i have made further drastic changes, to decide on these forms, and create a small font family called "New Build".This is a clone
301071
Published: 8th July, 2013
Last edited: 8th July, 2013
Created: 8th July, 2013
A rather elegant curving font, mostly using only half-bricks. Finally finished, although I am still making improvements.
2031172
Published: 8th September, 2009
Last edited: 8th September, 2009
Created: 7th September, 2009
Some experimants in reflection, with this new addition to the family "NewBuild". Numerals and other glyphs are soon to comeThis is a clone of Newbuild
2541033
Published: 24th August, 2009
Last edited: 28th August, 2009
Created: 23rd August, 2009
A modular addition to my font family "Newbuild".This is a clone
1420983
Published: 9th March, 2013
Last edited: 13th March, 2013
Created: 9th March, 2013
Biggest font I've made.
Work in progress.
Need ideas for how to include "s" since I used thick lines by mistake.
2021014
Published: 22nd August, 2009
Last edited: 28th August, 2009
Created: 21st August, 2009
I am on the quest to create a modern widely usable font, with an interresting difference. The first stage of this journey began with my wild font "convention", inspired by the shapes of letterforms, found within architectural environments. The second stage of this process was where i created a font called "rebuild", where i have tried to tame the form from my font "convention". In this third font, i have made further drastic changes, to decide on these forms. Using these forms, i now intend to create a small font family called "new build"!This is a clone of Newbuild (demi)
113304
Published: 3rd June, 2013
Last edited: 3rd June, 2013
Created: 2nd June, 2013
This will be a family called FS 10th. It's under development at the moment. Caps are done.
264574
Published: 1st June, 2013
Last edited: 2nd June, 2013
Created: 1st June, 2013
This is a macaroni based font I made in bezier. If this has already been done in bezier, forgive me.
305424
Published: 9th May, 2013
Last edited: 12th May, 2013
Created: 8th May, 2013
A bold font idea I pulled from my previous font FS Reprint. It's in bezier.
46414
Published: 23rd February, 2014
Last edited: 12th January, 2019
Created: 13th February, 2014
Now THIS...
~Took a couple days to create, although I've delayed it quite a lot. It's not going to include lowercase, considering it's a capped font.
414924
Published: 7th August, 2013
Last edited: 11th November, 2013
Created: 7th August, 2013
This is a modern font. The bezier curves were made by me. 1x1 filters. I will probably sell it somewhere later.
@FTL Then why did p2pnut sell all modular fonts? Anyway, off to fix the v and w. @FTL I probably smooth it with "Glyphs." Can someone help? BOOM! There goes pre-made composites.
305555
Published: 27th June, 2013
Last edited: 29th June, 2013
Created: 26th June, 2013
A small idea of mine. Very thin strokes on a large grid scale. Made from scratch and mind.
13195
Published: 27th February, 2014
Last edited: 28th February, 2014
Created: 18th November, 2013
Just experimenting with some curves. I'm liking the results of it so far.
1961016
Published: 20th August, 2009
Last edited: 28th August, 2009
Created: 20th August, 2009
The first of my font family "New Build". Inspired by my typeface "convention", i am looking to create a modern, architectural feel, with an interesting difference. More wieghts and measures are in the pipeline, although this has taken a lot of patience!This is a clone
3011067
Published: 5th December, 2010
Last edited: 8th December, 2010
Created: 5th December, 2010
This version of Global Village is also designed for the use in an E-book I am beginning working on as part of a third year university Graphic Design project.
This version shows how the typeface has been constructed as the individual bricks are slightly seperated from one another.This is a clone of Global village
134307
Published: 3rd June, 2013
Last edited: 6th June, 2013
Created: 3rd June, 2013
A vertically thicker version of FS 10th.This is a clone of FS 10th
257207
Published: 5th May, 2013
Last edited: 6th May, 2013
Created: 26th April, 2013
This is a very complex WIP of lowercase characters in a funky format.
193538
Published: 9th December, 2011
Last edited: 20th December, 2011
Created: 27th October, 2011
Font inspired by Bézier control points found in vector graphic software such as Adobe Illustrator and Inkscape.
The irony is in the brick-based construction of Fontstructing, but I had lots of fun nonetheless.
This set will be further developed though - any and all feedback are welcome :D