Searching for more “Rounded” fonts?
Buy and download “Rounded” fonts at MyFonts.
This font is a not too curious case. It comes after trying to prove to myself (with a high percentage of satisfaction, but not quite yet) that FS can allow me to create pro-looking fonts. I am thinking, for example, of zerena, zchreibengroß, zimmera, zenando, zenantoo, zanze, zinckel and others like that. Every time I finish a font that has taken me a long time to complete, I feel the need to look back and do something more relaxed and simple. Thus, without any pretense but feeling fun and friendly, zikiya was born. Hope you like it.
A YouTube user named, Willow Rolfe, So it's time to make a typeface for real.
Here is a gift to the community.
-----------------------------------------
This is a collection with parts and bits for small grid designs, (5x5 max) Each related to the assembly of smooth and (near) Bézier-like curved shapes and round letterforms.
-----------------------------------------
As some of you might very well know, one of FontStruct's holy grail is custom circular and curved forms. I'm talking about those not simply build with off-the-shelf bricks from the standard brick pallet FontStruct is providing.
Making these can be a very difficult process. Since the bricks in the default pallet are a far cry from what is truly possible with some clever use of FontStruct's editor features. Although obviously there remain serious limitations when it comes down to making different curves and round forms, there still is a lot room available to work in.
Most of the seasoned users know and utilize this very well, but, as with each of us, it took time and dedication in order to learn the tricks of the trade!
With a little knowledge, clever thinking and a healthy dose of outside the box thinking one can still get a lot out of FontStruct.
This font is meant to serve as a helping hand and inspirational / educative tool. Providing some insight into making numerous curving and rounded forms, various transitions, achieving different weight contrasts, and how all the various building blocks were aligned in order to make the various parts.
-----------------------------------------
Most important features used for this process are:
Brick Size filter: Must be changed to a 2×2 value in order to use the elements in this font.
All functions found in the "Modify" menu: Flip rotation and nudge are used to make alignments and to fill up the gaps.
Make composite: (also found in the Modify menu) This function will mainly be used to do two tasks, resize, modify/distort brick shape,
placement and orientation of bricks within the brick grid square for the required given composite.
-----------------------------------------
The font itself contains a collection of different premade elements divided into 3 main groups that I will list bellow. And can be found in the uppercase, lowercase and numerals sections.
[Uppercase] Various pre-assembled variations of the letter O, to demonstrate different variations for a round letterform. These were sub-divided and grouped according to their relative height!
[Lowercase] "Copy & Paste"-ready isolated parts 'n bits (curve segments, terminals) aimed at re-constructing and use in your own projects
[Numerals] Various random examples of letters that have curved/round features implemented in some way.
A fonts height probably is the most dictating parameter in type design in terms of behavior and appearance. Therefor, with the collection of pre-build vatiations of the letter "O", I choose its relative height to further sub-divide them in, rather than weight, since these are already completed letterforms. This makes up for the easiest access to a "drag/drop" adaptation into one's own project and build a full font based upon it, mainly for those that come with only limited experience.
This tool is to make one's FontStuct experience a little easier or to save time. So feel free to clone it and use the content however you like.
Re-use any of the provided elements, copy/paste the letter examples into your own fonts, deconstruct and re-use the various parts. Or simply just take a peek under the hood to see how they were build, This can be done via the "Menu>View>'Outline' " function.
There are no restrictions to how the content is used.
-----------------------------------------
More additional curve variations and different related other elements will be added soon. I have to select them from my various random works and this takes some time. Please stick with me on this one.
The intent is to try keeping this a ongoing project, so hopefully many more updates will follow and eventually turn this into a "all-in-one" tool for small grid designs. So far I also have plans for including a collection with different serif style, but this is something for a future update as well!
For now, curvatures it is!
-----------------------------------------
Note that, all content and forms in this font were created by myself and were gather from the various projects I have made, most came from published works, but some were taken from private material as well. We all here work with the same tool + limited brick set, so I am pretty sure certain elements in here were done exactly the same way by other users. Please don't accuse me of using others or your material without approval, this is just a case of unfortunate coincidence.
-----------------------------------------
[Usage]
The elements are best used by way of copying them from this into your personal projects, and work with it from there! This because the "My Bricks" pallet in this font is messy, probably very uncomfortable to work with as is. Copy & pasting them into your own font re-arranges the selected brick set for that segment into your own font's "My Bricks" pallet, making it much easier to get sense of its individual bricks.
Another very important thing is, I strongly advice not to nudge any of these what so ever, unless investigated its composition first. And I cannot rephrase this enough, seriously, never, or brace yourself for absolute dire results!
This due to the numerous counter-rotated or different directions of nudged 'into place' elements that make up a complete segment.
There are some elements included that at first seems to be looking like doubles, with onother one looking exactly the same. This is right, but these are constructed using different configurations of bricks. The reason for this is to provide alternative configurations for them. Some scenario's can make one approach to be working just fine, and the other simply not. This all hangs in strong correlation with the current nearby configuration of bricks, and simply depends on the whatever spot still remains unused in the surrounding grid. Since available grid locations to start working from are usually very limited. Its like this, Taller and/or wider letterforms meaning more available space to work from and place your bricks, but the smaller you go, the more scarce space becomes, simple as that.
So best is to use and work with this tool on a copy of your current glyph to verify no bricks will be raplaced and ruin the current glyps, and only to replace the original glyph once you're absolutely sure everything worked out well together.
If something else isn't clear or if you have any questions in regard to this tool, feel free to ask those in the comment section bellow.
-----------------------------------------
One final thing, beware that some of this elements can possibly influence the font vertical metrics (font size and leading/vertical spacing) and create addition extra line spacing. As well as the letter width. So be sure to allways double check those two when u use any of this.
-----------------------------------------
PS: My apologies for the "too much" of a explanation above, lol.
Happy structing,
cheers
After so many years, thanks to the amazing nudge feature it's been finally possible for me to recreate Mionta, my 2010 SportsComp entry, the way it should be. No awkward faux-Bézier this time around! It was very fun and a bit challenging to arrange all the bricks together so that they form 16 times smaller versions of the original characters. I did alter some letters and characters however. The ampersand was especially ugly in the original version. I also changed the look of the period (as well as the dots in colon and semicolon respectively). The positioning of left and right quotation marks was my conscious choice, it's a bit more aesthetically appealing to me that way. Double quotation marks are also sort of more ornamental and can serve a purely decorative purpose (this is also why "<" and ">" look the way they look - similar idea). And the percent sign, I love it so much that I think I'm going to marry it. Due to FontStruct's limitations, diagonal lines in K and N couldn't be preserved. Also, tracking isn't as tight, because we can't go below -1, but I think it's a good thing in this case. Just like before - make sure to try out fake italics! More fonts to come in very near future. Changelog: - minor corrections - & was still a little bit off - bar in lowercase t is now a bit raised ^and that renders the sample picture outdated, fantastic.
This is a clone of MiontaAn old updated idea: overlapping glyphs. Now with the new layers, here you are. See also zupra 3D eYe/FS.
This is a clone of zupra 3D eYe/FSAnother "little" font: only 1,5 bricks x-height (2 bricks for the upercase) with 2:2 filters. Inspired -just only the rounded aspect- by the great Frankfurter font, whose original (heavy) weight was designed by Bob Newman in the Letraset studio and issued in 1970. In 1978, Medium (the only style to include a lowercase, by Alan Meeks) and Highlight (by Nick Beishaw) were added. Inline (by Studio) followed in 1981. Our well know FSr escaphandro build Choripán, an excellent actualization of the classic font. BTW, my accents and other few glyphs must be improved. WIP.
I went and mangled Spelunker by Zephram. I am messing with the shapes of the spaces between the letters. The name of the font indicates that most of the letters are wearing bell bottoms.
This is a clone of SpelunkerBlack and rounded display font. Made with 2:2 filters, x height = 2 bricks (yes, truly), UC height = 2,5 bricks, and descenders = 0,5 brick. Plus: "ff" and "tt" ligatures placed at the "fi" and "fl" glyphs, and a lot of kern done but more in progress. Enjoy, please.
PS: Thanks to @Sed4tives for his continuous, selfless and very helpful help on improving this font. I'm in debt, compa!
I wondered what a plain version of Candylander would look like, so I made this. :D
I think a fully half-arc version could look even more stylish than this! Hope to find time to create one soon. (EDIT: Done, see Migrator)
This is a clone of CandylanderExperimental brush/pen thing. Has a slightly spooky look. Because of their tapering curves, many glyphs can render with a "split" or "stencil" look about them. This is due to software-imposed limitations on vector rendering. Designs which share this property can be considered Pseudostencils.
This design is not informed or inspired by any existing typographical traditions. I set out to make the "claw" bricks (as I call them) into a font and this is the result.
*
Inspired by the works of regular_one. Unlike most fonts I've released recently, many of the glyphs had to be modified or even redone from scratch.
- M, W, m, w, @, #, %, <, >, ~, and the circumflex above accented letters were all too wide and had to be condensed;
- I, f, i, j, l, r, and t were all too narrow and were expanded a bit, mostly through the careful application of serifs;
- K, M, W, X, Y, v, w, y, 7, /, and \ all had ugly mixes of angles that needed to be redesigned;
- N, *, (, and ) were completely redesigned, and many more touched up, to fit better with the rest of the font.
Most of the edits made were not possible before nudging. It's still not perfect, but it's much better than it was before, and I'm proud of how much it has "grown up". Of course, suggestions and critiques are encouraged. Thanks and enjoy!