Musician/Type designer/Mashup artist
• BANDCAMP / My music
• MY "JURRIAAN SCHROFER" SERIES
Tools for font testing
Personal URL | https://www.behance.net/Sed4tives |
Fontstructing since | 1st December, 2017 |
Fontstructions | 365 shared, 79 staff picks |
Shared Glyphs | 59239 |
Downloads | 14012 downloads made of this designer’s work |
Comments Made | 2770 |
====[ EDUCATIVE INTRO ]====
At a time when making books was a very time-consuming and labor-intensive process, an increasingly literate 12th-century Europe required more and more books. To keep up with the increasing demand for the spread of literature was a ongoing struggle. Writing materials such as inks, dyes and parchment were very expensive. And it wasn't until the 15th century, when parchment was largely replaced by paper, along with the arrival of the printing press, for it to gradually became cheaper, faster and less labor-intensive.
So it made perfect sense to find other ways to help with this process.
Simplifying a script and cutting back on the decorative calligraphy was the most effective way of doing this.
This led to the development of simplified variations to pre-existing bookhand scripts. One of such forms is littera textualis, categorizing within the Textualis/Textura or simply Gothic bookhand scripts group.
Littera textualis is the simplest and least calligraphic form of textualis. It was developed with just two main goals in mind, to save time and costs. The simplified letterforms could be written much quicker than the more calligraphic and luxurious variations. It offered a more cost effective and faster version to the script. It was often used for less important literary works and academic papers.
It functioned as the standard bookhand script in the Netherlands during the 14th & 15th centuries.
====[ ABOUT THIS FONT ]====
TEXTUALIS BATAVICUM - A calligraphic inspired Blackletter/Gothic bookhand script. Essentially a Textualis/Textura inspired work.
The design mainly follows the concept for a traditional form of littera textualis bookhand script as was described in the intro written above.
It remains a work in progress and I will add update info for this font in the comment section bellow.
Some character still need slight adjustments, but so far I am very pleased with the result. As you can probably notice, the uppercase characters have slight more weight than the lowercase has.
More characters follow soon.
I hope y'all like it
Isometric 3D outline style typeface.
The glyph have a exact copy slighly elevated and to the right of its original which I then connected with eachother to create the box-like three-dimensional idea.
Because of some serious design difficulties it remains far from complete, but I am kind of done with it for now due to this. For now only support for uppercase, no numerals and very limited punctuations. I think I fully kerned it, or at least everything that is important. On last thing I need to mention, the smallest open spaces doesn't allow this font to work in very small size. These will look filled at smaller point size.
I'm not sure if I will ever try another attempt to finish it at a later stage. (who will tell..) ;)
But I think what I've got so far is too cool for not publishing it. So for now it would do just fine as a logotype or for a decorative usage but not much else.
Enjoy!
This is a cloneLITERA FACILIOR GOTI ― A 'Blackletter' script style with a twist
════════════════════════════════════
Also known as Gothic script, Gothic Minuscule, or Textura, was a script used throughout Western Europe from approx. the 12th untill the 17th century.
This FontStruction was aimed at mimicing the aesthetic approach of a ― ‘Textura’ variant of the Gothic Minuscule script style, more accuratly refered to as ‘Littera Textualis’. This style is most characterized by its strong sturdy letterforms, with distinguishing sharp, straight and angular features as oposed to the other variations in this catagory.
In terms of authenticity to the original predecessing formal script family, my ‘Litera Facilior Goti’ didn't took a whole lot of care for authenticity. The idea was to take a more independent and experimental approach to shaping the letters and forms, so it wasn't necessarily inspired by any specific typeface in particular, it rather recycles certain characteristics of a ‘Textualis Quadrata’, but beyond those aspects of general guidelines it evolved on its own.
Some of the areas where the design tends to really stray away from the tradition is for example the serifs:
It's often that I have some trouble with the weight ratio distribution of serifs and such elements in simplified modular based geometric Blackletter fonts. In many of such designs they tend to have been left pretty static and equal in thickness throughout the full character set. Which I think is often either having some letters look clumsy or even weird, and generally speaking also often making them appear too thick.
So this was one of the things I had to try and adress, I experimented a little with the style and forms of the serifs. Eventually this resulted in multiple deviations in variety to mix and create a more dynamic distribution. similar to what was done in less formal scripts. Over time they became ever further simplified, letterforms that involved less reorientation of the pen, in pursuit of styles that were quicker to write.
But taken as a whole typeface I find that it is having this certain ‘random-ish’ characteristic that is simply working for the better of these particular style fonts.
I'm still working on improving its overall rhymes and reasons to a certain point that is acceptable, balanced and with enough consistency. But up to this stage I personally think that the concept worked out quite successfully so far. And that even despite the fact that its stripped down of most ornamental decorative calligraphic extravaganza, it still managed to capture a convincing portion of that ‘Medieval ’ looks and personal flavour.
But I think that in the end this became a pretty neat looking font and it would classify somewhere between a hybrid mix of simplified Blacklettering and a drunken man's ‘Textualis’.
════════════════════════════════════
― No filters used!
Cheers!
This is a cloneELEVATED (REWORK) - A 3D outline display typeface design with shadow effect.
It's inspired by the lettering from a sketch by great Dutch graphical designer "Jurriaan Schrofer".
===========================================================
This re-work differs from Jurriaan's original sketch and my previous versions.
I changed the size to grid ratio, drastically reducing overall glyph size and increase stroke weight. The changes are optimizing the design, making it more suitable for digital display use. (more accurate 'print' version forthcoming).
===========================================================
Due to the inexperience I had in my early days of FontStructing, and the lack of proper knowledge about raster scaling, I faced some serious issues regarding the correct size distribution. This made it impossible to include the diagonal lines correctly into that old version of the font, with the diagonals also having equal seporation and white space throughout the entire design.
So instead of making a clone of my previously published version "STF_ELEVATED" in order to include the shadow style variation into that existing family as a seporate FontStruction (like I did with most other style variations in my "LETTERS OP MAAT" series), for this one I decided to rebuild the entire typeface from scratch.
Putting all the style variations together into this single re-worked design.
Some extra characters were added to the set, making it a slightly more functional basic font.
===========================================================
The shadow effect is the default style for this font, this also includes all numerals, punctuation marks and other symbols that make up the full font, these occupy the uppercase. The outline style A-Z glyphs occupy the lowercase.
Enjoy!
ALIEN WORMHOLE (BOLD) - Monolinear Sci-Fi-inspired 'worm' typeface.
═════════════════════════════════════
This is a 'Bold' style version to the "ALIEN WORMHOLE" type family.
This version has a ton of extra character compared to the 'Light' version.
For now only the two 'Basic Latin' sets, some symbols and a small number of puctuation marks match. And it remains to be seen if I can translate back to the Light version all those extra's that were put into this Bold version.
I mentioned 'type family' earlier, but in reality there isn't a whole lot of family just yet. Since the two for now hardly correlate truly.
═════════════════════════════════════
Here is a link to the 'Light' version
═════════════════════════════════════
Stay tuned for future updates.
Cheers
STF GROOTESK Pro ― Contemporary geometric grotesque
═════════════════════════
A clean and geometric grotesque sans-serif typeface that is equipped with tons of extended professional editorial typographic features,
such as:
Multilingual support in 3 script writing systems for 113 languages, glyph alternative forms, stylistic ligatures, accents and punctuation marks, symbols, technical, ordinal, pictographs, additional dingbats.
15164 stored kerning-pair and many other professional features!
━━━━━━━━━━━━━━━━━━━━━━
[ TECHNICAL ]
■ Metrics(in square grid units)
5.0-Em / 0.5-Stroke
2.0 : 2.0-Brick Size Filter
Em-Square: 5.0
Cap-Height: 3.25
X-Height: 2.0
Ascent: 0.875
Descent: 1.0
Overshoots: 2 × 0.0625 Top/Bottom - (uppercase only)
━━━━━━━━━━━━━━━━━━━━━━
■ [ ADDITIONAL EXTRA IMPORTANT RELEASE NOTES ]
Previously published as a (non-Pro)-version with the same name.
But when that version eventually corrupted, it rendered it useless.
And after several repair attempts the innitial isolated "FS-editor" native
brick corruption eventually was fixed! But from this point onward all theFontStruct-generated-*.TTF-files downloaded from this particular FontStruction delivered a broken TrueType-font file, that upon its installation process resulted in having a error. Leaving me, or anyone for that matter who had downloaded it, unable to get it or its updates installed.
So after unsuccesfull struggling for a while I noticed that the cloned version didn't generate a broken *.TTF-file. So I decided to terminated the original FontStruction and delete it.
━━━━━━━━━━━━━━━━━━━━━━
■ [ DESIGN INFORMATION ]
The main inspiration came from those early to mid-20th century geometric grotesques, and visual environment of that era.
Although the characters were mostly geometrically constructed, and remain as close as possible to basic geometry, "STF GROOTESK Pro" includes a blend of stylish hints of hand-crafted lettering influences and intentional irregularities in order to tribute those classical geometric designs.
For extra additional emphasis the design tries to take advantage of a rather unusual vertical Uc>Lc proportion, with ascender parts of the 'Lc' characters sitting well bellow the cap-height, making the 'Uc' appear strikingly taller in comparison. Essentially providing the uppercase with a more "Condensed" feel. Some of the other characteristics of the design are it's sturdy and stylish yet clean presence, with little to no contrast, and it comes in bold style only. But to compensate for the lack of extra weight versions there was some serious time invested into additional testing and optimizing the entire typeface. So it is super well mastered and therefor extremely versatile.
That being said..
Looks can be deceptive at quick first glance, and this indeed might appear as being a very basic looking design. Even though this in fact is far from being just that other basic looking display sans, nor your next boring geometric grotesque!
From a FontStructor-perspective point-of-view I recommend to take a more ‘close-up’ view of the design's finer details. This creates a better understanding and greater appreciation for the extreme level of complexity that is present in both form and function.
Zooming-in on some of the letters would reveal the font's subtle, yet nuanced diversity of that 'previously' hidden underlying personal characteristics that usually remain invisible in text format at smaller point size. Now suddenly just its overall care for finer detail and overall quality within every bit of the design, the tons of custom shaping, stroke transitions and additional smoothing will gradually emerge as zoom levels get ever deeper. At its deepest level it will even shed some light on the surgical stuff that mostly works invisibly and without the awareness of its reader.
A display typeface at it's core, still it performs equally great in very small body-print text or web design application, as it does too in larger format for headings, ads or branding.
Thus providing, this very function efficient and reliable work-horse,
a truly genuine "one style fits all" typeface powerhouse.
And there its no question whether this could hand out "a 'one-punch' K.O." of a Headliner, thats obvious. But this unyielding bumpy behemoth just as well takes u for the long run, effortlessly telling you fascinating stories.
Especially well cared for optimized rendering on a computer display device, and deliver simple yet versatile seemless digital typeset material.
━━━━━━━━━━━━━━━━━━━━━━
■ [ SPECIAL NOTE ]
A big thanks and 50% of the design credits for the lowercase 's' go out to elmoyenique
━━━━━━━━━━━━━━━━━━━━━━
■ [ "Pro" VERSION EXTRA'S ]
The new "Pro" version update for GROOTESK utilizes several TrueType smart-font features and control characters to map two or more glyphs for combining glyph composition.
INNERCITY — Geometric future retro display grotesque
════════════════════════════════════
Geometric unicase display sans with a stylistic filled counter-like (Uc) set and monolinear 'bare-boned' geometric grotesque (Lc) set.
— Full alphanumeric dual-variant font !!
════════════════════════════════════
Elmoyenique's "zenzura" (a very stylish work in it's own right, make sure to check that one as well) anyway,
His 'zenzura' font kind of struck me with a healthy fresh dose of motivation. In the past I've explored somewhat similar style designs, but none of those ever really got consolidated into the extensive and complete work Elmo delivered with his stunning zenzura.
So I decided to dig up one of my older such projects and see if this new motivational boost could turn 'half'-a-font into a complete piece.
Long story short, this update is the result of that venture.
════════════════════════════════════
Where previously this project came in just one style (filled counters), with no additional glyph alternates. Basically a complete absense of the lowercase-string all together, and only very limited complementary set of symbols and punctuation marks were present. Neither did the previous version had a great deal of refinement in terms of metrics / kerning and overall horizontal distribution of type-set material. So, it was nothing more than a plain doodle of the idea I had back then, that had to be preserved for a later stage.
But being drawn into more recent projects at the time I eventually ren dry on motivation to fully finalize this I ended up publishing it in its rough state.
════════════════════════════════════
ABOUT THE UPDATE:
The'bare-boned' lowercase is a somewhat futuristic geometric looking form, whereas the filled uppercase set has a strong retro vibe.
Combined in 'mixed-case' it can make a cool optional decorative style capitalization for your text. Used in isolation the two styles (Uc, Lc) both could be used as two seporate fonts, allowing stylistic text hierarchy.
In addition to the stylish retro-like, and partially filled forms I included a glyph-alternative set that strips the letterforms down to their monolinear core-geometric essence.
The design of this set is characterized by the spacious, sharp and clear appearance, that looks slightly futuristic but fashionable still.
With this new addition being the more legible and clean form of the two style sets, I placed this variation into the lowercase-string, making this the default-style for the font.
For the numerals, symbols and punctuations, I tried to remain committed to the stylish filled nature of the uppercase set.
A full alternative monolinear and 'bare-boned' numeral counterpart is located in the 'Full Width' Unicode block. Two extra weight variations for the brackets are also included for a more precise personal preference..
— And so it finally could respectably considered being a full font after all.
Thats all folks.. Enjoy !
cheers
This is a cloneSANS SERIFSCO — Humanist / Neo-Grotesque Sans-Serif
A contemporary neo-grotesque sans-serif design with regular weight.
I tried to add subtle diverse and nuanced visual elegance while still remaining minimalistic. Most significant feature is the subtle stroke modulations, distinguishing this from a more geometric style.
Designed to be versatile and suitable for a wide range of different purposes and optimized for legibility in small point size body copy.
The font was constructed on a large grid using linear interpolation (also known as faux-Bézier method). This allowed the most freedom for constructing more complex custom forms, curvatures and all the various stroke modulations.
The font has a total vertical height of 88 square grid units, this is including all optical compensations, ascends / descends and accents.
LUCERNA — Neoclassical stencil serif
════════════════════════════════════
Lucerna is a modern neoclassical stencil serif in the Didot style.
Simple & Elegant...
════════════════════════════════════
Created primarily with the focus towards luxury fashion and marketing brand-oriented projects, aiming at luxurious and sophisticated design projects.
Although it’s a true and fully functional stencil, design focus wasn’t so much
concentrated around the 'functionality' part of the stencil concept. Instead it was more focussed on the stylish implementation of the concept and on making sure it looks pretty.
The stencil concept was achieved by way of stroke omissions. Some of which are large and drastic, leaving only critical parts of the stroke intact, while others are more subtle, like those detached crossbars or cuts seen in the hairlines.
Thin transitional bracketed serifs and a mixture of various sized teardrop- and pointy terminals, combined with the high stroke contrast, these make up for a sharp and interesting looking font that provokes this thoughtful stencil letter concept.
There is a lot of subtle dynamic height deviations going on, hoping to tune in to more of a lively rhythm, and introduce some playful characteristic properties.
Minute changes to optimize optical performance have also been implemented, such as overshoots. The relative low cap-height makes up for a somewhat short and stocky uppercase quality. Its accompanied by a relatively tall x-height that results in a fairly large lowercase size. Due to the lower cap-height of the font, the short ascenders parts of the lowercase letters still exceed above the Cap-Line, preserving some of that otherwise lost white space, improving legibility.
The design's missing segments and various random detached bits 'n pieces aren't as functional in smaller sizes. Making it harder to read or distinguish detached letter elements from puntuation marks. So it is best used for display purpose.
════════════════════════════════════
A small number of glyph alternative forms are included as well:
• 2 forms of lowercase letter a:Single-storey and double-storey (default).
• 2 forms of upper- and lowercase letters Ss:Pointy terminals (default) and teardrop terminals.
• 2 forms of upper- and lowercase letter Tt: Uppercase letter T has two variations of pointy terminals, normal angled and extra angular. Lowercase letter t has alternative form with teardrop shaped terminal to use at the end of words, and can add a slightly more stylish look. The default version has better proportional width with just a small non-decorative curved terminal, this default form has smaller width for a improved horizontal text advance.
• 4 forms for lowercase letter g:Just 3 additional extra slightly alternate forms.
• 5 forms for lowercase letter f:Bracketed (default), curved, teardrop narrow, teardrop extra narrow, teardrop wide.
• Extra set of Copyright symbols:Cap-height size and x-height size.
• 5 forms of Pilcrow symbols:Just 4 additional extra alternate forms.
════════════════════════════════════
It covers most basic Latin languages, 65 in total so far.
Several symbols and punctuation marks are included. (probably more later)
I hope you like it so far,
Cheers
This is a cloneSTF_EIN BERLINER - Condensed geometric sans-serif typeface.
Inspired by the lettering seen on a variety of different Dutch and German street signs.
The simple and clean geometric letterforms provide this typeface with a strong legibility in both display & body style text.
(grid size 3,5 × 7 at 2x2 brick size filter)
Enjoy
FAKOS VARYTITAS - Futuristic Sci-Fi stencil design
═════════════════════════
A Stencil letter with a rather unorthodox form.
The main concept is that of the Sci-Fi / Tech aesthetic. But the asymmetrics in its geometry, various custom build curves and incisions somewhat tune down the mechanical geometric tone of the letterforms, and introducing a slight more humanized touch to its rhythm. These non-traditional attributes making this more of a novel stencil typeface with a strong personality.
The typeface was inspired by space age tech. Its a display style font that is perfect for when your project has to have that typical techy or futuristic aesthetic look. Its best used at large size, but it does work in smaller size format as well.
The font includes:
• uppercase, lowercase & numerals
• accented latin
•diactritics
• symbols & punctuation marks
• ligatures
• some glyph alternatives
• ornamental decorative elements
All "lingual" characters are functional stencils, the only exceptions that aren't stenciled are the ornamental decorative symbols and dingbats.
Cheers
This is a cloneTYPE-O-NEG4TIVE ― Avant-Garde reverse-contrast inspired sans
═════════════════════════
Experimental endeavor into avant-garde, reversed-contrast inspired letterforms.
I will explain the font in more detail bellow in the comment section.
Cheers
VOLLE BUISJES — Geometric sans-serif style
═══════════════════════════════════
[ INTRODUCTION ]
This font had derived and materialized from my previous FontStruction called Buisjes, and had innitially been planned to be made into this “solid”-style instance that would've then were to be combined and included to the original master font. That idea was later canceled when I decided not to make this part of the “Buisjes”-typeface.
I still went on completed it though, but I was now simply treating it as this unrelated new font instead.
The original “outlined”-variant still stood testimony in this second stage of development, as it served as the global basic backbone for this. But, since it now no longer was bound by accurate representation I could start utilize more dynamic sculpting techniques and make minute adjustments that incnclude some optical corrections, as well as implementing a slight more polished looking geometry.
[ TECHNICAL BACKGROUND ]
I took a clone from “Buisjes” and started modifing it into this new solid style. What I basically did was utilizing the “brick swap”-method in the FS-editor to replace every brick inside the font's “My Bricks”-palette. By doing so, essentially converting the font one-brick-at-a-time into this 1 : 1 conversion of its source without making any additional changes to the actual glyph-contours.
After a while due to some undesirable result that came from replacing the original bricks the design took a different turn when I started realizing that making an exact 1 : 1 conversion into this solid style wouldn't generate the most desirable looking font. This new solid version that was rendered from the “brick swap”-process seemed to have several optical complications, that when compared to the original outline version, had quite the different effect on its physical properties as well as the aesthetic quality of the letterforms, and had far less visual appeal. These newly presented optical misfortune also had a direct negative effect on the font's legibility. In oder to gain a better understanding as to why it took a toll on legibility some additional thing needs to be explained first, to make sense of it all later. This explains in short the visual effect of added contrast that comes from that “bi-linear”-characteristic nature of the outline version, which employs so much more emphasis to the font's overall geometric properties of various form, and therefor to the contour shape of a glyph. In return this has a direct impact on the overall effectiveness of these forms.
The reduction of this additional contrast within the font's “positive vs. negative”-whitespace balance for the solid version results in a letterform that has a rather weak representation of its several typographic components as well as for each of the individual letter-parts that form a whole, which also help to distinguish one letter from another. In simple words this means that a solid style lacks a lot of that emphasis that is present in the the original outline version, and makes for a far less pleasant and effective font.
Another issue I had with the 1 : 1 identical conversion was the unanticipated but pretty drastic deterioration of its initial “wow”-factor in the solid version that was generated. No longer beneficiary from additional added value that came with a more “decorative”-characteristic that is present within a outlined glyph contour. Also the “bi-linear”-nature of the outlined letters sort of gave the impression it was putting double the emphasis to the typographic parts and the geometric properties that make up each letterform. The rather squarish “box”-like characteristics of the lettering became much more evident in the solid glyph face. Shifting visual focus from the previously more ornate display attraction away towards this more “mechanical”-style that is this rather plain and somewhat shallow looking flat faced letter.
All of these were things that worked out just fine in the font's outlined version, but not so much in terms of a solid “filled”-like style.
Here are some of the things that cause trouble within an exact 1 : 1 conversion into solid bricks:
• Enclosed typographic elements render much thicker than what is considered “acceptable”
(requires optical correction)
• Diacritics render too thick and often too big
(requires a complete re-design)
• Radius of FontStruct's default solid circle arc connection brick is too small
‣ Making a solid font constructed from these to look compressed
‣ Arc intersection point not sitting deep enough
• Reduced emphasis in depth of geometric form
‣ Simple rather “feature-less” and “squarish”-looking geometry
(both requires numerous custom composite bricks in order to break-away from these constraints)
— The combination of the above in terms of the appropriate adjustments required to make optical corrections in order for it to have balanced proportions will have such significant impact to certain aspects of the physical presentation of the letterforms that they no longer share that seamless overlapping cohesion, and it couldn't really classify any longer as being this solid / filled style instance to the original master font.
That wasn't all (LOL) but yeah I'm done typing for now!
Hope you like it, more info follows..
Cheers
This is a clone of STF_BUISJESThe regular version for STF_UNI
-----------------------------------------------
UNI - is a all caps semi-serif 3-D outline display typeface that was aimed at college sports teams.
The font features 2 styles, regular & shadowed (cloned to a seporate fontstruction).
Shadowed version is found here:
https://fontstruct.com/fontstructions/show/1605019/stf-uni-shadow
Enjoy!
RINKEL — Bold constructivist display design
════════════════════════════════════
This was very much influenced by the rare sighting of
1974's Lettergraphics International typeface by the name 'Belden'
Belden was shown in a Lettergraphics ad in U&lc vol. 1, no. 3 from 1974, without further design credits. It was also featured in the book cover design for "Metaphysics: An Introduction" by Keith Campbell.
—Which in terms I have used for my personal extrapolation of the complete character set of this FontStruction.
────────────────────────────────────
Not a digitizing revival of the original piece, but rather a very strongly inspired personal take on it.
—More complete character set is coming soon..
Let me know what u fellow structivists think of it so far!
Cheers
MODERN TYPEWRITER - Typewriter style Slab-Serif
============================================
The idea was do a simple, clean and solid looking design that mimics the looks of a classic typewriter style typeface used for form fill writing style.
The rectangular shaped concept was carefully chosen to provide this nice mechanical looking forms, and to further enhance the technical style concept of this design.
ARS NOUVEAUX - Art Nouveau inspired display typeface
═══════════════════════════════════
A personal digital reimagination of the lettering style by "Charles Rennie Mackintosh" (1868-1928), a pioneer of the "Glasgow School of Art" and so called "Arts & Crafts" movement.
His distinctive style of lettering has been seen many revisions, revivals, reimaginations and inspired designs alike over the years, and has evolved into a broad collection of available fonts.
This basic stylistic lettering concept from Mackintosh sort-of losely funcioned as the structural guiding principle for the creation of "Ars-Nouveaux".
This FontStruction is an experimentation into creating similar flavored, but still unique letterforms within that same design framework.
First I started to layout the overall basic asymmetrical core geometry from a set of custom rectangles, half arc's and slants for each of the letters bare skeleton shape. Once I completed the full set of 36 glyphs [a/z, 0/9] These basic shaped were then further modified into more sophisticated finalized letterforms.
Caps-only, but with many alternates, accompanied by a set of ornate initials.
Hope you like it,
Cheers
This is a cloneBENGALIQUE - Contemporary grotesk type
A condensed geometric Grotesque style, that at first glimpse looks somewhat simplistic. And for the larger part this is true. The goal was to do a ever so slightly spiced up take on this 19th Century classic style.
At it's core, the letterforms have this strong geometric grotesque backbone that is easy to recognize.
While trying to preserve that unpolished characteristic classic Grotesque basic form, I attempted implementing some personal twists, hoping to make a more contemporary but faithful variation to it's crude classic renegade traditions.
Some of the more distinguishing features for this font are it's heavily condensed style, the somewhat quirky curvatures, overshoot and/-or tapered ends in certain 'sweet spots' on a glyph's leg or terminal.
At random some legs will also ascend and descend just a tiny tad bit, gently adding this extra layer of dynamic depth and playfulness.
Spurs are slightly tapered, counters, negative spaces are in mostly rectangular and do not mirror their convex outer curves, in fact the only concave curvatures within a partially enclosed negative space are those that have strokes intersecting or when a curved shape is used to replace diagonals.
(such as; "B, Kk, Ss, Xx, Y, Zz" numerals; "2, 3, 5, 8")
Note that a couple more unmentioned characters make use of concave curves as well to accentuate specific choices.
(such as; "R, t, ß, etc.")
Visual corrections and optical compensating was exclusively performed on the top part of the glyphs, not their bottom.
-- Some additional side-bearing and kerning is still required --
No filters used...
The font works best for 'Display Type' at most point size. In smaller quantities it can be used for 'Body Type' as well with some proper adjustments to the horizontal spacing. But, nonetheless the font's condensed nature, it's tight letter spacing and some thinner strokes still heavilly affect the flexibility for legible Body-Type-use.
Recommended size for Digital-Display-use is 28pts or higher, and bellow 20pts the font becomes unreadable in Digital-Display-use. But I hope you like it so far, and feel free to let me know what u guys think! ?
That's all for now folks..
Cheers
BLAUHAUS - Bold Bauhaus inspired geometric typeface.
I know there is tons of out there already, but I had to do one myself...
It's far from perfect, but it was made on a very tiny grid space, so a whole lot of space to occupy with bricks wasn't a luxury this one! (I'll demonstrate a example below)
Still I think it looks pretty rad so far!
This is a cloneSTF_THUNDERDOME - A tall thin stroked Art Deco typeface.
I tried to create pretty simple, elegant but somewhat wonky geometric letterforms.
Inspired by the later 70's Art Deco Streamline period.
--------------------------------------------------------
This remains a WIP, many of the glyphs in the Extended-Latin set aren't reflecting their Basic-Latin counter-parts. The character set remains far from complete for now, and many changes need to be made still.
Kerning done only for a few pairs and overall balance therefor is still quite poor I guess.
Some 'more' detailed but derailed towards the end 'in-depth' recap of this font could be found bellow in the comment section.
Stay tuned for more,
Peace!
This is a cloneBOOTSHAUS — Geometric "Bauhaus"-inspired modernist sans
═══════════════════════════════════
Bootshaus is another endeavour into the Bauhaus realm of typography.
Focus for this font lies mainly within it's broad choice of glyph alternate forms to select from for stylish texts or logos.
Much of the extra glyph alternative forms are loosely based on the lettering by Sascha Lobe for the Bauhaus-Archiv
Many more glyph alternative forms are planned to be included, stay tuned..
— WIP
Cheers!
STF_FRONTAL BOSSING - A groovy bold and rounded Sans Serif typeface.
═══════════════════════════════════
This is going to be my second entry in the "HeavyComp"
═══════════════════════════════════
ABOUT THIS FONTSTRUCTION:
TECHNICAL:
Grid: 17 × 16 square grid units (incl. descends, overshoots, accents)
Filter: 2 × 2 brick size
BIO:
The idea was to come up with a friendly chubby fella.
And for all I know I think I have done just that. In the end, it does seem to appear it came out with a slightly bigger forehead than the average (but, no love was lost here, we have come to learn to appreciate the misfits).
Despite its weight and slightly clumsy appearance this juicy Mr. Boogie still got dat funk, and can not wait for it to be the next saturday night.
Even so, when he for once isn't told to "Swing and Boogie" he still is nice to have hanging around. His friendly persona is only to be matched by the ever so nice soft curves. "No sharp edges to detect here".
I can only hope for that all of you come to appreciate him as well! ;-)
(Let's do this in another language as well)
CONCEPT:
The idea was to make a letterform that has a friendly looking design. I tried to achieve this by way of softening all hard convex corners with a smooth rounded curve. And by "all" I litteraly meant, even on all diagonals, accents, thin strokes and stroke tips (Nothing was left untouched).
For all the concave corners, so the negative space (white space) of the letters have multiple solutions depending on what is happening (does it curve, intersect and or wether a stroke continues or not)
The curves all have near hi-res looking (a couple of minute imperfections) but otherwise smooth surfaces, and there are multiple custom created ratios/transitions, such as:
1.5×1.5, 2.5×2.5, 2.5×3, 3×4 (+ The bullet is a 7×7 circular dot)
I hope you like it,
Cheers
(PS: Sample follows soon)
STF_CARE SENSITIVE - A modern hairline sans style typeface.
=================================================
design grid: 3,5 × 4,5 units
brick size filter: 2 × 2
stroke weight: 1/8
=================================================
I tried to incorporate rounded letter parts and corners but this was very tricky to pull off with this thin stoke weight. The font works best at small size due to very small imperfctions.
I hope you like it nonetheless!
This is a cloneHere is a gift to the community.
-----------------------------------------
This is a collection with parts and bits for small grid designs, (5x5 max) Each related to the assembly of smooth and (near) Bézier-like curved shapes and round letterforms.
-----------------------------------------
As some of you might very well know, one of FontStruct's holy grail is custom circular and curved forms. I'm talking about those not simply build with off-the-shelf bricks from the standard brick pallet FontStruct is providing.
Making these can be a very difficult process. Since the bricks in the default pallet are a far cry from what is truly possible with some clever use of FontStruct's editor features. Although obviously there remain serious limitations when it comes down to making different curves and round forms, there still is a lot room available to work in.
Most of the seasoned users know and utilize this very well, but, as with each of us, it took time and dedication in order to learn the tricks of the trade!
With a little knowledge, clever thinking and a healthy dose of outside the box thinking one can still get a lot out of FontStruct.
This font is meant to serve as a helping hand and inspirational / educative tool. Providing some insight into making numerous curving and rounded forms, various transitions, achieving different weight contrasts, and how all the various building blocks were aligned in order to make the various parts.
-----------------------------------------
Most important features used for this process are:
Brick Size filter: Must be changed to a 2×2 value in order to use the elements in this font.
All functions found in the "Modify" menu: Flip rotation and nudge are used to make alignments and to fill up the gaps.
Make composite: (also found in the Modify menu) This function will mainly be used to do two tasks, resize, modify/distort brick shape,
placement and orientation of bricks within the brick grid square for the required given composite.
-----------------------------------------
The font itself contains a collection of different premade elements divided into 3 main groups that I will list bellow. And can be found in the uppercase, lowercase and numerals sections.
[Uppercase] Various pre-assembled variations of the letter O, to demonstrate different variations for a round letterform. These were sub-divided and grouped according to their relative height!
[Lowercase] "Copy & Paste"-ready isolated parts 'n bits (curve segments, terminals) aimed at re-constructing and use in your own projects
[Numerals] Various random examples of letters that have curved/round features implemented in some way.
A fonts height probably is the most dictating parameter in type design in terms of behavior and appearance. Therefor, with the collection of pre-build vatiations of the letter "O", I choose its relative height to further sub-divide them in, rather than weight, since these are already completed letterforms. This makes up for the easiest access to a "drag/drop" adaptation into one's own project and build a full font based upon it, mainly for those that come with only limited experience.
This tool is to make one's FontStuct experience a little easier or to save time. So feel free to clone it and use the content however you like.
Re-use any of the provided elements, copy/paste the letter examples into your own fonts, deconstruct and re-use the various parts. Or simply just take a peek under the hood to see how they were build, This can be done via the "Menu>View>'Outline' " function.
There are no restrictions to how the content is used.
-----------------------------------------
More additional curve variations and different related other elements will be added soon. I have to select them from my various random works and this takes some time. Please stick with me on this one.
The intent is to try keeping this a ongoing project, so hopefully many more updates will follow and eventually turn this into a "all-in-one" tool for small grid designs. So far I also have plans for including a collection with different serif style, but this is something for a future update as well!
For now, curvatures it is!
-----------------------------------------
Note that, all content and forms in this font were created by myself and were gather from the various projects I have made, most came from published works, but some were taken from private material as well. We all here work with the same tool + limited brick set, so I am pretty sure certain elements in here were done exactly the same way by other users. Please don't accuse me of using others or your material without approval, this is just a case of unfortunate coincidence.
-----------------------------------------
[Usage]
The elements are best used by way of copying them from this into your personal projects, and work with it from there! This because the "My Bricks" pallet in this font is messy, probably very uncomfortable to work with as is. Copy & pasting them into your own font re-arranges the selected brick set for that segment into your own font's "My Bricks" pallet, making it much easier to get sense of its individual bricks.
Another very important thing is, I strongly advice not to nudge any of these what so ever, unless investigated its composition first. And I cannot rephrase this enough, seriously, never, or brace yourself for absolute dire results!
This due to the numerous counter-rotated or different directions of nudged 'into place' elements that make up a complete segment.
There are some elements included that at first seems to be looking like doubles, with onother one looking exactly the same. This is right, but these are constructed using different configurations of bricks. The reason for this is to provide alternative configurations for them. Some scenario's can make one approach to be working just fine, and the other simply not. This all hangs in strong correlation with the current nearby configuration of bricks, and simply depends on the whatever spot still remains unused in the surrounding grid. Since available grid locations to start working from are usually very limited. Its like this, Taller and/or wider letterforms meaning more available space to work from and place your bricks, but the smaller you go, the more scarce space becomes, simple as that.
So best is to use and work with this tool on a copy of your current glyph to verify no bricks will be raplaced and ruin the current glyps, and only to replace the original glyph once you're absolutely sure everything worked out well together.
If something else isn't clear or if you have any questions in regard to this tool, feel free to ask those in the comment section bellow.
-----------------------------------------
One final thing, beware that some of this elements can possibly influence the font vertical metrics (font size and leading/vertical spacing) and create addition extra line spacing. As well as the letter width. So be sure to allways double check those two when u use any of this.
-----------------------------------------
PS: My apologies for the "too much" of a explanation above, lol.
Happy structing,
cheers
Fauxhaus — Geometric minimalist modernism sans-serif design
═══════════════════════════════════
[INSPIRATION]
As the name already suggests, this indeed was inspired by the Bauhaus-typograpy towards functionality style.
More specifically by Austrian artistic polymath Herbert Bayer's 1925 experimental "Universal" alphabet.
The alphabet he designed became somewhat synonymous with the school's identity, and probably is the most well known Bauhaus typeface, and truly epitomizing that typical simplified "Form follows function" Bauhaus-minimalism style. It was also used for the new Bauhaus-building signage.
Some key features in Bayer's original form are those easily recognizable geometric sans-serif letterings, with letter composition based on strong basic geometry, having eliminated all decorative elements of the letterform composition for that crisp industrial, slight mechanical minimalist aesthetic. Bayer's original Universal alphabet also eliminated the need for a upper case letter, further simplifying it towards more of a functionality-driven standardization. Bayer developed multiple revisions and variations of the alphabet. Sadly Universal was never cast as a font, as during that era they weren't manufactured into printing typefaces, and the designs would only exist as drafts (as was the case with all Bauhaus-typefaces). Nonetheless it served as a lettering model for Bauhaus students, colleagues, and followers alike, and they were regularly re-used for signs, book covers and publications by many of its members, but even beyond institution walls the typographic style began to gain a foothold. Throughout the years we have seen a multitude of revivals and other Bauhaus-inspired typeface designs. Some of which that try to be faithful digitizations of the original, whereas others taking a more artistic approach to the style by providing their own personalized reinterpretation of the Bauhaus-aesthetic. So even to this day, many decades later, it repeatedly continues to inspire and influence designers time and again.
Bayer, First a student and later junior master of the printing workshop, was one of Bauhaus’s most influential attendees, advocating the integration of all arts throughout his career. Though not trained as a typographer, he was also assigned with the task of creating a universal visual & typographic identity for the school.—a task Bayer took very serious.Sparking perhaps the most mythic typeface to ever come out of the Bauhaus, which is "Universal"—one that at that time strove to be as idealistic as the school itself
═══════════════════════════════════
[THE "FAUXHAUS" FONT]
This is an artistic reinterpretation of Bayer's "Universal" alphabet.
Aiming to preserve the unmistakable style and simplistic geometric stylistic properties of the original, while in the same time allowing a more 'free-form'-approach towards crafting the letterform compositions. This of-course as long as they remains in-line with the stylistic properties of the original. And for the lack of having a better explanation;
—To do sort-of a 'faithfully different' artist depiction of Bayer's original Universal alphabet.
Some notable differences made in Fauxhaus compared to Universal are the re-introduction of a upper case form and the slight de-simplification and inclusion of subtle decorative nuance.
In some cases I've choosen to compose certain specific characters to be more or less identical as to how Bayer originally intended them, whereas others may be entirely different looking. And for some characters have one or more alternative form as well. Some of which are more 'ad hoc'- compositions drawn as we went when new ideas popped up. But others were specifically created to preserve and / -or include certain distinctive and unmistakably identifiable letterforms from Bayer's original Universal alphabet.
Greek & Cyrillic characters included in Fauxhaus were solely added for my personal experimentation purpose only, and they serve 'zero' function as to additional language support of the font.
"Use at your very own risk"— as these could very easily be gone the very next update.
Each letterform was meticulously composed from a random collection of the various memories, which after some thirty Bauhaus-inspired and / -or -revival works including their respective 'shared' research I have accumulated over time for Bauhaus typography like Bayer's work.
No source reference image was used as guidance for creating this FontStruction, everything came straight from the knowledge I gathered from the many previous Bauhaus related projects I did.
So to draw solely from memory alone somewhat a convincing and reasonably similar personal reinterpretation of an original 'Bauhaus' typeface at this stage has gotten pretty easy for me.
For this project in particular I've choosen to construct the letterforms on a medium sized grid, using the linear interpolation 'faux'-Bézier method. So beware that when using this font at very large point size rendering the remnants of this process will become visible!
That's all for now, I hope you like it so far,
Cheers
This is a cloneCollection of linear-interpolated circle attempts, or simply faux-Bezier circles and other curvature related materials.
This toolset basically is collection of pre-made fake circles and curves in numerous different sizes to make ones workflow easier. It could also simply serve as a educative tool that demonstrates the basic FontStruct technique used for making fake curves and circles.
Initially I intended this to be much more complete, but it is simply too much work, and would take forever to get published at once.
Please don't expect this to be perfect, a lot gets fairly close to the "real-deal".
But keep in mind that they remain raw approximations of their true Bezier counterparts. I will try to improve whatever is needed as time progresses, as well as most likely add more stuff.
--- No filters were used ---
I hope you like it so far,
Feel free to copy, re-use, improve or even destroy!
enjoy!