Gimmick font. Weirdly, Google Fonts Basic compatible.
Themed around a "black hole" in the center of each letter that deletes pixels in the same row and column that are in lines that are perpendicular to it, or replacing those lines.
mono 7x11 pixel font
times ive downloaded this font: 9
Because sometimes you need a thick scribble font.
This is a clone of FrugalFantasyMonoэто короче как vcr osd mono но лучше.
this font is like vcr osd mono but better.
This is a clone of 12x16 iskraeasily one of my largest fonts.
Includes Latin, Hebrew, Cyrillic, and more.
This is possibly the biggest font I will ever create, and probably the one I'm most proud of at that. The original was built over the course of 4 months, and I'm very, very happy with how it turned out. Along with all of the 25 basic categories, I included 23 of my own - some finished, some unfinished. This has been a long process, sometimes fun, sometimes tiring, but I hope you find this font useful. Luckily, with all of the scripts it works with, it should have a use for everyone :) Please enjoy!
I am open to comments, suggestions and any other feedback. If you would like me to add another script, I am open to the task! :)
Edit: It's been more than a year and I'm still going strong! 6731 characters total. Trying to knock-off some smaller / less used scripts. :)
Jan 22, 2024: Fully finished font! 7500 total characters.
Thanks to everyone who has liked or downloaded! :)
From the Final Fantasy Advance and DS games. Specifically the final version, from FFIV DS. I tried to make it compatible with all languages that use Latin, Cyrillic, and Greek scripts. Plus Japanese Hiragana and Katakana.
If you see problems, let me know.
CHANGES FROM IN-GAME ORIGINAL:
•Added additional letters and diacritics.
•Changed the circumflexed letters to use actual circumflexs instead of inverted breves, so I could add breved letters.
•Used half-pixels to center diacritics over letters.
•Made some diacriticized letters more consistent.
This font was last edited: 21:20 UTC 19. June 2020
I was looking for a localization friendly pixel font and could not find any that had good coverage and was not outrageously expensive ($700+) for commerical usage. Thats why I created "PixelLocale".
This font is intended to be reminiscent of the original Pokemon Red/Blue games. Too see how they differ check out this image: https://imgur.com/ixoYRtd
It was important to me to create a consistant looking font across scripts.
You can use it however you like, 100% free with no attribution. Lets make the world more accessible.
Coverage:
Latin characters (815/815),
Greek and Coptic (119/119),
Cyrillic (263/263),
Georgian (83/83)
Hebrew (86/86) (Fontstruct has poor support form Niqqud and Cantillation)
Bopomofo (37/37) (Need feedback)
I'd love to add more scritps. When I started my goal was to have every glyph supported by Fontstruct, but after learning that support for many asian scripts was limited I halted. If someone can shed some light on these limitations and how severe they are and for what scripts they apply, please let me know. I can be reached at "johste[at]chumpware[dot]com".
I finally made a folded-/ribbon-style design. This one contains a number of experimental techniques. Most notably, the swept parts of glyphs are allowed to extend beyond the letterwidths and sometimes even the baselines. This enhances the sense of movement, creates some interesting linkages, and reduces the need for kerning.
All of these shapes can be constructed with paper or ribbon, although lots of clever folding tricks, doubling, and pinning down/securing with glue would be required.
Alternate tilde on "±".
Third iteration of Tangereen with a bit of Paradoxy Effect. This one is rather fancy, so probably best used as a Display font.
The center portions of these glyphs make me think of sliced oranges and moon phases. They could act as cabochon settings, as well! So you could use these shapes to make jewelry set with a birthstone, monogrammed pendants/insignia, and so on.
A skeletal version of Modron March.
This is a clone of Modron MarchI use multiple text editors, and made this font to be an alternate font for Windows Notepad.
This was designed to be similar to Marengi Mk2, the font used in my FS Tutorials. Apart from using a smaller grid size, Eglantine achieves a closer line spacing through the use of short ascenders/descenders and the removal of the dots from i and j. It is also more condensed and optimized for speedreading, resulting in a font that is pleasant to read despite being quite small.
This design does have some wasted matrix, but this is necessary to achieve the desired effect. The global matrix is still only 7px tall, so this can still be used on most small canvasses.
*
Original Size: 4.5pt
A continuation of Tangereen. This version took a lot of figuring out and a lot of changes, both aesthetic and structural. I managed to make it different from other double-line designs like Glitzfang and Junglira while still keeping it simple and cute.
This is used in FS Tutorials, FS Idea Soup, FS Obscura, and most recently, AMFA's 3D printed parts.
This is a clone of TangereenA design that combines tropes from fantasy, sci-fi, and sports in a subtle and pixel-optimized way.
Structurally, this looks like a high-res version of Marengi Mk2. There are still plenty of differences between the two, but since they seem equally readable to me, I'm tagging this as a chat font.
A design that combines decolike asymmetry with a double line concept. It also incorporates some experimental methods to unify the wider glyphs (mw@#™, etc.) with the others, by allowing the middle sections of these letters to have both the single and double lines. This results in a look that is at times architectural and at other times almost like loopy cursive.
A font which uses some custom macaroni bricks. This one has the same kind of structural asymmetry as Phenomenologist. Angles and corners on the left are almost always sharper than those on the right, which gives glyphs a structural asymmetry as well as a sense of rightward momentum. This technique also imparts variation to some otherwise very similar letterforms (bdpq, mw, sz).
This is named for a species of android from Doctor Who.
*
Other design decisions:
- Make the ascender height shorter than the uppercase
- Use squares for dots/diaresis and circles for punctuation, so that they are more quickly distinguished
- Allow the sharp curve and gentle curve to swap positions when it's beneficial to the glyph (BX8&)
- Incorporate angled lines into several glyphs so that none of the glyphs which have them seem out of place (SZsz012569*~$)
- Ignore the other design decisions for glyphs which need a standardized look due to their use in programming and other syntax-based forms of writing (most symbols & punctuation)
Version 1.1: Improved gy&Ѐ.
*
A greatly condensed Modron March.
This is a clone of Modron MarchIteration 4: Basic Latin kerning finished.
*
DOODLE DOODLE DOODLE!
*
Design Rules:
1. Letters with spurs will have the spur begin at the baseline. This provides the distinctive "high heeled" look.
2. Any letter whose traditional design has a straight vertical line on its left side will keep the line, no matter how the lines of the actual letter travel.
A quirky Pseudostencil design with a central horizontal slot going through it. The "slot" is 1 brick tall for lowercase and 2 for uppercase, and becomes a vertical slot for numerals and certain symbols.
This is named for the cowboy and lasagna emojis. These were repeatedly added to then removed from several popular chat clients and websites. Changing emoji standardization or government conspiracy? YOU DECIDE.
Asymmetrical alien techno stencil.
This uses some experimental techniques, of course, but I'm not sure how to concisely explain those. Let's just say that each type of line bend and line connection has a rule associated with it. These get naturally modified by the structural asymmetry the font has so that simple rules appear in many forms and variations.
A vaguely Courierlike OSD (Onscreen Display) font which tries its best to be casual. The name is inspired by the old computer joke: "Who is General Failure and why is he reading my hard disk?"
No filters or faux-beziers, just stock bricks and a bit of stacking/nudging!
*
More about the design:
It started as a doodle and an attempt to make a smooth, low-resolution, low-poly font, and then it became a Courierlike. I have other fonts that tried to do polygonal round shapes before this (such as Cartoon Riot) but this design is my first real success in this area.
Initially, I made the angled glyphs before the round ones. I didn't want to change the angled ones, so glyphs like C, O, and Q became a bit wider than they are tall. I'm quite fond of this, because in most designs these glyphs tend to have a tall and narrow character. I think the mildly squat look of this font makes it cuter and gives it more personality.
A lot of glyphs were altered in specific ways to look more like metal type, especially anything with diacritics which touch the letters themselves. Other glyphs were altered specifically to be interpretable at small size. I also use angled contours and actual round bricks alongside each other within the same glyphs, another technique which is geared toward style and interpretability at small size.
This font came with many new challenges and an array of new techniques had to be designed. Loops were an insurmountable challenge because of the low resolution and heavy line weight, so I drew rounded areas to suggest them. You can see it on letters like Greek γ, ζ, and ξ.