ZEPHTON (Pro) — 70's future retro / sci-fi style typeface
═══════════════════════════════════
[ INTRODUCTION ]
A revival of the Sci-Fi lettering used by the “Atlantic Toy Company” for their “Galaxy Serie”. A science fiction themed toy line that was manifactured from 1978 to the early 1980s.
The lettering seen on their packeging uses a modified and filled version of a typeface called Paperclip Contour, which was designed by Dutch graphic designer Ad Werner, and was issued by Mecanorma in 1973. There is very little information provided on the web in regard to the original typeface by Werner. And even fewer images. Nothing that show a complete character set, only FontInUse submissions. But taken from the research I conducted I can safely conclude that the original Paperclip Contour typeface has just one style, which is outlined, and that it includes a lower case(a-z) letterset with numerals and just a had full of symbols and punctuation.
That being said, this actually is the second revision I did for the lettering. The innitial first version had a super basic character set, as well as a couple of mistakes included alongside some compromises in respect to certain glyphs. This was due to the limited knowledge I had in regard to the use of the FS-editor at that time. So the font wasn't 100% accurate. This newer version correct most of the inconsistencies that were present in the older version.
Due to the incomplete resource material on the original Paperclip Contour by Werner I can't check accuracy of this newer version. But I think that apart from the thicker weight in Zephton its 99% accurate.
Where the older version ran short by a lot, this new revision in fact can qualify as a full font, with everything from numerals, symbols, puntuation marks as well as accented letters for more Latin languages. And ever some glyph alternatives. Making this much more of a functional font.
[ THE FONTSTRUCTION ]
The font is a “Unicase” style typeface that has only “Minuscules” included. There are glyph alternate forms for several letters as well as a secondary set of numeral figures. These characters are located in the Unicode blocks for “Halfwidth And Fullwidth Forms” and “Private Use Area 1”
There is also a full (a-z, 0-9) alphanumeric set with “Contour Outlined” glyph alternative forms, which is located in the “Private Use Area 2”
The font saw a major update that tied everything together, and sort of finalizes the font for proper use.
Several characters have received minor adjustments in order to find a balanced harmonic distribution of typeset material. Also several improvements have been made to the overall shape and form of various characters. In addition to that numerous new characters been designed, expanding the character set even further.
Work also continued in the metric department, building the kerning table, that contains 2368 stored kerning pairs so far. Spacing was reduced by 50% to tighten the letter fit significantly. To round things up and convert it into a more functional typeface some of the characters were rearranged and/or relocated to different Unicode blocks.
═══════════════════════════════════
[ CONTOUR OUTLINED GLYPH ALTERNATIVE FORMS ]
The contour outline glyph alternative forms are not 100% accurate conversions of their solid counterparts. This due to minor design difficulties that simply made it impossible to fully execute it at its current size and with this thin stroke weight. The deformities are simply the result of a lack in fully smoothened stroke contours in some of the transitions from diagonal to curved parts. These flaws are minute, and mostly only noticable at large size rendering, but nonetheless present. In small to medium size text these imperfections are hardly visible, and pose no real problem. Anyway.. the contour outlined glyphs are still very close approximations nonetheless, just so that it happens to be with a small number of tiny imperfections.
As a direct result of this the two sets with glyphs do not fully match and therefor not seemlessly overlap.
This can be ignored for most part in the majority of the font's application, but it does create two important limitations:
1) Contour outlined glyphs are unsuitable for vector path outline rendering when the stroke alignment is set to "Outside" (Configured like that with threshold for the corner point angle set to sharp these imperfections in the glyph contours can generate spikey disruptions to appear in the stroke rendering).
— So this configuration should be avoided.
2) The two styles are unsuitable (or incompatible) with stacked “multi-layer" overlay text compositions.
— Simply due to the fact the two variations aren't a 100% true match.
They do on the other hand, combine perfectly side-by-side in text composition.
═══════════════════════════════════
[ MORE LIKE THIS ]
There is also this other FontStruction that was inspired by Ad Werner's font Paperclip Contour, called Neue Werner Paperclip, this one was crafted by fellow memberfunk_king
Thats it for now...
Cheers
This is a cloneSTF_VAQUUM 67 - A MICR style font
The font is loosely based on a screenprint named "Vacuums"
taken from a 1967 portofolio work by Eduardo Paolozzi.
It's not an accurate 1:1 copy, instead I tried to make it slightly more proportional version inspired by the original work. The font is done in all caps with some glyph alternatives in the lowercase string in order to slightly more accurate mimic the original print text.
===========================================
The original print was most likely based on the "Westminster" typeface
that was designed by Leo Maggs and was inspired by the MICR(magnetic ink character recognition) system used on bank cheques.
Several other imitations of Westminster are out there, with most well known probably being the "Data 70" typeface.
Cheers
STF_FRONTAL BOSSING - A groovy bold and rounded Sans Serif typeface.
═══════════════════════════════════
This is going to be my second entry in the "HeavyComp"
═══════════════════════════════════
ABOUT THIS FONTSTRUCTION:
TECHNICAL:
Grid: 17 × 16 square grid units (incl. descends, overshoots, accents)
Filter: 2 × 2 brick size
BIO:
The idea was to come up with a friendly chubby fella.
And for all I know I think I have done just that. In the end, it does seem to appear it came out with a slightly bigger forehead than the average (but, no love was lost here, we have come to learn to appreciate the misfits).
Despite its weight and slightly clumsy appearance this juicy Mr. Boogie still got dat funk, and can not wait for it to be the next saturday night.
Even so, when he for once isn't told to "Swing and Boogie" he still is nice to have hanging around. His friendly persona is only to be matched by the ever so nice soft curves. "No sharp edges to detect here".
I can only hope for that all of you come to appreciate him as well! ;-)
(Let's do this in another language as well)
CONCEPT:
The idea was to make a letterform that has a friendly looking design. I tried to achieve this by way of softening all hard convex corners with a smooth rounded curve. And by "all" I litteraly meant, even on all diagonals, accents, thin strokes and stroke tips (Nothing was left untouched).
For all the concave corners, so the negative space (white space) of the letters have multiple solutions depending on what is happening (does it curve, intersect and or wether a stroke continues or not)
The curves all have near hi-res looking (a couple of minute imperfections) but otherwise smooth surfaces, and there are multiple custom created ratios/transitions, such as:
1.5×1.5, 2.5×2.5, 2.5×3, 3×4 (+ The bullet is a 7×7 circular dot)
I hope you like it,
Cheers
(PS: Sample follows soon)
Unicase font with lowercase zone used for alternates. You can take these additional glyphs to enhance matching letter pairs or the overall look of the design. Old style flavor and Cyrillic inspiration, but eroded. BTW, you will also find a free "c" in the "¢" glyph. See at big size and enjoy with it, please.
Xploring thin sides.
This is a clone of zlowler2 eYe/FSWhen I saw the New Year's greeting from the great geneus1 I started to think about how a font would look with the height of the capital letters equal to the lowercase x. This is the result. I hope you like it as much as I do.
This is a clonethis font was created for the logo of my discord server, "DOLPHIN." it was actually my first fontstruction, but has undergone some revisions and is now being released publically. it is heavily inspired by the font "FUTU" by emil bertell.
042718. Thor Ragnarok is the funniest of all the Marvel films. I can watch it over and over. There is so much respect for Jack Kirby’s art style all over land of Sakaar. Growing up I never really appreciated Kirby’s artwork, as I leaned toward more graphically detailed artists. It wasn’t until much later that I recognized his great contributions to the entire language of visual expression in sequential art. I’m sorry I didn’t create this for the opening, but here it is for Avengers Infinity War.
Out of 111 bricks used, only ten are from existing bricks; all the rest are custom bricks. There would have been a lot more bricks if most weren't rotated or flipped.
3 bricks tall.
A logotype for retro-tech hardware inspired by Roc Mitchell's Corporate phototype series (aka Limited/Limited View and Logos/LogoStyle) from the 1970's. Free for personal use only. Alternate characters list: @ - P * - J # - L < - A > - t ^ - e { - F } - R ~ - K © - g ® - D § - S ¤ - E ‹ - A › - A ¹ - A ¼ - 4 ½ - m ¾ - w ² - V ³ - V ª - a « - p » - q † - f